DMT D10E 10-Inch Dia-Sharp Extra-Fine Bench Stone – Clea
The DMT Difference
Since 1976, DMT has been in business to do just one thing: make the world’s best diamond sharpeners. Product innovations such as our signature polka-dot interrupted surface, and others with our continuous surface of high-performance diamond, are praised worldwide for their superior quality.
From pocket-sized whetstones to heavy-duty bench stones, the difference arrives time and again through our undivided pursuit of sharpening excellence.
For DMT products, no oil or pressure must be used to sharpen the tool or knife.
Quality must be manufactured, not fabricated
Diamond Coverage differs widely from one manufacturer to the next. For long-lasting performance, DMT makes certain that each sharpening surface carries the most diamonds per square inch in the industry.
Diamond Uniformity is also key to sharpener performance. DMT uses a proprietary process that ensures near-perfect consistency in grit size. The result is a micronised monocrystalline diamond that covers evenly across the sharpening surface to prove effective with every use, year after year.
Beware of imitators!
Surface Flatness can mean the difference between a well-honed tool and one that is barely serviceable. Flat surfaces maintain consistent, even contact with the edge to produce a bevel that carries the same degree of sharpness from end to end. DMT sharpeners are engineered to be the flattest on the market, and built to outlast other products, which are variable in surface, and often warped, hollowed or grooved.
DMT Benefits
- The most diamonds per square inch in the industry
- Near-perfect consistency in grit size
- The DMT sharpener produces a clean, razor-sharp edge
- Best Surface Flatness
DMT – Applications
| | | | |
|---|---|---|---|
Home and CulinaryDMT Diamond Sharpeners will quickly sharpen the hardest stainless steel kitchen cutlery while removing a minimum of material from the blade, unlike electric sharpeners. Whether you have a Chef’s knife, a Sashimi Knife, Ceramic knife or even a steep angled meat cleaver, DMT kitchen knife sharpeners can do it all. | Gardening and LandscapingHone pruners, knives, loppers, edgers, axes, shears – even lawnmower blades. DMT sharpeners enable gardeners of all skill levels to keep all of their gardening and landscaping tools in top condition. With a sharp edge, garden and landscaping tools produce smooth, clean cuts that are better for plants. | Outdoor Sports and TacticalOutdoor Enthusiasts worldwide prefer the award winning DMT products to care for their edges. They withstand harsh environments and sharpen all kinds of knives, tools and edged equipment that hunters, hikers, rock climbers, adventurers, campers and sportsman rely on to survive and enjoy the outdoors. | WoodworkingSharp tools make every job easier. Unleash your creativity with woodworking tool sharpeners and chisel sharpeners that work with you, not against you. Our woodworking tool sharpeners are valued by woodworkers who want effective, precise sharpening for all of their tools. |
DMT – Product line
| | | | |
|---|---|---|---|
DuoSharp and Dia-SharpThe first rule of shop maintenance is sharpen your tools. DMT Diamond Whetstones, DuoSharp Bench Stones and Dia-Sharp Bench Stones, are renowned by woodworkers and others for their remarkable sharpening speed, precision flatness and ease of use. | Diafold and Mini-SharpThe lightweight DMT Diafold and Mini-Sharp sharpeners are easy to use. The compact models are ideal for on the way. During transport, the handle is used as a protective cover for the diamond surfaces. | Guided SharpeningThe DMT grinding systems enable a professional edge care, regardless of the manual skill. Both novice and professional will enjoy precise, professional, consistent sharpening results. | Diamond SteelDMT Diamond Steel Sharpeners combine high performance diamond and ceramic sharpening surfaces with the realigning and convenience of traditional steels for sharper results! DMT sharpening steels truly sharpen- not just hone. |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Innovative, precision flat two grit diamond sharpener featuring both interrupted and continuous diamond sharpening. | A hardwood box of 3- 6 inches Diamond Whetstone sharpeners makes a perfect gift. | Dual purpose with compact convenience, the Double Sided Diafold Sharpener offers two 4 inches x 1 inches Diamond Whetstone surfaces in one light-weight, portable sharpener. | For professional sharpening results, regardless of skill, depend on DMT Aligner Kits and Accessories. | Fast honing diamond surface with the realigning function and convenience of traditional butcher’s steel. | DMT’s precisely engineered Dia-Sharp Bench Stone with continuous diamond surface assures consistent, even sharpening every time. | |
| Related Applications: Knifes, scissors, tools AND featuring a continuous zone for small and pointed tools | Related Applications: Woodworking, home, culinary, hunting, and more | Related Applications: Home, camping, toolbox, pavilion and more | Related Applications: Handworked, culinary and outdoor sports. | Related Applications: Chef knife, carving knife, fillet knife, paring knife, bread knife, skinning knife | Related Applications: Woodworking and culinary. | |
| Models: WM8CX, WM8FC, WM8EF, WM8EF-WB, W8EF-H-WB. | Models: W6X, W6XP, W6C, W6CP, W6F, W6FP, W6E, W6EP, W8X, W8XNB, W8C, W8CNB, W8F, W8FNB, W8E, W8ENB and available in durable plastic storage case. | Models: FWCX, FWEF, FWEEE. | Models: ADELUXE, AKFC, AKFNR. | Models: DS4F, DS2E, DSOF. | Models: D8XX, D8X, D8C, D8E, D8EE. Size: 6 inches, 8 inches, 10 inches and 11,5 inches. | |
| No oil is needed – sharpen dry or with water. | No oil is needed – sharpen dry or with water. | No oil is needed – sharpen dry or with water. | No oil is needed – sharpen dry or with water. | No oil is needed – sharpen dry or with water. | No oil is needed – sharpen dry or with water. |
| Weight: | 0.16 Ounces |
| Dimensions: | 35.56 x 16.51 x 8.89 cm; 4.54 Grams |
| Model: | D10E |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Quantity: | 1 |
Great size stone, little bit praise but to me worth every penny.
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
Is good to use, very flat and sharpens quite well with my Damascus knife
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
I’m sharpening everything in my shop with a series of these.
Amazing, found this has been great for sharpening kitchen knives to woodworking tools and more. High quality with some weight to it. Could have gone with the smaller 8″ but happy I went big and got the 10″ sharpeners.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
There are many ways to achieve sharp tools, but the DMT stones surely are among the best. No mess and daily wear with the need to flatten often (as with waterstones, of which I’ve used the older softer ones, and the newer harder ones), and these DMT products cut faster and better than traditional oil stones.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Works as advertised. Very flat and true. Careful not to bang the edges on hard objects as it will displace the base metal and make a high spot on the diamond surface.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
Not sure how long it will hold up, but I’ve been using it pretty extensive over the last year and it seems to be holding up. A few areas seem to be “worn” more than others, but still have some cut to them.
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!
If you have a flat surface available (such as a scrap piece of cut & polished marble (1/2″ thick), you really don’t need a holder. Just use some non-slip material between the DMT and the surface. Even a wet paper towel will work. The DMT comes with 4 non-slip rubber feet but I am cautious about only using 4. AL at this thickness will deform slightly with pressure and I’d rather be safe than sharpen a plane iron with a convex shape. 8 or 12 feetsies should be OK with a 10″ stone. Or just rely on your flat marble!
Yikes! 4″ wide! The alternative is 2.5″ wide and a little longer. 2.5″ is getting a bit skimpy for some of my plane blades. I’d rather have the greater width. And my long spoke shave blades can be tidied up by going across the narrow dimensions.
And…amazingly…you won’t ever have to flatten these puppies! That’s a big time saver, as I usually flatten my water stones after about 10 minutes of use.
I’ll also recommend Veritas’s MK.II Honing Guide. Makes irons and chisels SCARY SHARP! My fingers prove it!
Nice products!