YuanLey 26 Port PoE Switch, 24 PoE+ Port 100Mbps, 2 Uplink Gigabit, 802.3af/at 400W High Power, Rackmount Unmanaged Plug and Play
 |  |  |  |  | |
|---|---|---|---|---|---|
| PoE Port | 4×10/100/1000Mbps | 8×10/100/1000Mbps | 8×10/100/1000Mbps | 16×10/100/1000Mbps | 24×10/100/1000Mbps |
| UpLink Port | 1×10/100/1000Mbps | 2×10/100/1000Mbps | 2×10/100/1000Mbps | 2×10/100/1000Mbps | |
| POE Power Output | 78W | 120W | 120W | 250W | 400W |
| Switch Capacity | 12Gbps | 12Gbps | 12Gbps | 12Gbps | 56Gbps |
| Dimensions (L x W x H) | 7.9 x 4.7 x 1.7 | 7.9 x 4.7 x 1.7 | 7.9 x 4.7 x 1.7 | 10.6 x 7.1 x 1.7 | 17.3x 8.3 x 1.7 |
| Weight (lbs) | 2.15 | 2.31 | 2.31 | 3.31 | 5.4 |
| Extend Function | ✓ | ✓ | ✓ | ✓ | |
| VLAN | ✓ | N/A | ✓ | ✓ | ✓ |
| Fan Design | Fanless | Fanless | Fanless | Industrial Cooling Fan | Industrial Cooling Fan |
| Case Material | Metal | Metal | Metal | Metal | Metal |
 |  |  |  | |
|---|---|---|---|---|
| PoE Port | 5×10/100Mbps | 8×10/100Mbps | 16×10/100Mbps | 24×10/100Mbps |
| UpLink Port | 2×10/100Mbps | 2×10/100/1000Mbps | 2×10/100/1000Mbps | 2×10/100/1000Mbps |
| POE Power Output | 78W | 120W | 250W | 400W |
| Switch Capacity | 1.4Gbps | 10Gbps | 12Gbps | 12Gbps |
| Dimensions (L x W x H) | 7.9 x 4.7 x 1.7 | 7.9 x 4.7 x 1.7 | 10.6 x 7.1 x 1.7 | 10.6 x 7.1 x 1.7 |
| Weight (lbs) | 2.15 | 2.31 | 3.31 | 4.62 |
| Extend Function | ✓ | ✓ | ✓ | ✓ |
| VLAN | ✓ | ✓ | ✓ | ✓ |
| Fan Design | Fanless | Fanless | Industrial Cooling Fan | Industrial Cooling Fan |
| Case Material | Metal | Metal | Metal | Metal |
| Weight: | 2.04 kg |
| Dimensions: | 27 x 18 x 4.4 cm; 2.04 Kilograms |
| Brand: | YuanLey |
| Model: | YS20242F-P |
| Batteries Included: | No |
| Manufacture: | YuanLey |
Enchufar y funciona
Dos meses despus y funciona perfectamente, conectadas tres cmaras IP 24 horas y va a muy bie
Super simple to set up and unmanaged for beginners like me. The fan is a bit loud, but doesn't bother me as it is in a room i seldom enter. Highly recommend to get broadband throughout the house.
Super simple to set up and unmanaged for beginners like me. The fan is a bit loud, but doesn’t bother me as it is in a room i seldom enter. Highly recommend to get broadband throughout the house.
YuanLey 18 Porte Gigabit Poe Switch
Questo switch fa molto bene il suo lavoro, la scocca in metallo lo rende ancora pi di qualit. Anche se la marca poco conosciuta il prodotto risultato essere molto affidabile, lo consiglio!
La spedizione da parte di Amazon sempre eccellente, il giorno dopo l’ordine avevo il prodotto a casa!
Erwartungen erfüll
Der Switch tut das, was er soll: Versorgt zuverlssig meine Unify Accesspoints mit POE, passt mit den mitgelieferten Haltern in mein 19″ Rack und luft stabil und schnell.
Der Switch ist NICHT flsterleise, was in meinem Fall (Rack im Hauswirtschaftsraum) nicht weiter schlimm ist, aber fr den Einsatz auf einem Schreibtisch knnte es evtl. strend sein kann.
Ich bin zufrieden und wrde ihn wieder kaufen.
Alte prestazioni
installato in tempo zero , molto performante e ottimo rapporto qualit prezzo.
Per utilizzo casalingo di livello professionale
plug&play, même pour vlan isolatio
Malgr les autres commentaires y compris une rponse ma question avant l’achat, le 8PoE(G)+2G+1SFP est livr avec les fixations rack 10″ (voir photo) donc c’est peut tre nouveau dsormais…
J’ai dj 2 switch PoE 8 ports (au dessus et dessous celui-ci dans ma photo) pour 16 circuits qui arrive dans les panneaux de brasage (les blancs en photo), mais je voulais celui-ci pour sa fonctionne VLAN pour isoler les IoT du rseau principale et a marche trs bien (mode extended).
N.B. mes 2 autres switch ont t branch sur le uplink du box (4 portes) comme celui-ci qui a rendu tous les autres circuits “ouverts” aux 8 isols par mode extended. Pour rsoudre ceci, j’ai du brancher un de mes switch Digitus dans l’autre Digitus (eg Port 8 dans Port 8 dans ma photo #2), puis port 1 de n’importe Digitus branch dans porte 1 du YuanLey (mais ceci peut tre n’importe n’importe). Comme a, tous ce qui est branch aux deux Digitus sont dans leur LAN ensemble et visible chacun (mon rseau “Maison”). Tout le reste est isol avec tous ie IoT (cameras etc) et rseau “appartement” (AirBnB) sont tous spars entre eux et avec le rseau principale.
C’est un peu compliqu, mais c’est exactement ce que je cherchais pour avoir un rseau “maison” avec des rseaux “le reste” qui sont isol compltement entre eux et avec le rseau principale
Plug and go
Excellent network switch.
Pros:
-Totally silent, no fan that keeps going
-small
-plug and go-
Cons: only a few ports, but that is what are buying.
I have a PoE cctv camera and a NAD and a few other bits and pieces hanging off this. When you switch it on and connect the Ethernet cables it connects straightaway and I can see the camera image and recordings via the NAS and there is no interference with the rest of the home network. Excellent product.
Plug and go
Excellent network switch.
Pros:
-Totally silent, no fan that keeps going
-small
-plug and go-
Cons: only a few ports, but that is what are buying.
I have a PoE cctv camera and a NAD and a few other bits and pieces hanging off this. When you switch it on and connect the Ethernet cables it connects straightaway and I can see the camera image and recordings via the NAS and there is no interference with the rest of the home network. Excellent product.
works well. cheaper than other bigger brand
his is my second POE switch from this brand as needing a bigger one for network expansion . works very well
Outstanding hub for running POE cameras
Bought this to run 5x external & 3x internal Hikvision POE cameras, including two with floodlights and one PTZ. We also have two Ubiquity Access Points on the first & second floors.
I wanted the switch up on the third floor, but the NVR in my study on the ground floor.
Install was a breeze; literally plug’n’play, and the fanless unit sits silently, doing it’s thing.
We ran Cat6 throughout the property when we renovated, connecting each room to a central cabinet in my study, plus shielded/weatherproof Cat6 to the locations we wanted external cameras. Our longest run between Camera & Switch is approximately 85m and from Switch back to Router/NVR is roughly 70m – there’s been absolutely zero degradation in signal quality and all 9 cameras run at full resolution, the floodlight cameras light up exactly as they should and other than a minimal lag to access the PTZ camera, plus one or two Access Point reboots (which I put down to Virgin, rather than any fault in the POE switch), we’ve had very little to worry about.
More than happy to recommend.
Outstanding hub for running POE cameras
Bought this to run 5x external & 3x internal Hikvision POE cameras, including two with floodlights and one PTZ. We also have two Ubiquity Access Points on the first & second floors.
I wanted the switch up on the third floor, but the NVR in my study on the ground floor.
Install was a breeze; literally plug’n’play, and the fanless unit sits silently, doing it’s thing.
We ran Cat6 throughout the property when we renovated, connecting each room to a central cabinet in my study, plus shielded/weatherproof Cat6 to the locations we wanted external cameras. Our longest run between Camera & Switch is approximately 85m and from Switch back to Router/NVR is roughly 70m – there’s been absolutely zero degradation in signal quality and all 9 cameras run at full resolution, the floodlight cameras light up exactly as they should and other than a minimal lag to access the PTZ camera, plus one or two Access Point reboots (which I put down to Virgin, rather than any fault in the POE switch), we’ve had very little to worry about.
More than happy to recommend.
Muss nicht teuer sei
Versorgt meine Kameras in auch ca. 70 m Entfernung bis jetzt zuverlssig mit Strom.
Das war bis jetzt immer ein Problem. Ich wollte auch nicht hunderte Euro ausgeben. Ja er tut ganz leise ich sage mal fietschen aber das Rattern der Festplatten im NVR ist lauter.
Zum Stromverbrauch kann ich nichts sagen .
Zur Haltbarkeit bis jetzt ohne Ausflle
I bought this to enable cable connections to Ethernet outlets in each room since my new condo comes pre wired. My cable company was only willing to install the router/modem for wifi access. I used this switch in the wall junction box. Now I gave gigabyte speed from direct Ethernet cable connection in each room.
I bought this to enable cable connections to Ethernet outlets in each room since my new condo comes pre wired. My cable company was only willing to install the router/modem for wifi access. I used this switch in the wall junction box. Now I gave gigabyte speed from direct Ethernet cable connection in each room.
Mejor imposible
Buen producto, funciona perfectamente y que no tenga adaptador de corriente independiente el nico fallo
Was a bit nervous given the lack of history with this brand, but I took the plunge and figured I’d lean on Amazon’s return policy if all went to pot. So far everything’s working great after ~3 weeks running a 6 POE camera system. The cameras are pulling ~60W total, and a few long indoor/outdoor runs (150 ft. on the longest single run, around 500 ft. combined, on all copper CAT6).
I needed a POE+ switch to power some devices as well as some IP cameras. Compare to other known brands this switch has way better specs and cost significantly less. Totally recommend it.
I needed a POE+ switch to power some devices as well as some IP cameras. Compare to other known brands this switch has way better specs and cost significantly less. Totally recommend it.
I purchased this switch for use with an NVR and two exterior IP cameras. It is very sturdy and the supplied L brackets and screws make it easy to mount on the wall. It provides stable power to the IP cameras and I like that it has an internal power supply / IEC power cable instead of a wall wart. No issues after a few weeks and I am pleased with the purchase.
I purchased this switch for use with an NVR and two exterior IP cameras. It is very sturdy and the supplied L brackets and screws make it easy to mount on the wall. It provides stable power to the IP cameras and I like that it has an internal power supply / IEC power cable instead of a wall wart. No issues after a few weeks and I am pleased with the purchase.
Ottimo
Ero scettico sulla marca sconosciuta ma visto il prezzo e le caratteristiche dichiarate ho provato l’acquisto. Preso per creare una piccola rete nella casa vacanze, alimenta un router lte Teltonika, due AP Ubiquiti, sei telecamere Dahua con extender (due a due) e poi collegato ad uno smart tv ed una stampante. La potenza erogata costante non ho mai avuto problemi di alimentazione, lo stesso dicasi per il rate di trasmissione dati, all’interno della rete sempre costante.
Direi in generale che un ottimo prodotto.
Good switch to consider if you want an SFP po
I chose this switch as it seemed to offer good value for a device that also had an SFP port which enabled me to use a fibre optic link. I did make the mistake of choosing the wrong type of SFP transponder initially – make sure it’s 1 GB/s not 10! Now everything has been working well for a month or so. Hopefully it will stay this way.
Good switch to consider if you want an SFP po
I chose this switch as it seemed to offer good value for a device that also had an SFP port which enabled me to use a fibre optic link. I did make the mistake of choosing the wrong type of SFP transponder initially – make sure it’s 1 GB/s not 10! Now everything has been working well for a month or so. Hopefully it will stay this way.
best i ever bough
speeded delivery , sturdy unit , practical internal power supply . nice overall .
will use theses unit from now on.
Working well
I have had this YuanLey 8-port PoE switch installed for about 3 weeks now. It is connected to four Hikvision 8mp (4k) IP cameras, a Zyxel wifi (PoE powered) access point and a Netgear 105PE (PoE powered) switch connected about 75m distant. Since installation this YuanLey switch has worked perfectly. The case is of all metal construction with wall mounting cut-outs. Mine is mounted vertically on a wall. It has an IEC socket (kettle lead) on back for mains power (so much better than an external wall wart).
Importantly, there is no partitioning of network traffic to an uplink port (unlike some PoE switched do). All ports are equal.
The one thing I don’t like is that the port status lights (which show the current port speed) are below the RJ45 connector so in my configuration with the switch mounted vertically on a wall, the port lights are difficult to see unless the cables are lifted out of the way – see one of my pics. But this is a very minor annoyance.
A very good product at a reasonable price. Pleased with my purchase and would definitely buy again!
Working well
I have had this YuanLey 8-port PoE switch installed for about 3 weeks now. It is connected to four Hikvision 8mp (4k) IP cameras, a Zyxel wifi (PoE powered) access point and a Netgear 105PE (PoE powered) switch connected about 75m distant. Since installation this YuanLey switch has worked perfectly. The case is of all metal construction with wall mounting cut-outs. Mine is mounted vertically on a wall. It has an IEC socket (kettle lead) on back for mains power (so much better than an external wall wart).
Importantly, there is no partitioning of network traffic to an uplink port (unlike some PoE switched do). All ports are equal.
The one thing I don’t like is that the port status lights (which show the current port speed) are below the RJ45 connector so in my configuration with the switch mounted vertically on a wall, the port lights are difficult to see unless the cables are lifted out of the way – see one of my pics. But this is a very minor annoyance.
A very good product at a reasonable price. Pleased with my purchase and would definitely buy again!
All in one
A POE switch with no big external PSU, and its no bigger than the ones which have. Brillaint. Top marks…
SMART, POE 1 GB
alimentazione diretta da 230 vca, dimensioni contenute con POE e LAn standard, quello che volevo