Excelle Had a load of render to hack off, was going to hire a demolition hammer for 25 a day. Saw this thought I give it a try, went through it, like a knife through butter. Great bit of kit, cheaper than highering.
Value for money with reliability For the money you can’t go wrong. I was going to hire one but was 60 so bought this instead and did a cracking job of digging out some steps and concrete base. Excelle
Worth every penny Purchased to chisel through an old fence foundation (about 40cm x 30cm x 2m) made of concrete to make a small hole for planting and wasn’t sure how well this would work. I was pleasantly surprised.
Don’t get me wrong the bigger heavy duty breakers would have done the job quicker but would have cost 100 more and less versatile. This however cuts through concrete with relative ease and after about 2 hours I had my hole.
Very sturdy piece of kit and the chisels still don’t even look used. I bought this in a lightning deal at 49.99 so it was a massive bargain and hugely impressed with the quality.
Pleasantly surprised Good value for money. I had a couple of jobs lined up for this and it was almost as cheap as hiring one. Needed to break up and remove an old concrete base for a rotary washing line and it made easy work of it. Probably not good enough for professional use but def good for diy. Recommend
Sturdy and packs a punch This is a great SDS Drill. Incredibly tough and does exactly what it says on the tin. Helped me pile through concrete fence post bases in no time. Bayonet filling to the chisel set.
breaker drill I bought this to break a wall from top to bottom which meant breaking breeze blocks in half. It chopped off the piece I needed gone in half an hour or so. Definitely paid for itself and I still have a very capable drill and breaker. Well worth the money.
Great bit of kit. I purchased this kit to put a garage defender lock in. Done the job in 15minutes.
Extremely powerful, good accessories.
Would say the instructions could be slightly better but excellent for the money.
quite heavy but packs a good punch I read another review where the hammer action was very weak.
I found this as well but I figured I’d check the oil level. When I opened the filler cap the reservoir was packed with grease. The instructions say to use engine oil, so i scraped the grease out and filled it with oil.
Works like a charm now. really strong hammer action. I would recommend this fix to anyone.
Perfect for what I needed it fo Spent over an hour with a hammer and chisel to try and remove paving slab dabs of cement so I could re-lay the slab. This machine broke up the cement in minutes. Was like a knife through butter. Let the machine do the work.
Great value for money. Did the job perfectly. This was a great product for the removal of excess concrete we found while remodelling our patio. We managed to complete the job in a speedy and effective way.
Well worth the price I bought this SDS drill after reading reviews. It’s not so heavy to use as reviews mentioned. I’m not a big strong bloke but I’ve used it one handed to break concrete post mix. This drill comes in a good case with a point chisel and a spade chisel. 3 useful sized drills too.
I bought it because I’m doing up my rear garden and concrete post mix has popped their heads which a hammer and chisel had no effect. This MPT didn’t break the concrete like a hot knife through butter but it did break 18″ thick concrete quite admirably. Well worth the price. Its a drill I’m glad I bought.
Good value for money Bought this for the chisel mechanism to break up some concrete foundation beneath a garden ramp I removed. Really easy to use and made easy work of breaking up the concrete into more manageable chunks.
The drill has a fair weight to it, but this is to be expected for the nature of the jobs it is intended for.
Incredibly good value for money, especially if you only plan to use for the odd one off job. It was certainly cheaper for me buying this and carrying out my own work than accepting quotes around 1000 to get the job done.
The best on the market for the price! This drill is top ranking, I’m the original Jeremy Clarkson when it comes to building work but this drill made everything so easy, easy to set up and use, went through concrete with ease.
Pro Standard, good value. I’ve just received one of these. I probably didn’t need this beast! I chose this one because every review I read of other drills said they were too weak to get through brick & stone. My ancient 1970’s Black & Decker could make no impression in our garage wall, so I had to replace it. I barely even switched this thing on and it was straight through. Incredible. This is very powerful indeed. If you want something to chisel channels into the walls for wiring for example, this machine is your buddy. Fantastic, buy with confidence.
Pro Standard, good value. I’ve just received one of these. I probably didn’t need this beast! I chose this one because every review I read of other drills said they were too weak to get through brick & stone. My ancient 1970’s Black & Decker could make no impression in our garage wall, so I had to replace it. I barely even switched this thing on and it was straight through. Incredible. This is very powerful indeed. If you want something to chisel channels into the walls for wiring for example, this machine is your buddy. Fantastic, buy with confidence.
Great piece of ki Worked on building sites for several years using kango hammers to break through walls. This is as powerful easily! Completed the access hole above in less than 20 minutes. It isn’t light but if it was it wouldn’t have the power it does. Goes through bricks and mortar in seconds. Tip, have both point and chisel to hand because it drives in so quickly you can sometimes get the bit stuck. Release it from the chuck (very simple) and put the spare bit in and break the brickwork to get the other one out.
Love this breaker.
User operating instructions need updating, as they are incorrect and unclear. At my second attempt, I drilled into a concrete lintel with the hammer action in less than a minute. But, I had to go online to follow the instructions for a very similar drill. It appears this drill may be an example of “reverse engineering”. I will be contacting the manufacturer about the user guide. Otherwise, I am now happy with my purchase.
User operating instructions need updating, as they are incorrect and unclear. At my second attempt, I drilled into a concrete lintel with the hammer action in less than a minute. But, I had to go online to follow the instructions for a very similar drill. It appears this drill may be an example of “reverse engineering”. I will be contacting the manufacturer about the user guide. Otherwise, I am now happy with my purchase.
Great value !! Heavy duty SDS masonry drill with chisel action. Having never used one before or even seen one being used I took a chance as I had really bad pointing and stonework to sort out. The drill is nicely boxed and comes with two chisels and three drill bits. also a depth guide, spare brushes and grease. The chisel action is amazing and has completed the work in next to no time. Well worth the money and would highly recommend.
Brilliant! Brilliant drill, I work for a agricultural installation company so it gets a work out on farms. I am very impressed at how quick it drills 14mm all day without complaint or getting too hot! It even out performs the bosses Bosch professional drill! Would recommend to anyone, from DIY users to industrial users.
Superb tool - and excellent value for money Bought this to break up concrete at bottom of fence posts – and this tool makes short work of that task.
In fact you need to watch out for the strenght of the hammer function when using the chisels – very easy to hammer too deep into the concrete and end up getting the chisel stuck.
And the SDS/Slotted Drive System makes switch of chisels / drills is so easy – just pull back the chuck and change drill bit 😉
A perfect addition to anyones DIY tool collection.
Only very very small negative point i found when using was that the mode switch initially was very stiff/hard to move
but after a couple of turns it loosens up.
Has good sides and one major bad side I bought this to take down a garage, which it did pretty well.
However, the dust from the bricks got into the fitment and now I cannot remove the chisel bit. We’ve tried all sorts a it stuck fast. So if you go with this model, I’d suggest stopping every now and then to clean out the fitting to ensure the bits are easily removed.
Works extremely well for small jobs Used to break up a concrete path to put in posts.. great tool for light concrete. Did the job nicely. Not suitable for heavy stuff. But for a small hammer it works extremely well
Great bit of kit! Needed to break out old fence posts and concrete to install new fence posts. Originally looked at hiring one, then saw this on Amazon! For 90 quid, I thought “worth a punt”! Glad I bought it, done the job effortlessly! Also with chisels and drill bits, nice addition to my tool collection.
Suitable Replaceme Bought to break out concrete around fence post after previous ‘other manufacturer’ drill/breaker motor burnt out. This completed the job with no issues. Have not used for prolonged periods.
Used it for about 1 hour to demolish porcelain floor tile and cement backer board in a 30 sf half bathroom. Did not used the enclosed bits, instead I bought a separate Bosch sds plus tile chisel. The bit and the hammer drill did the trick. Drill had plenty of power. Good value for the price. Better than renting from Home Depot for almost as much money and having nothing to show for it! Even if I use it for 2 more hours and it breaks, it’ll be worth the investment. But it doesn’t seem to be the case! Used it for about 1 hour to demolish porcelain floor tile and cement backer board in a 30 sf half bathroom. Did not used the enclosed bits, instead I bought a separate Bosch sds plus tile chisel. The bit and the hammer drill did the trick. Drill had plenty of power. Good value for the price. Better than renting from Home Depot for almost as much money and having nothing to show for it! Even if I use it for 2 more hours and it breaks, it’ll be worth the investment. But it doesn’t seem to be the case!
I needed something strong to demo my 1950’s bathroom tile and mortar. I was swinging a sledge hammer and the tile wall would not budge. I rented one of the expensive ones from Home Depot for a day ($70 per day) and found out that this demo project was going to take a lot longer. I decided to buy this one because of the good reviews and price. I will say that I am shocked at how good this one works. It works even better than the $1500 one I rented. Feels well built and strong. It’s only been a few days, but I am happy with the purchase. Highly recommend this hammer drill. You will not be disappointed! I needed something strong to demo my 1950’s bathroom tile and mortar. I was swinging a sledge hammer and the tile wall would not budge. I rented one of the expensive ones from Home Depot for a day ($70 per day) and found out that this demo project was going to take a lot longer. I decided to buy this one because of the good reviews and price. I will say that I am shocked at how good this one works. It works even better than the $1500 one I rented. Feels well built and strong. It’s only been a few days, but I am happy with the purchase. Highly recommend this hammer drill. You will not be disappointed!
My wife and I both used it to take up tile in our bathroom that we are redoing. Worked like a champ! And so did my wife! Great value for the money (both the tool and her)! My wife and I both used it to take up tile in our bathroom that we are redoing. Worked like a champ! And so did my wife! Great value for the money (both the tool and her)!
Wow brilliant quality and performance I bought this for my son as a house warming gift but I love it so much that I have just bought a second for myself. Looks great, manages well, does the job with ease and great quality at a sensible price.
Wow brilliant quality and performance I bought this for my son as a house warming gift but I love it so much that I have just bought a second for myself. Looks great, manages well, does the job with ease and great quality at a sensible price.
Wow brilliant quality and performance I bought this for my son as a house warming gift but I love it so much that I have just bought a second for myself. Looks great, manages well, does the job with ease and great quality at a sensible price.
Does exactly what it says on the ti A good powerful machine which I have been using to drill 20mm holes into Lewisian Gneiss, a job it does without flinching.
Pretty good, use it for machine anchor bolts in spurts. A few days, sits for a long time. Has physical grease compartment and comes with grease. Has brushes and comes with spares which aren't obvious on how to order more. More vibration than Hilti but fraction of cost. Pretty good, use it for machine anchor bolts in spurts. A few days, sits for a long time. Has physical grease compartment and comes with grease. Has brushes and comes with spares which aren’t obvious on how to order more. More vibration than Hilti but fraction of cost.
Effective tile remove It took me one hour to remove two floor tiles by hand. I used the MPT and removed about 10 square meters in about an hour. Instructions easy to understand and nice hard case with essential accessories. Ideal for diy er not used the drill function yet have outside jobs to do and will update when I do the jobs. Weighs a bit but that’s expected. Value for money – yes and saved me about a day’s work so far and no grazed knuckles.
Great tool I needed to break up a Fireback in my fireplace to open up the builders opening and it made easy work of it and cleaning up all the old cement and plaster around the associated wall, flue etc. Has a strong electrical smell but I assume this is just the normal heat associated emissions related to a new electrical device. Am sure it will dissipate over time.
Great tool I needed to break up a Fireback in my fireplace to open up the builders opening and it made easy work of it and cleaning up all the old cement and plaster around the associated wall, flue etc. Has a strong electrical smell but I assume this is just the normal heat associated emissions related to a new electrical device. Am sure it will dissipate over time.
Great tool for drilling cores Used this to cut a 4inch core at an awkward height through sandstone and brick. I used ALL functions (drill, hammer and chisel) to complete the job.
This tool performed well. I’m glad that I went for the 1500W model though as I suspect that the 1050W might have struggled.
Wow what a good solid product hanging strong and easy to use love it this hammer has lots of impact power it beats the top brands Wow what a good solid product hanging strong and easy to use love it this hammer has lots of impact power it beats the top brands
Not too heavy to use. Breaking is very good. This is a great bit of kit for the money. It’s not too heavy much lighter than a similar product by Titan. The support handle is great as you can move it around to suit where and how you are using the tool. We’ve just used it to bring down a wall to put in an RSJ. It was very effective and controllable. We’ve also used it to take out a few lines of bricks again very easy and efficient. It’s great value for a DIYer. Professionals might want a more substantial tool but they can cost 4-5 times the price. I would recommend.
I bought this to drill the last 10 or 12 3/4" anchor holes in a concrete deck for my pool cover. My last drill died in that effort. What a difference! This drill with a decent SDS bit went right into the concrete. So much faster and easier than the old drill. I wish I had bought it sooner. I don't know what to expect in terms of durability yet. It comes with extra brushes. Hopefully I don't need them too soon. I bought this to drill the last 10 or 12 3/4″ anchor holes in a concrete deck for my pool cover. My last drill died in that effort. What a difference! This drill with a decent SDS bit went right into the concrete. So much faster and easier than the old drill. I wish I had bought it sooner. I don’t know what to expect in terms of durability yet. It comes with extra brushes. Hopefully I don’t need them too soon.
This is a very effective drill for boring small and large holes in brickwork, concrete blocks and concrete. This is a very effective drill for boring small and large holes in brickwork, concrete blocks and concrete.
Great for knocking out holes for electrical back boxes and chasing cables I needed to put in a load of new sockets and the bricks we have in the walls are especially tough and my ordinary corded drill struggled to get into them. This monster came with 4 bits plus a pick and chisel. After drilling a bunch of holes the chisel function made mincemeat of the briicks and I had the required hole in no time. It is big, heavy and does what is says on the tin in no time at all. Great value for money.
Good value sds drill Good value for money doesn’t quite have the power of those 3 times the price, but it gets the job done well. Very food value for money, you even get a set of chisel bits and spare brushed would buy again. You can buy exactly the same drill in aldi right now with 10 bits included and its1500 watts for 39.99. 3 year warrenty
Most importantly it was light weight easy to carry. I recently removed old tile to convert to new tile .
I’m content with this product and it was easy to use with no problems.
Very impressive! 👍 Drill holes in my walls with ease where my 240v hammer drill fails miserably. Also, the chisel works a treat! It demolished my fireplace no trouble at all.
Powerful, but basic I needed to cut a hole through a double brick wall with a 527 mm diamond saw. My normal drill, a 550 w Bosch, couldn’t cope with torque needed, overheating and slipping. I bought this to do the job, which it did, nicely! It comes in a nice tough plastic case, with about six drill bits and fittings. It is an SDS drill, so I had to get a new arbor for the diamond bit, but that was no problem (also from Amazon). The drill itself is very heavy and basic. There is no speed or torque control. It has three modes, rotary only, rotary + hammer, and hammer only. In rotary mode the literature says 800 rpm, which I can believe, not too fast but OK for masonry work and the diamond drilling. Everything about this drill is big heavy and chunky, Isambard Kingdom Brunel would have been proud of it. The cable is quite short, not a great issue. You need to be in good physical shape to hold it in place with a heavy 527 mm diamond drill and 200 mm arbor on top of a step ladder, I can tell you. It took about 15 minutes to cut a nice hole in the wall for my extractor fan, and the drill was not bothered by the loading. I did however discover that it has a safety clutch, which is not noted anywhere in the specs, and is a good safety feature as it has a mean torque when the drill catches. I haven’t tried the chisel function, so can’t comment on that, but for large diameter diamond drilling, perfect! I am giving it 5 stars, because, although lacking speed and torque control, it does what it says on the tin, and does sit well.
Great tool Cracking tool for breaking. Not used it as a drill yet. Great value for money. Only down side, the wire could be longer. Other than that it’s great.
Wish I had bought this years ago ! Have been using the drill for about a week , drilling breeze blocks and I can honestly say , I wish I had bought it years ago , it drills (8mm x 120mm) with ease , i got the 1500w version and couldn’t be happier .
For the price, you really cant beat it. The bit doesnt alight exactly right with the tool in impact mode, but that's tolerable for 1/3 the price of comparable tools. It even includes a few bits, hard case, lubes, and spare brushes (I cant imagine this tool will outlast the brushes, but nice thought) For the price, you really cant beat it. The bit doesnt alight exactly right with the tool in impact mode, but that’s tolerable for 1/3 the price of comparable tools. It even includes a few bits, hard case, lubes, and spare brushes (I cant imagine this tool will outlast the brushes, but nice thought)
Yes this is up for medium size job I bought this machine as I was taking down a wall in our house we had heavy duty pad stones to break up as well I thought this machine may not have The power to take down our wall with a lot of determination what was taken down yes it did the job ,I could of had something A lot bigger.
Plenty of power. Made short work of cinderblock with a 7/8 bit. I haven't had it long enough to speak to durability, but so far, so good. A great value for occasional use. Plenty of power. Made short work of cinderblock with a 7/8 bit. I haven’t had it long enough to speak to durability, but so far, so good. A great value for occasional use.
Durable hammer that worked well to take up a kitchen floo Durable hammer that comes with a nice array of chisels and bits. Worked well to pull up a living room and kitchen floor consisting of 2cm heavily mortared tile and will be using to pull up the floor in the rest of the house. This is a brush-type motor and unfortunately one of the two original brushes wore down very quickly, but after replacing the brushes with a set that came with the hammer drill, I was back in action. Contacted the seller and the company was nice enough to send a couple free sets. The next set seems to be wearing evenly, so probably just a one off issue.
Great piece of ki This drill makes light work of drilling through hard materials such as brick.
I bought this drill when my old hammer drill kept on failing when I needed to put up some heavy duty hooks into masonary.
The drill is nicely boxed and comes with some well engineered bits.
On the down size is the weight but this has to be off set against the price and the fact that it has a chisel feature which other similarly priced hammer drills do not.
Well made, solid and daoes the job. Excellent product for the money. It’s not especially lightweight, but then if it was, it wouldn’t do the job. As it is, the machine seems solid and well made, it’s easy to use, and powerful enough to do what you’d expect of it. I used it to drill holes in house wall made of granite composite very hard bricks, overlain with painted pebbledash render, and it did this easily and efficiently. It didn’t (as I feared) cause the render to crack or flake off, and it went through the very hard bricks effortlessly. Good set of bits, and in a handy wellmade case for storage. I’m happy with this, it’s great value for money.
Does exactly what it says it will! Great buy This is a great drill.
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
Does exactly what it says it will! Great buy This is a great drill.
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
Does exactly what it says it will! Great buy This is a great drill.
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
Used to cut a 100 mm hole in concrete block Used in conjunction with a Starrett BMC 102 100 mm diamond core bit and Draper arbour and guide as suggested by Amazon. I needed to cut a 4 inch hole for extractor fan in concrete block under plasterboard. Online wisdom suggested I would be better hiring a more powerful core drill but a days hire was about the same as buying this. So I took the plunge and it worked well. It skidded around on the surface a bit but once it bit into the block I was through in less than a minute. It didn’t grab once but there is a risk of injury as there is no clutch / sensor. The drill did not struggle at all…. and I get to keep it!
I haven’t used it for anything else but it comes with a few big beefy bits and chisels and the jack hammer function is a great bonus. So far I’m impressed.
Used to cut a 100 mm hole in concrete block Used in conjunction with a Starrett BMC 102 100 mm diamond core bit and Draper arbour and guide as suggested by Amazon. I needed to cut a 4 inch hole for extractor fan in concrete block under plasterboard. Online wisdom suggested I would be better hiring a more powerful core drill but a days hire was about the same as buying this. So I took the plunge and it worked well. It skidded around on the surface a bit but once it bit into the block I was through in less than a minute. It didn’t grab once but there is a risk of injury as there is no clutch / sensor. The drill did not struggle at all…. and I get to keep it!
I haven’t used it for anything else but it comes with a few big beefy bits and chisels and the jack hammer function is a great bonus. So far I’m impressed.
Powerful SDS hammer drill This is a great SDS hammer drill.
Very powerful and sturdy looking. It just smashes through stuff. Appreciate the sturdy handle and clutch feature which helps to avoid getting hit when the drill bit gets stuck resulting in a sudden whiplash effect.
The drill comes with a few standard accessories in a hard case which keeps it all together.
Very good value, price for power. I wouldnt say it’s lightweight but that what adds to its force and getting though materials quickly.
Does the job Is quite powerful for the price used iit for cutting out brickwork and block work quite light and easy to use good selection of chisels seems well made and strong
it did the job I bought it for, removal of ceramic floor tile, it worked very well but did get heavy after 1 hou it did the job I bought it for, removal of ceramic floor tile, it worked very well but did get heavy after 1 hou
Drilled about 8 holes, 6" deep with the supplied bit. Worked flawlessly. Cant beat it for the price. Time will tell if it will last. But seems like it's pretty well built. Accessories are a nice touch. Blow.molded case is a plus too. Would buy agai Drilled about 8 holes, 6″ deep with the supplied bit. Worked flawlessly. Cant beat it for the price. Time will tell if it will last. But seems like it’s pretty well built. Accessories are a nice touch. Blow.molded case is a plus too. Would buy agai
Good tool must have Life and back saver took the hard work out of digging 20 holes filled with all kinds of rock brick blox you name it this thing smashed it up
Good tool must have Life and back saver took the hard work out of digging 20 holes filled with all kinds of rock brick blox you name it this thing smashed it up
Broke up concrete and drilled holes I needed with ease. Worth the money, wasted money in the past renting brand name hammer drills. Broke up concrete and drilled holes I needed with ease. Worth the money, wasted money in the past renting brand name hammer drills.
Can't say what durability is . Just haven't used it that much but the quality seems ok for the price. Can’t say what durability is . Just haven’t used it that much but the quality seems ok for the price.
Bought to bust up old tile and mortar in my home. Tool did what it was supposed to and seems to be well built. Can compete with the big power tool brands and is less expensive. Highly recommend! Bought to bust up old tile and mortar in my home. Tool did what it was supposed to and seems to be well built. Can compete with the big power tool brands and is less expensive. Highly recommend!
Excelle
Had a load of render to hack off, was going to hire a demolition hammer for 25 a day. Saw this thought I give it a try, went through it, like a knife through butter. Great bit of kit, cheaper than highering.
Value for money with reliability
For the money you can’t go wrong. I was going to hire one but was 60 so bought this instead and did a cracking job of digging out some steps and concrete base. Excelle
Worth every penny
Purchased to chisel through an old fence foundation (about 40cm x 30cm x 2m) made of concrete to make a small hole for planting and wasn’t sure how well this would work. I was pleasantly surprised.
Don’t get me wrong the bigger heavy duty breakers would have done the job quicker but would have cost 100 more and less versatile. This however cuts through concrete with relative ease and after about 2 hours I had my hole.
Very sturdy piece of kit and the chisels still don’t even look used. I bought this in a lightning deal at 49.99 so it was a massive bargain and hugely impressed with the quality.
Pleasantly surprised
Good value for money. I had a couple of jobs lined up for this and it was almost as cheap as hiring one. Needed to break up and remove an old concrete base for a rotary washing line and it made easy work of it. Probably not good enough for professional use but def good for diy. Recommend
Fantastic tool
Drilling holes is a breeze, plenty of power. Powerful demolition hammer too. Very pleased
Sturdy and packs a punch
This is a great SDS Drill. Incredibly tough and does exactly what it says on the tin. Helped me pile through concrete fence post bases in no time. Bayonet filling to the chisel set.
breaker drill
I bought this to break a wall from top to bottom which meant breaking breeze blocks in half. It chopped off the piece I needed gone in half an hour or so. Definitely paid for itself and I still have a very capable drill and breaker. Well worth the money.
Great bit of kit.
I purchased this kit to put a garage defender lock in. Done the job in 15minutes.
Extremely powerful, good accessories.
Would say the instructions could be slightly better but excellent for the money.
Great sds
This is great for chasing walls. Easy to use not heavey at all
Cement breake
Multi function, good value but a tad heavy for the average worker. Proof of the pudding is in the eating.
quite heavy but packs a good punch
I read another review where the hammer action was very weak.
I found this as well but I figured I’d check the oil level. When I opened the filler cap the reservoir was packed with grease. The instructions say to use engine oil, so i scraped the grease out and filled it with oil.
Works like a charm now. really strong hammer action. I would recommend this fix to anyone.
Perfect for what I needed it fo
Spent over an hour with a hammer and chisel to try and remove paving slab dabs of cement so I could re-lay the slab. This machine broke up the cement in minutes. Was like a knife through butter. Let the machine do the work.
Great value for money. Did the job perfectly.
This was a great product for the removal of excess concrete we found while remodelling our patio. We managed to complete the job in a speedy and effective way.
Hammer drill
Easy to use, light weight, excellent product, well worth the money, arrived next day, brillia
Good value for money
Good value for money and does the job very well
Well worth the price
I bought this SDS drill after reading reviews. It’s not so heavy to use as reviews mentioned. I’m not a big strong bloke but I’ve used it one handed to break concrete post mix. This drill comes in a good case with a point chisel and a spade chisel. 3 useful sized drills too.
I bought it because I’m doing up my rear garden and concrete post mix has popped their heads which a hammer and chisel had no effect. This MPT didn’t break the concrete like a hot knife through butter but it did break 18″ thick concrete quite admirably. Well worth the price. Its a drill I’m glad I bought.
Good value for money
Bought this for the chisel mechanism to break up some concrete foundation beneath a garden ramp I removed. Really easy to use and made easy work of breaking up the concrete into more manageable chunks.
The drill has a fair weight to it, but this is to be expected for the nature of the jobs it is intended for.
Incredibly good value for money, especially if you only plan to use for the odd one off job. It was certainly cheaper for me buying this and carrying out my own work than accepting quotes around 1000 to get the job done.
The best on the market for the price!
This drill is top ranking, I’m the original Jeremy Clarkson when it comes to building work but this drill made everything so easy, easy to set up and use, went through concrete with ease.
A little bit heavy.
Great bit of kit, wanted it for drilling 10 25mm holes for anchor resin, a piece of cake.
Pro Standard, good value.
I’ve just received one of these. I probably didn’t need this beast! I chose this one because every review I read of other drills said they were too weak to get through brick & stone. My ancient 1970’s Black & Decker could make no impression in our garage wall, so I had to replace it. I barely even switched this thing on and it was straight through. Incredible. This is very powerful indeed. If you want something to chisel channels into the walls for wiring for example, this machine is your buddy. Fantastic, buy with confidence.
Pro Standard, good value.
I’ve just received one of these. I probably didn’t need this beast! I chose this one because every review I read of other drills said they were too weak to get through brick & stone. My ancient 1970’s Black & Decker could make no impression in our garage wall, so I had to replace it. I barely even switched this thing on and it was straight through. Incredible. This is very powerful indeed. If you want something to chisel channels into the walls for wiring for example, this machine is your buddy. Fantastic, buy with confidence.
Worked on building sites for several years using kango hammers to break through walls. This is as powerful easily! Completed the access hole above in less than 20 minutes. It isn’t light but if it was it wouldn’t have the power it does. Goes through bricks and mortar in seconds. Tip, have both point and chisel to hand because it drives in so quickly you can sometimes get the bit stuck. Release it from the chuck (very simple) and put the spare bit in and break the brickwork to get the other one out.
Love this breaker.
User operating instructions need updating, as they are incorrect and unclear.
At my second attempt, I drilled into a concrete lintel with the hammer action in less than a minute. But, I had to go online to follow the instructions for a very similar drill. It appears this drill may be an example of “reverse engineering”. I will be contacting the manufacturer about the user guide. Otherwise, I am now happy with my purchase.
User operating instructions need updating, as they are incorrect and unclear.
At my second attempt, I drilled into a concrete lintel with the hammer action in less than a minute. But, I had to go online to follow the instructions for a very similar drill. It appears this drill may be an example of “reverse engineering”. I will be contacting the manufacturer about the user guide. Otherwise, I am now happy with my purchase.
VFM
For years I struggled with my old drill until I took the plunge and replaced it wow this is a fantastic drill with loads of power.
Value for money
Great value drill for the money, used a couple of times with no issues as in some feedback reviews.
Value for money
Good sturdy drill at decent price time will tell how much abuse this can take but its holding up well so fa
Great value !!
Heavy duty SDS masonry drill with chisel action. Having never used one before or even seen one being used I took a chance as I had really bad pointing and stonework to sort out. The drill is nicely boxed and comes with two chisels and three drill bits. also a depth guide, spare brushes and grease. The chisel action is amazing and has completed the work in next to no time. Well worth the money and would highly recommend.
Great value
Great drill at good value for money. Used for breaking concrete slab and brick wall.
Very good
For the money really happy and does exactly what I want it fo
Brilliant!
Brilliant drill, I work for a agricultural installation company so it gets a work out on farms. I am very impressed at how quick it drills 14mm all day without complaint or getting too hot! It even out performs the bosses Bosch professional drill! Would recommend to anyone, from DIY users to industrial users.
Superb tool - and excellent value for money
Bought this to break up concrete at bottom of fence posts – and this tool makes short work of that task.
In fact you need to watch out for the strenght of the hammer function when using the chisels – very easy to hammer too deep into the concrete and end up getting the chisel stuck.
And the SDS/Slotted Drive System makes switch of chisels / drills is so easy – just pull back the chuck and change drill bit 😉
A perfect addition to anyones DIY tool collection.
Only very very small negative point i found when using was that the mode switch initially was very stiff/hard to move
but after a couple of turns it loosens up.
Has good sides and one major bad side
I bought this to take down a garage, which it did pretty well.
However, the dust from the bricks got into the fitment and now I cannot remove the chisel bit. We’ve tried all sorts a it stuck fast. So if you go with this model, I’d suggest stopping every now and then to clean out the fitting to ensure the bits are easily removed.
brilliant bit of ki
Dug out 3 posts this bit of kit done it no problem definitely would recommend
Works extremely well for small jobs
Used to break up a concrete path to put in posts.. great tool for light concrete. Did the job nicely. Not suitable for heavy stuff. But for a small hammer it works extremely well
Great bit of kit!
Needed to break out old fence posts and concrete to install new fence posts. Originally looked at hiring one, then saw this on Amazon! For 90 quid, I thought “worth a punt”! Glad I bought it, done the job effortlessly! Also with chisels and drill bits, nice addition to my tool collection.
Drill
It was brought for my husband he is over the moon with this produc
For then price this is a fantastic product. Extremely powerful and has a real weight behind it which helps when drilling through walls.
Comes with a range of drill bits and fits standard SDS bits.
I can’t comment on the robustness of the drill as I’ve only used it a couple of times but seems pretty sturdy.
Suitable Replaceme
Bought to break out concrete around fence post after previous ‘other manufacturer’ drill/breaker motor burnt out. This completed the job with no issues. Have not used for prolonged periods.
Used it for about 1 hour to demolish porcelain floor tile and cement backer board in a 30 sf half bathroom. Did not used the enclosed bits, instead I bought a separate Bosch sds plus tile chisel. The bit and the hammer drill did the trick. Drill had plenty of power. Good value for the price. Better than renting from Home Depot for almost as much money and having nothing to show for it! Even if I use it for 2 more hours and it breaks, it’ll be worth the investment. But it doesn’t seem to be the case!
Used it for about 1 hour to demolish porcelain floor tile and cement backer board in a 30 sf half bathroom. Did not used the enclosed bits, instead I bought a separate Bosch sds plus tile chisel. The bit and the hammer drill did the trick. Drill had plenty of power. Good value for the price. Better than renting from Home Depot for almost as much money and having nothing to show for it! Even if I use it for 2 more hours and it breaks, it’ll be worth the investment. But it doesn’t seem to be the case!
Works like a charm! Not too heavy and chip concrete really good.
Works like a charm! Not too heavy and chip concrete really good.
I needed something strong to demo my 1950’s bathroom tile and mortar. I was swinging a sledge hammer and the tile wall would not budge. I rented one of the expensive ones from Home Depot for a day ($70 per day) and found out that this demo project was going to take a lot longer. I decided to buy this one because of the good reviews and price. I will say that I am shocked at how good this one works. It works even better than the $1500 one I rented. Feels well built and strong. It’s only been a few days, but I am happy with the purchase. Highly recommend this hammer drill. You will not be disappointed!
I needed something strong to demo my 1950’s bathroom tile and mortar. I was swinging a sledge hammer and the tile wall would not budge. I rented one of the expensive ones from Home Depot for a day ($70 per day) and found out that this demo project was going to take a lot longer. I decided to buy this one because of the good reviews and price. I will say that I am shocked at how good this one works. It works even better than the $1500 one I rented. Feels well built and strong. It’s only been a few days, but I am happy with the purchase. Highly recommend this hammer drill. You will not be disappointed!
Power drill
This is a good drill for the price. It’s powerful and robust. I am impressed
My wife and I both used it to take up tile in our bathroom that we are redoing. Worked like a champ! And so did my wife! Great value for the money (both the tool and her)!
My wife and I both used it to take up tile in our bathroom that we are redoing. Worked like a champ! And so did my wife! Great value for the money (both the tool and her)!
I bought this for my son as a house warming gift but I love it so much that I have just bought a second for myself. Looks great, manages well, does the job with ease and great quality at a sensible price.
I bought this for my son as a house warming gift but I love it so much that I have just bought a second for myself. Looks great, manages well, does the job with ease and great quality at a sensible price.
I bought this for my son as a house warming gift but I love it so much that I have just bought a second for myself. Looks great, manages well, does the job with ease and great quality at a sensible price.
didn’t mess around got stuck in and it worked grea
Does exactly what it says on the ti
A good powerful machine which I have been using to drill 20mm holes into Lewisian Gneiss, a job it does without flinching.
Pretty good, use it for machine anchor bolts in spurts. A few days, sits for a long time. Has physical grease compartment and comes with grease. Has brushes and comes with spares which aren't obvious on how to order more. More vibration than Hilti but fraction of cost.
Pretty good, use it for machine anchor bolts in spurts. A few days, sits for a long time. Has physical grease compartment and comes with grease. Has brushes and comes with spares which aren’t obvious on how to order more. More vibration than Hilti but fraction of cost.
Top notch heavy duty drill at great price
For the price for a heavy duty drill this is amazing
It took me one hour to remove two floor tiles by hand. I used the MPT and removed about 10 square meters in about an hour. Instructions easy to understand and nice hard case with essential accessories. Ideal for diy er not used the drill function yet have outside jobs to do and will update when I do the jobs. Weighs a bit but that’s expected. Value for money – yes and saved me about a day’s work so far and no grazed knuckles.
Great tool
I needed to break up a Fireback in my fireplace to open up the builders opening and it made easy work of it and cleaning up all the old cement and plaster around the associated wall, flue etc. Has a strong electrical smell but I assume this is just the normal heat associated emissions related to a new electrical device. Am sure it will dissipate over time.
Great tool
I needed to break up a Fireback in my fireplace to open up the builders opening and it made easy work of it and cleaning up all the old cement and plaster around the associated wall, flue etc. Has a strong electrical smell but I assume this is just the normal heat associated emissions related to a new electrical device. Am sure it will dissipate over time.
Value for money
Good and heavy worked really well best value for money
Great tool for drilling cores
Used this to cut a 4inch core at an awkward height through sandstone and brick. I used ALL functions (drill, hammer and chisel) to complete the job.
This tool performed well. I’m glad that I went for the 1500W model though as I suspect that the 1050W might have struggled.
Wow what a good solid product hanging strong and easy to use love it this hammer has lots of impact power it beats the top brands
Wow what a good solid product hanging strong and easy to use love it this hammer has lots of impact power it beats the top brands
This is a great bit of kit for the money. It’s not too heavy much lighter than a similar product by Titan. The support handle is great as you can move it around to suit where and how you are using the tool. We’ve just used it to bring down a wall to put in an RSJ. It was very effective and controllable. We’ve also used it to take out a few lines of bricks again very easy and efficient. It’s great value for a DIYer. Professionals might want a more substantial tool but they can cost 4-5 times the price. I would recommend.
I bought this to drill the last 10 or 12 3/4" anchor holes in a concrete deck for my pool cover. My last drill died in that effort. What a difference! This drill with a decent SDS bit went right into the concrete. So much faster and easier than the old drill. I wish I had bought it sooner. I don't know what to expect in terms of durability yet. It comes with extra brushes. Hopefully I don't need them too soon.
I bought this to drill the last 10 or 12 3/4″ anchor holes in a concrete deck for my pool cover. My last drill died in that effort. What a difference! This drill with a decent SDS bit went right into the concrete. So much faster and easier than the old drill. I wish I had bought it sooner. I don’t know what to expect in terms of durability yet. It comes with extra brushes. Hopefully I don’t need them too soon.
This is a very effective drill for boring small and large holes in brickwork, concrete blocks and concrete.
This is a very effective drill for boring small and large holes in brickwork, concrete blocks and concrete.
Great for knocking out holes for electrical back boxes and chasing cables
I needed to put in a load of new sockets and the bricks we have in the walls are especially tough and my ordinary corded drill struggled to get into them. This monster came with 4 bits plus a pick and chisel. After drilling a bunch of holes the chisel function made mincemeat of the briicks and I had the required hole in no time. It is big, heavy and does what is says on the tin in no time at all. Great value for money.
It was used with The hole cutter to make a hole in a 5" concrete wall.
It was used with The hole cutter to make a hole in a 5″ concrete wall.
Good value sds drill
Good value for money doesn’t quite have the power of those 3 times the price, but it gets the job done well. Very food value for money, you even get a set of chisel bits and spare brushed would buy again. You can buy exactly the same drill in aldi right now with 10 bits included and its1500 watts for 39.99. 3 year warrenty
Good value
Used half a dozen times now, not a bad bit of kit for the money.
Good value
Used half a dozen times now, not a bad bit of kit for the money.
Most importantly it was light weight easy to carry.
I recently removed old tile to convert to new tile .
I’m content with this product and it was easy to use with no problems.
Works well
Excellent product, took up concreted floor tiles easily and made a difficult job easy!
Very impressive! 👍
Drill holes in my walls with ease where my 240v hammer drill fails miserably. Also, the chisel works a treat! It demolished my fireplace no trouble at all.
I needed to cut a hole through a double brick wall with a 527 mm diamond saw. My normal drill, a 550 w Bosch, couldn’t cope with torque needed, overheating and slipping. I bought this to do the job, which it did, nicely! It comes in a nice tough plastic case, with about six drill bits and fittings. It is an SDS drill, so I had to get a new arbor for the diamond bit, but that was no problem (also from Amazon). The drill itself is very heavy and basic. There is no speed or torque control. It has three modes, rotary only, rotary + hammer, and hammer only. In rotary mode the literature says 800 rpm, which I can believe, not too fast but OK for masonry work and the diamond drilling. Everything about this drill is big heavy and chunky, Isambard Kingdom Brunel would have been proud of it. The cable is quite short, not a great issue. You need to be in good physical shape to hold it in place with a heavy 527 mm diamond drill and 200 mm arbor on top of a step ladder, I can tell you. It took about 15 minutes to cut a nice hole in the wall for my extractor fan, and the drill was not bothered by the loading. I did however discover that it has a safety clutch, which is not noted anywhere in the specs, and is a good safety feature as it has a mean torque when the drill catches. I haven’t tried the chisel function, so can’t comment on that, but for large diameter diamond drilling, perfect! I am giving it 5 stars, because, although lacking speed and torque control, it does what it says on the tin, and does sit well.
Great tool to have.
Fab tool for the price. Has proved invaluable with my house renovation.
Great tool
Cracking tool for breaking. Not used it as a drill yet. Great value for money. Only down side, the wire could be longer. Other than that it’s great.
Wish I had bought this years ago !
Have been using the drill for about a week , drilling breeze blocks and I can honestly say , I wish I had bought it years ago , it drills (8mm x 120mm) with ease , i got the 1500w version and couldn’t be happier .
Perfec
Product does everything described, also drill and chisel sets supplied are good quality too, for the money it’s worth it every day.
For the price, you really cant beat it. The bit doesnt alight exactly right with the tool in impact mode, but that's tolerable for 1/3 the price of comparable tools. It even includes a few bits, hard case, lubes, and spare brushes (I cant imagine this tool will outlast the brushes, but nice thought)
For the price, you really cant beat it. The bit doesnt alight exactly right with the tool in impact mode, but that’s tolerable for 1/3 the price of comparable tools. It even includes a few bits, hard case, lubes, and spare brushes (I cant imagine this tool will outlast the brushes, but nice thought)
Yes this is up for medium size job
I bought this machine as I was taking down a wall in our house we had heavy duty pad stones to break up as well I thought this machine may not have The power to take down our wall with a lot of determination what was taken down yes it did the job ,I could of had something A lot bigger.
Plenty of power. Made short work of cinderblock with a 7/8 bit. I haven't had it long enough to speak to durability, but so far, so good. A great value for occasional use.
Plenty of power. Made short work of cinderblock with a 7/8 bit. I haven’t had it long enough to speak to durability, but so far, so good. A great value for occasional use.
Durable hammer that worked well to take up a kitchen floo
Durable hammer that comes with a nice array of chisels and bits. Worked well to pull up a living room and kitchen floor consisting of 2cm heavily mortared tile and will be using to pull up the floor in the rest of the house. This is a brush-type motor and unfortunately one of the two original brushes wore down very quickly, but after replacing the brushes with a set that came with the hammer drill, I was back in action. Contacted the seller and the company was nice enough to send a couple free sets. The next set seems to be wearing evenly, so probably just a one off issue.
Great piece of ki
This drill makes light work of drilling through hard materials such as brick.
I bought this drill when my old hammer drill kept on failing when I needed to put up some heavy duty hooks into masonary.
The drill is nicely boxed and comes with some well engineered bits.
On the down size is the weight but this has to be off set against the price and the fact that it has a chisel feature which other similarly priced hammer drills do not.
Excellent product for the money. It’s not especially lightweight, but then if it was, it wouldn’t do the job. As it is, the machine seems solid and well made, it’s easy to use, and powerful enough to do what you’d expect of it. I used it to drill holes in house wall made of granite composite very hard bricks, overlain with painted pebbledash render, and it did this easily and efficiently. It didn’t (as I feared) cause the render to crack or flake off, and it went through the very hard bricks effortlessly. Good set of bits, and in a handy wellmade case for storage. I’m happy with this, it’s great value for money.
This is a great drill.
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
This is a great drill.
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
This is a great drill.
Renovating a house and had no idea what to buy, only used it today and we were very impressed, it did everything asked of it!
The instruction booklet however is shockingly bad, its all mixed up, undoubtedly not written by a british person, all jumbled.
Dont let this put you off buying though
Used in conjunction with a Starrett BMC 102 100 mm diamond core bit and Draper arbour and guide as suggested by Amazon. I needed to cut a 4 inch hole for extractor fan in concrete block under plasterboard. Online wisdom suggested I would be better hiring a more powerful core drill but a days hire was about the same as buying this. So I took the plunge and it worked well. It skidded around on the surface a bit but once it bit into the block I was through in less than a minute. It didn’t grab once but there is a risk of injury as there is no clutch / sensor. The drill did not struggle at all…. and I get to keep it!
I haven’t used it for anything else but it comes with a few big beefy bits and chisels and the jack hammer function is a great bonus. So far I’m impressed.
Used in conjunction with a Starrett BMC 102 100 mm diamond core bit and Draper arbour and guide as suggested by Amazon. I needed to cut a 4 inch hole for extractor fan in concrete block under plasterboard. Online wisdom suggested I would be better hiring a more powerful core drill but a days hire was about the same as buying this. So I took the plunge and it worked well. It skidded around on the surface a bit but once it bit into the block I was through in less than a minute. It didn’t grab once but there is a risk of injury as there is no clutch / sensor. The drill did not struggle at all…. and I get to keep it!
I haven’t used it for anything else but it comes with a few big beefy bits and chisels and the jack hammer function is a great bonus. So far I’m impressed.
Powerful SDS hammer drill
This is a great SDS hammer drill.
Very powerful and sturdy looking. It just smashes through stuff. Appreciate the sturdy handle and clutch feature which helps to avoid getting hit when the drill bit gets stuck resulting in a sudden whiplash effect.
The drill comes with a few standard accessories in a hard case which keeps it all together.
Very good value, price for power. I wouldnt say it’s lightweight but that what adds to its force and getting though materials quickly.
Great buy
Item worked exactly as advised and great quality for the price. Well worth the money
Does the job
Is quite powerful for the price used iit for cutting out brickwork and block work quite light and easy to use good selection of chisels seems well made and strong
Neat & Functional SDS Drill
A great SDS Drill, easy to use, not too heavy, robust and does the job.
Would recommend as really good value.
it did the job I bought it for, removal of ceramic floor tile, it worked very well but did get heavy after 1 hou
it did the job I bought it for, removal of ceramic floor tile, it worked very well but did get heavy after 1 hou
For a cheap tool I would put it on the level of big brand tools
For a cheap tool I would put it on the level of big brand tools
Drilled about 8 holes, 6" deep with the supplied bit. Worked flawlessly. Cant beat it for the price. Time will tell if it will last. But seems like it's pretty well built. Accessories are a nice touch. Blow.molded case is a plus too. Would buy agai
Drilled about 8 holes, 6″ deep with the supplied bit. Worked flawlessly. Cant beat it for the price. Time will tell if it will last. But seems like it’s pretty well built. Accessories are a nice touch. Blow.molded case is a plus too. Would buy agai
Life and back saver took the hard work out of digging 20 holes filled with all kinds of rock brick blox you name it this thing smashed it up
Life and back saver took the hard work out of digging 20 holes filled with all kinds of rock brick blox you name it this thing smashed it up
Broke up concrete and drilled holes I needed with ease. Worth the money, wasted money in the past renting brand name hammer drills.
Broke up concrete and drilled holes I needed with ease. Worth the money, wasted money in the past renting brand name hammer drills.
Can't say what durability is . Just haven't used it that much but the quality seems ok for the price.
Can’t say what durability is . Just haven’t used it that much but the quality seems ok for the price.
Bought to bust up old tile and mortar in my home. Tool did what it was supposed to and seems to be well built. Can compete with the big power tool brands and is less expensive. Highly recommend!
Bought to bust up old tile and mortar in my home. Tool did what it was supposed to and seems to be well built. Can compete with the big power tool brands and is less expensive. Highly recommend!