ELEGOO Saturn S 3D Printer, MSLA UV Resin Printer with 9.1 inch 4K Monochrome LCD, Air Purifier, Speedy Printing and High Precision, 196x122x210 mm Larger Printing Size
Bigger and Better
Elegoo Saturn S is a large-volume 3D resin printer that has found a way to increase build volume without sacrificing part quality. By increasing both the size and the resolution of the masking Mono LCD, the Elegoo Saturn S is able to offer 48 micron at XY resolution of the while increasing the total build volume. You will be surprised and impressed with how easily the Saturn S could handle a large and complex build. And the overall trouble-free printing experience makes it appealing to beginners as well as more advanced users.
ELEGOO Authorized Distributor
We has established the very stable cooperation relationship with ELEGOO for years, and alwasy focus on providing a high-end 3D printing paroduct in resonable budget. The professional technical support team from ELEGOO OFFICIAL is always ready for help.
ELEGOO Saturn S 4K Monochrome LCD MSLA 3D Printer
| | | |
|---|---|---|
Exclusive Screen ProtectorSpecially designed screen saver with high transparency, protect LCD screen from damage of resin spill and scratch, not affect the printing efficiency and quality at the same time | Stable Performance, Consistent ResultsDouble Z-axis linear railway for more stable and accurate moving, sandblasted surface build plate for stronger adhesion, ensuring consistent printing results | Advanced FEP Film 2.0Thinner film and lower release tension, help the prints stick nicely to the build plate and protect small supports from broken, improve completeness of your prints |
 |  | |
|---|---|---|
| Build Volume | 196x122x210mm /7.7×4.8×8.2 inches | 192x120x200mm/7.55×4.72×7.87 inches |
| LCD Screen | 9.1 inch 4K monochrome | 8.9 inch 4K monochrome |
| XY Resolution | 48µm, 4098*2560 | 50µm, 3840*2400 |
| Build-in Air Purifier | Yes | No |
| WLAN Printing | No | Yes |
 |  |  |  |  | |
|---|---|---|---|---|---|
| Feature | 6″ mono LCD, 129x80x160mm printing size, great for beginners | Equilibrium in all aspects, great for beginners | Balance of tenacity and strength | Water washable, no need IPA | Advanced version with metal extruder and PEI surface build plate |
| Dimensions: | 60.71 x 36.58 x 31.24 cm; 9.98 Kilograms |
| Manufacture: | ELEGOO |
| Origin: | China |
| Reference: | UK-YC-3D-MSTS |
Great quality
This is turning out to be an excellent machine. I started using the Rapid resin to go with it and I am getting prints in a third of the time.
Rapport qualité/prix imbattable
Imprimante facile et rapide, je n’utilise que de la rsine elegoo rapid avec le profil “fast” par dfaut sans rien retoucher tout sort impeccablement bien, pas un seul fail jusque la avec une vitesse suprieure a 10cm par heures en layer 0.1, je ne l’ai pas calibre au mieux pour grapiller encore mais je suis certain que c’est possible, en attendant avec le profil d’origine en fast la vitesse est suffisante et la qualit trs bonne donc pourquoi toucher?
J’ai eu une anycubic il y a deux ans environ, la m3 plus, c’tait pas la mme chanson lente et beaucoup de fails la c’est vraiment diffrent, le plateau est assez grand, trs facile a calibrer, facile a enlever aussi, pas de chichi de camra de pompes etc juste un plateau assez grand et une taille en hauteur trs satisfaisante par rapport aux 20cm de moyenne des autres, avec 26cm il y a de la marge pour faire de grandes impressions.
Sous chitubox j’envoie les impressions pas wifi, jamais aucun souci avec les profils par dfauts et les soutiens par dfaut, bravo Elegoo, la mme avec la taille d’impression de la jupiter SE c’est pour quand?
bonne imprimante
update septembre 2024
pour une raison que je ne peux pas expliquer, l’imprimante n’arrive plus faire la calibration du plateau J’ai des claquage Malgr que je suis drastiquement, ce qui est crit dans la notice d’utilisation, il y a un bug, l’imprimante est inutilisable
Merci Amazon d’avoir fait le ncessaire.
mars 2024:c’est une imprimante qui est trs satisfaisante
Qui ralise parfaitement les impressions une bonne surface un bon bac c’est trs agrable agrable
Parfai
Trs bien . dommage que la rsine soit chre . Ne chercher pas les couleurs du Mario : il est en plusieurs partis Paint a la bombe et verni . je verni tous mes objet .
La machine ce nettoy parfaitement sauf le cache en plastique noir .. L’cran un coup alcool et un coup de chiffon de chiffon lunette et ses parfait. le logiciel CHITUBOX est parfait surtouts avec la mise a jour ,maintenant on peut creuser l’impression et en plus faire un trou pour bien le vid . attention faut boucher le trou avent de le mtre au nettoyage dans le bain d ‘alcool . On peut mme imprimer des photos franchement c est bleffant . Vous charger une photo JPG avec logiciel 3D cura. vous exportez en stl , aprs utilisez Builder 3d de Windows pour corriger le fichier et vous avez plus qu’a imprimer avec CHITUBOX. La tte de la personne dois tre prise sur un fond blanc et sur la tte de la personne les couleur doivent tre claire Partout. quand l’impression et fini mettez votre photo en rsine devant votre fentre de la maison et vous verrez.. photo impression plein et pas plus de 3 mini mtre .
I’ll keep it short, best 3D printer I’ve had. You absolutely need to make an adjustment in any software you use to increase the bottom layer exposure time to avoid failed prints. Since changing the settings I’ve not had one failed print in over 100 mini prints. Also, a tip is don’t use the supplied card to level the build plate, put the vat on, make sure the build plate is attached but bolts are unscrewed. Then lower to zero into the vat, use one hand to gently apply pressure over all sides and tighten the bolts. YouTube will a friend to help if too confusing.
I am very pleased with this machine, I ordered this after ordering 2 different anycubic machines that needed returning after 3 prints each due to screen failures. I wish I had gone with this machine first. I cant give full stars on tech support as I haven’t had to use it. as for adhesion, I have had a couple of failed prints. mainly at the start, the level card that comes with machine is too thick, after a little research online I used a single A4 piece of paper and that worked perfectly. need to level frequently to avoid failed prints as can become unleveled while removing prints, overall I am pleased with this machine, I’ve only used factory settings so far and haven’t explored at full speed so prints are taking a little longer than I’d like.
print quality is great, even at 0.050 layer height, layer lines are hard to see. looking forward to printing something of HD to get the most out of the 8k screen. I’m very new to resin printing so still got a lot to learn, however I would definitely recommend this machine for a novice like me. I have so much I want to do with this machine, I don’t have enough time in the day lol. the print software that comes with machine is OK, I do use it alongside another program as its only basic. at the price of these printers, it would be nice to be given the pro version with the purchase. but unfortunately you would need to pay about 160 a year for it. this is the only disappointment I have.
all in all, thank you Elegoo for producing this machine, I look forward to more exploration to its capabilities when I’m more experienced myself.
3D printer.
This takes a few goes to get used to it, but this works brilliantly making your own models. So many STL files out there, you practice a bit and once you get used to it, you will not look back.
Love i
I have this printer, a Mono X and an original Photon. This, in my opinion is far easier to live with than the Anycubic. Having said that, it has it’s issues that I simply don’t have the time to deal with. The fans are already really noisy … had the same issue with my Mono and the resin fumes seem to be effecting the hood, again had the same issue with my Mono X, I also hate the fact that the power switch is on the back which makes it awkward to get to and certainly isn’t a viable emergency off button.
Having said all that, when it’s on a print, after initial start up, it’s quiet, quick and makes great prints. There are always improvements that could be made but I like it.
As expected from Elegoo
Product quality is as expected from Elegoo. Hardly any set-up required. Ready to print in less than 1/2 hour from unboxing. This is my second (and bigger) Elegoo printer. Eagerly awaiting their Mercury X Wash & Cure station as print plate is too big for Mercury Plus.
A great quality large build plate printer with fast print times
A great quality large build plate printer with fast print times, looks great aswell. I was rrally pleases and excited to receive my printer very quickly from.amazon amd at the best price also.
Excellent customer support on hand to help with any issues, spare parts and consumables readily available on amazon at the moment aswell which is reassuring to know.