DC Power Supply, 32V/10.2A Adjustable Switching Regulated Power Supply Variable Lab Bench Power Supply with 4-Digit LED Display, Alligator Leads and UK Power Cord
 |  |  |  | |
|---|---|---|---|---|
| design style | Modern Fashion | Modern Fashion | Classical low-key | Classical low-key |
| security | Multiple protections FCC certified | Multiple protections FCC certified | Multiple protections FCC certified | Multiple protections FCC certified |
| Output DC Current | 0V – 5.2A | 0V – 10.2A | 0V – 5A | 0V – 10A |
| Output voltage | DC 0-32V | DC 0-32V | DC 0-30V | DC 0-30V |
| Display resolution | voltage: 0.01V current 0.01A | voltage: 0.01V current 0.01A | voltage: 0.1V current 0.1A | voltage: 0.1V current 0.1A |
| Output power cord | x 2 | x 2 | x 2 | x 2 |
| Input power cord | x 2 | x 2 | x 2 | x 2 |
| Weight: | 1.5 kg |
| Size: | UCP3010S |
| Dimensions: | 30.9 x 20.5 x 16.3 cm; 1.5 Kilograms |
| Model: | UCP3010S-UK |
| Part: | UCP3010S-UK |
| Colour: | White |
| Pack Quantity: | 4 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | UNIROI |
| Colour: | White |
| Quantity: | 4 |
| Size: | UCP3010S |
I bought this because I’m always wanting to test low voltage items. I am not disappointed it’s perfect for me and the display is very large and clear.
Been using it quite a lot and it has never failed. The intelligent fan is fairly quiet and only comes on at higher power. I did have a spectacular failure of the Mains lead at the IEC connecter when I went bang but this was due to the lead being a bit cheap so I would swap that out or keep an eye out for perishing. Internal construction looks pretty reasonable I thought. The setting POTS on the front panel for current and voltage are 5X multi turn ones.
This little power supply works great. Easy to use, compact and functional.
This is an excellent product.
it looks good and has a very accurate and consistent output.
It has a wide range of voltage contol and is very responsive.
The only critisism is that it is not reversable – but this is really a bench supply and reversing the direction of a dc motor would result from operating the device or devices this was supplying.
I use it for providing a supply to very large and heavy meccano models having multiple motors of high torque.
Been building a little bench for some electric projects and a decent power supply is a vital component .
Got this PSU as it’s output is upto 32 volts and 10 Amps which is more that enough for any project.
This is a switch mode psu so no big heavy transformer, the whole unit is less than 2kg.
Features
0-32v output & 0-10.2 amps
Includes 2 sets of leads with crocodile clips.
Large blue display that’s easy to read and gentle on the eyes.
Include a grounding post as well as a – + terminals.
Screw posts that also accept small banana plugs
Multiturn potentiometer for voltage and current .
Unit automatically switching between constant current (cc) and constant voltage (cv)
Overall a really nice and light power supply for bench work, the display and output seem pretty accurate in use.
Unit runs pretty cool in all but heavy loads, but there is a cooling fan for running under heavy load. Only small negative would I’d like to see a course and fine voltage and current knobs as it can take quite a few turns for higher voltages / currents.
Overall really happy with this so far, it’s quiet and accurate and the white case is not out of place on my desk.
Hope you found this review informative and helpful.
I was looking for a compact, noise free, DC power supply for my embedded development work. This power supply comes with 30V/10A range.
One more button to turn output ON/OFF without turning off the total power to the supply would have been much handy, but on the lighter note, this supply delivers what it says.
Had this for around 6 months, never had an issue.
So far I’ve used it to anodise an aluminium gear.