DMT D8EE 8-Inch Dia-Sharp Continuous Diamond Extra-Extra Fine
The DMT Difference
Diamond Uniformity, Coverage, Surface Flatness
DMT uses micronised monocrystalline diamonds, precisely sized for a more uniform diamond surface. No other diamond sharpeners offers micronised monocrystalline diamond and most offer the lesser grade poly-crystalline diamond. Mono-crystalline is like an ice cube made up of one particle holding its form while poly-crystalline is like a snow-cone made up of many small particles that get sheared off during use.
Coverage: DMT’s process assures the most diamonds per square inch in the industry providing a more durable sharpening surface.
Surface Flatness: DMT bench stones are engineered flat, assuring even contact with the knife or tool.
Choice of Diamond Surfaces
Interrupted or polka dot surface for which DMT is famous has slightly recessed holes that will collect metal fines (swarf) removed during sharpening to prevent loading. Fast sharpening action; not recommended for pointed or very small tools.
Continuous surface presents a more conventional looking sharpening surface. Fast sharpening action; able to use on small surface edges.
HardCoat, DMT’s newest proprietary surface, is able to withstand the rigours of ceramic sharpening, providing an even longer service life to the sharpener.
DMT Commitment
DMT is committed to providing the best diamond sharpeners in the marketplace. If the sharpener is found to be defective, we will replace it.
Benefits of The DMT Difference
- Precise Diamond Sizing for Consistent Sharpening and Longer Life
- Best Diamond Coverage for Longer-Lasting Service
- Flat Surface for Even Sharpening
- Choice In Diamond Surfaces
- DMT Commitment- Replacement If Found To Be Defective
8-inch Dia-Sharp Bench Stone Many Uses
| | | | |
|---|---|---|---|
HomeJust a few examples of edges around the home this model can address: Chef Knife, Paring Knife, Boning Knife, Fillet Knife, Utility Knife, Putty Knife. | GardenJust a few examples of edges for use in the garden this model can address: Hoe, Axe, Machete, Spade, Trowel, Shovel. | Outdoor/SportsJust a few examples of edges for outdoor and sporting activities this model can address: Folding Knife, Fixed Blade, Machete, Pocket Knife, Fillet Knife, Skinning Knife, Multi-Tool, Hatchet. | WoodworkingJust a few examples of edges for woodworkers this model can address: Marking Knife, Chisel, Plane Iron, Utility Knife, Draw Knife. |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Knife and Tool Edges Able to Address | Straight, Convex | Straight, Convex, Small and Pointed Tools | Straight, Convex, with Base able to take sharpener to surface | Straight, Convex, Small and Pointed Tools | Straight, Convex, with Base able to take sharpener to surface | Straight, Convex, Small and Pointed Tools |
| The Differentiating Feature in Bench Stone Models | 6-in. x 2-in. sharpening surface, available in Plastic (.5 lb) with mounting capability or Wooden box (.6 lb.) | 6-in. x 2-in. sharpening surface, available in single and double sided, narrow profile to fit in tool box,( .84 lb.) | 8-in. x 2.63-in. two-sided diamond surface to step through honing process, comes w/non-skid mat (.51 lb.) or with a base (1.07 lb.) | 8-in. x 3-in. single sided, only bench stone offered in all 6 diamond grits, (2.45 lb.) | 10-in. x 4-in. two-sided diamond surface to step through honing process, comes w/non-skid mat (1.21 lb.) or with a base (1.7 lb.) | 10-in. x 4-in. sharpening surface, offers long, smooth stroke sharpening, (4.2 lb.) |
| Home Applications | Kitchen Knives, Fillet Knife, Box Cutter Knife, Pocket Knife, Putty Knife, Paint Scraper, Screwdriver, Scraper Knife, Straight Razor + | Kitchen Knives, Fillet Knife, Box Cutter Knife, Pocket Knife, Putty Knife, Paint Scraper, Screwdriver, Scraper Knife, Straight Razor + | Kitchen Knives, Fillet Knife, Box Cutter Knife, Pocket Knife, Putty Knife, Paint Scraper, Screwdriver, Scraper Knife, Straight Razor; with base: shovel, sidewalk ice scraper + | Kitchen Knives, Fillet Knife, Box Cutter Knife, Pocket Knife, Putty Knife, Paint Scraper, Screwdriver, Scraper Knife, Straight Razor + | Kitchen Knives, Fillet Knife, Box Cutter Knife, Pocket Knife, Putty Knife, Screwdriver, Paint Scraper, Scraper Knife, Straight Razor; with base: shovel, sidewalk ice scraper + | Kitchen Knives, Fillet Knife, Box Cutter Knife, Pocket Knife, Putty Knife, Screwdriver, Paint Scraper, Scraper Knife, Straight Razor + |
| Garden Applications | Spade, Trowel, Machete, Axe, Hoe, Shovel, Dibble, Cultivator, Pickaxe, Grubhoe + | Spade, Trowel, Machete, Axe, Hoe, Shovel, Dibble, Cultivator, Pickaxe, Grubhoe + | Spade, Trowel, Machete, Axe, Hoe, Shovel, Dibble, Cultivator, Pickaxe, Grubhoe + | Spade, Trowel, Machete, Axe, Hoe, Shovel, Dibble, Cultivator, Pickaxe, Grubhoe + | Spade, Trowel, Machete, Axe, Hoe, Shovel, Dibble, Cultivator, Pickaxe, Grubhoe + | Spade, Trowel, Machete, Axe, Hoe, Shovel, Dibble, Cultivator, Pickaxe, Grubhoe + |
| Outdoor / Sports Applications | Pocket Knife, Tactical Knife, Machete, Multi-Tool, Hatchet, Axe, Ice Pick, Broadheads, Pitons, Fillet Knife + | Pocket Knife, Tactical Knife, Machete, Multi-Tool, Hatchet, Axe, Ice Pick, Broadheads, Pitons, Fillet Knife + | Pocket Knife, Tactical Knife, Machete, Multi-Tool, Hatchet, Axe, Ice Pick, Broadheads, Pitons, Fillet Knife + | Pocket Knife, Tactical Knife, Machete, Multi-Tool, Hatchet, Axe, Ice Pick, Broadheads, Pitons, Fillet Knife + | Pocket Knife, Tactical Knife, Machete, Multi-Tool, Hatchet, Axe, Ice Pick, Broadheads, Pitons, Fillet Knife + | Pocket Knife, Tactical Knife, Machete, Multi-Tool, Hatchet, Axe, Ice Pick, Broadheads, Pitons, Fillet Knife + |
| Woodworking Applications | Chisel, Plane Iron, Marking Knife, Utility Knife, Outcannel Gouge, Scraper, Skew Chisel + | Chisel, Plane Iron, Marking Knife, Utility Knife, Carving Gouge, Carving Knife, Veiner + | Chisel, Plane Iron, Marking Knife, Utility Knife, + | Chisel, Plane Iron, Marking Knife, Utility Knife, Carving Gouge, Carving Knife, Veiner + | Chisel, Plane Iron, Marking Knife, Utility Knife, + | Chisel, Plane Iron, Marking Knife, Utility Knife, Carving Gouge, Carving Knife, Veiner + |
Portable Sharpeners
DMT offers an assortment of very portable, hand-held sharpeners that provide easy storage in home, shop, truck, back-pack or RV. Made to sharpen an array of knives and tools while portable enough for on-the-go sharpening. Interrupted surface models include Diafold, Mini-Sharp, 4-inch Diamond Whetstone; continuous diamond surface stones include 3-inch Credit Card Style, 4-inch stones and Mini-Hone sharpeners; one Double Sided Diafold is available in the HardCoat diamond surface, designed to withstand the rigours of ceramic knife sharpening.
Sharpening Steels
Most steels are designed to align a knife’s blade, but DMT diamond sharpening steels in 10-, 12- and 14-inch models will both align and hone the blade. All are continuous diamond surface but one 12-inch model is offered in DMT’s HardCoat diamond surface, specifically designed to withstand the rigours of ceramic knife sharpening. For those who wish to sharpen with ceramic, DMT offers a 12-inch ceramic steel sharpener.
Bench / Counter Stones
DMT offers a nice selection of diamond bench stones from 6- to 12-inch lengths of varying widths to accommodate home, sport and tactical knives along with a mixture of DIY and woodworking tools. Models include interrupted, continuous and one DuoSharp model in HardCoat diamond. Models include Diamond Whetstone, DuoSharp and Dia-Sharp bench stones.
Guided Sharpeners
If you are unsure about sharpening, try one of DMT’s sharpening systems to assist with proper sharpening angles. All systems revolve around the 7-angle adjustable blade guide utilising either 4-inch diamond whetstones in the Aligner models or Double Sided Diafold Sharpeners in the MagnaGuide line. The blade guide can also be used with DMT’s bench stones.
Care and Use of DMT Diamond Sharpeners
All models are designed to be used dry or with water so there are no messy oils and extensive clean up to worry about. Always clean the DMT sharpening surface after sharpening. Rinse surface with water and wipe dry. After several sharpenings, clean more thoroughly with a mild abrasive and brush; rinse surface with water and wipe dry.
Always put away dry and store in a dry environment. Use leafing (paper towels, cloth, plastic storage bag) in between your bench stones to prevent abrasive sides from rubbing.
- Use Dry or with Water
- Clean and Wipe Dry
- Store Dry
About Sharpening with DMT
Get the Most out of your DMT Sharpener
There is a ‘break-in’ period for your diamond stone. Initially, it will feel especially rough but will smooth over time without impacting performance. Let the diamonds do the work; just light strokes with the edge to sharpen, same number of strokes each side. Approximately 5 or 6 strokes per side (depending upon condition of edge) compared to 30 strokes per side on a conventional stone, saving time and extending the life of the knife or tool. Start with a coarser grit for damaged or dull edges and work to finer grits. The work the edge is to do will help you determine the grit needed: Rough work, end with coarse grit (cutting cardboard); finer work, work through finer grits (food preparation).
- Initial break-in
- Light strokes to sharpen – let the diamond do the work
- Faster than conventional sharpening methods
- Rough work – coarser grit
- Fine work – finer grit
| Weight: | 1 kg |
| Dimensions: | 35.56 x 16.51 x 8.89 cm; 1 Kilograms |
| Model: | D8EE |
| Part: | DMTD8EE-BRK |
| Colour: | Grey |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Acme United Corporation |
| Colour: | Grey |
| Quantity: | 1 |
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
ich benutze den Schleifstein quasi tglich um unsere Kchenmesser wieder auf Schrfe zu bringen. Super leicht, bin sehr zufrieden.
Great set of stones for a great price. Well worth the money if you sharpen knives with high end premium steels such as M390 or other high hardness wear resistant steels. Just as good as DMT stones, but much less expensive.
Need to remove metal? This is the DMT stone you want. I use it to re-establish a new angle on plane irons. The work great. Once angle is established, going through the rest of the DMT’s happens fast.
Absolutely the most aggresive stone I have and I have more than 20 stones. I wish they radius the edges like this on all their stones.
I bought three different grits and after a month of use all doing well seems like diamonds are well bonded to plates all seem to work well and I finish with a leather strop with green compound
I bought three different grits and after a month of use all doing well seems like diamonds are well bonded to plates all seem to work well and I finish with a leather strop with green compound
I bought three different grits and after a month of use all doing well seems like diamonds are well bonded to plates all seem to work well and I finish with a leather strop with green compound
I bought three different grits and after a month of use all doing well seems like diamonds are well bonded to plates all seem to work well and I finish with a leather strop with green compound
Ein ganz klasse Produkt! Fr mittelscharfe Messer, die wieder durchs Material gleiten sollen, einfach drei, vier Zge auf dem extrafine fr jede Seite, Grat entfernen, fertig.
Fr Messer, die extrem beansprucht wurden und am besten noch nie geschliffen, muss man sich halt von grob nach fein hocharbeiten. Dabei ist natrlich die Schwierigkeit, ber eine viertel Stunde Schleifen den gleichen Winkel zu halten, aber immer noch besser als bei einem echten Stein, bei dem das ganze lnger dauert und der auch noch dauernd angerichtet werden muss.
Ein ganz klasse Produkt! Fr mittelscharfe Messer, die wieder durchs Material gleiten sollen, einfach drei, vier Zge auf dem extrafine fr jede Seite, Grat entfernen, fertig.
Fr Messer, die extrem beansprucht wurden und am besten noch nie geschliffen, muss man sich halt von grob nach fein hocharbeiten. Dabei ist natrlich die Schwierigkeit, ber eine viertel Stunde Schleifen den gleichen Winkel zu halten, aber immer noch besser als bei einem echten Stein, bei dem das ganze lnger dauert und der auch noch dauernd angerichtet werden muss.
I had many manual, quick sharpeners but this one beats them all. A large slab of imbedded diamonds… it should. So far it fulfils my expectations ( teamed it up with a nice leather strop).
I had many manual, quick sharpeners but this one beats them all. A large slab of imbedded diamonds… it should. So far it fulfils my expectations ( teamed it up with a nice leather strop).
This sharpening plate works great. I have several different sizes. Takes some time to break in. Ships fast.
Bit expensive for this coarse a grade. But very flat and strong.
Liked the thickness of the plate; good for flatening of stones.
I also bought the extra-extra fine. No complaints there, either, but maybe not as useful. It amuses me that that one has a label to show the other side has the diamonds–both sides are so smooch, it’s hard to tell by touch. Ultimately, I think I will buy a super fine ceramic stone, but I don’t regret either of these DMT stones.
When I turned to chisels, I soon realized the extra-fine is too slow for flattening the backs. I decided I needed a coarse, and/or fine, to start the flattening or grind out nicks. I decided to get both. Then I saw the Trend for a good deal less than it had been. Rob Cosman uses the Trend and a 16000 grit Shapton, and that looks like a good system, so I decided to spring for the Trend now, and maybe get the Shapton later. Probably should have done that to start with. Now I have the 300 grit I needed, plus the 1000 grit side, plus another 1000 in the DMT, plus the 8000 grit xx fine. Little bit inefficient on my part. That said, I may yet buy the coarse and fine DMT to make a set. After all, you can’t have too many tools…
Meanwhile, saving up for that Shapton. I am not mentally well.
UPDATE: The more I use these, the better I like them. Tried them on a really good chisel. Takes patience with really hard steel, but results are worth it. Turns out that xx-fine is worth having, too.
Great product and well worth the price.
It’s useful for people who need to reset the bevels on plane blades and chisels that don’t have a bench grinder. If you use a honing guide with a brass wheel it will wear that wheel quickly. As a result I place another diamond plate upside down from dmt next to it and run the wheel on the smooth side without the wear issue to my honing guide.
Great product and well worth the price.
It’s useful for people who need to reset the bevels on plane blades and chisels that don’t have a bench grinder. If you use a honing guide with a brass wheel it will wear that wheel quickly. As a result I place another diamond plate upside down from dmt next to it and run the wheel on the smooth side without the wear issue to my honing guide.
Billig sie die Platten nicht, abe jeden Cent wert!
Die Anleitung habe ich bei Youtube im Kanal von Schmiedeglut gesehen und dann hier auch von Schmiedeglut gekauft.
Der Versand ging super schnell! Gut verpackt! Danke fr die tollen Videos und den super Service! Weiter so!
Tipp: nicht zu fest drcken!!! Sonst knnen die Platten beschdigt werden!
Die DMT Produkte sind Llgemein hochpreisig. Dafr funktionieren Sie sehr gut. Der Antrag ist sehr stark. Die Handhabung ist super.
Ich hoffe der Stein hlt fr den Rest meines privaten Messerschleifer Lebens. Dann bin Ich voll berzeugt.
Die DMT Produkte sind Llgemein hochpreisig. Dafr funktionieren Sie sehr gut. Der Antrag ist sehr stark. Die Handhabung ist super.
Ich hoffe der Stein hlt fr den Rest meines privaten Messerschleifer Lebens. Dann bin Ich voll berzeugt.
This diamond “stone” is pretty much wet it and sharpen. Cause it is steel it doesn’t warp or wear away. Perhaps if you are really into abusing it, I think you could somehow hurt it. But barring anything that extreme, this stone will be flat, and sharpen your blades easily and effectively. Really just wet it and start sharpening. It’s that easy. Wipe it down and perhaps a coat of oil to keep it from rusting and you are done. I will say it doesn’t feel like you are doing anything until you feel the burr and it took half the amount of strokes to get there. Now if they made something with a higher or finer grit, I’m down to get that one too.
It is heavy so, don’t drop it. It probably won’t get damaged, but it will surely hurt you if it falls on you or perhaps your terrazzo tiles.
The quality of the diamond plate didn’t seem as good as the sharpal diamond plate but got smoother after break-in period ,I think they could clean them up better in their manufacturing process considering they claim to be the best , they work well, scratch pattern not 100 percent consistent maybe it will get better with further use.
Great product. Fast cutting compared to aluminum oxide stones. I free sharpened four large kitchen knives in the time it takes to do one small knife on a Lansky. Produced edges that were sharper than new.
A mi me salio por unos 68.
La compr para devolver la geometra de mis piedras pero tambien se puede usar para resvastar zonas que requieran quitar mucho material.
A mi me salio por unos 68.
La compr para devolver la geometra de mis piedras pero tambien se puede usar para resvastar zonas que requieran quitar mucho material.
A mi me salio por unos 68.
La compr para devolver la geometra de mis piedras pero tambien se puede usar para resvastar zonas que requieran quitar mucho material.
A mi me salio por unos 68.
La compr para devolver la geometra de mis piedras pero tambien se puede usar para resvastar zonas que requieran quitar mucho material.
A mi me salio por unos 68.
La compr para devolver la geometra de mis piedras pero tambien se puede usar para resvastar zonas que requieran quitar mucho material.
Vistas con una lente de aumento, son todo un espectculo al percibir la uniformidad con la que estn distribudos los diamantes monocristalinos (los de mayor calidad).
Esta granulometra “Dia Sharp COARSE” denominado en la pgina de venta como “Grueso” es la adecuada para el vaciado delicado de cuchillos, antes de afilarlos con piedras de grano ms fino.
Yo la utilizo humedecida, aplicando muy poca presin, con mucha paciencia. Nada de hincar con fuerza la punta del cuchillo hasta que salten los diamantes por el suelo.
Como cualquier herramienta con diamantes, al principio “come mucho material” y despus es cuando ya coge su ritmo de trabajo.
Al terminar, lavarlas con agua y secarlas con un trapo limpio, esperando que haya perdido todo rastro de humedad antes de guardarlas en su caja.
La planitud de la placa es tan buena que se puede utilizar para lapear (rectificar) las piedras de afilado, ya sean naturales o sintticas, siempre con agua.
Por supuesto, no comparar estas placas con similares muy baratas que venden en sitios chinosos on-line.
Afilar un cuchillo es un arte que hay que hacer con mucho mimo.
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Affutage sans problme d’aciers trs durs contenant des carbures de Vanadium (k390) ainsi que d’autres aciers fritts (Vanadis 4E, cpm-3v). Le grain ‘fin’ convient bien l’affutage de couteaux, ventuellement suivi d’un passage au strop avec des pates diamantes (5/3 et 1/0 microns).
Don’t over press or over sharpen. Steady medium pressure for 5 full strokes per side. Lubricate with windex rinse with water when done and store dry in open air wrapped in paper towel.
Takes practice. Watch YouTube for details. It’s not hard with a little practice. Long knives are trickier than short ones. For everyday kitchen knives you only *need* the FINE stone. I only use the extra fine when I run out of things to sharpen. If you could only have one get the 8″ FINE stone.
Don’t over press or over sharpen. Steady medium pressure for 5 full strokes per side. Lubricate with windex rinse with water when done and store dry in open air wrapped in paper towel.
Takes practice. Watch YouTube for details. It’s not hard with a little practice. Long knives are trickier than short ones. For everyday kitchen knives you only *need* the FINE stone. I only use the extra fine when I run out of things to sharpen. If you could only have one get the 8″ FINE stone.
I bought this Diamond Plate looking for an aggressive cutting stone to regrind the primary bevel on my chisel and plane irons. I’m impressed by how fast and well this stone cuts. I found it faster than my 8″bench grinder and easier to get consistent results as I can set the angle with the same jig I use to hone my irons after. Added bonus, it can be used to keep your water stones flat too!
Strait out of the the box did not look like it was gonna be coarse enough.but after first use wow this this thing took an old 1″junker chisel of mine back to a clean edge very very fast.only time will tell the rest as far as longevity.
I gave it four stars for value, but that should probably be four and a half as it was a lot less money than the DMT fine stones. Durability is looking like a three stars as I can see places where I am wearing through the diamond coating. You need to be careful with the outer edges, and not use it with slightly rusty metal, like restoring old planes for instance.
All in all though, my DMT sharpening experience has been incredibly positive. My tools are far sharper than ever before, and you would not believe how nice a big kitchen knife feels to use after honing down to 8000 grit. I do actually use a motorized leather strop that I made to finish off with green buffing soap.
Great stone uses for sharpening my chiclet. New to sharpening so it took awhile to get the edge I wanted. Will have to get a course one as I used the fine during the whole process
Great stone uses for sharpening my chiclet. New to sharpening so it took awhile to get the edge I wanted. Will have to get a course one as I used the fine during the whole process
En verdad estas placas diamantadas son una maravilla, ayudan enormemente en el afilado de las cuchillas y formones. Por fin mis herramientas estn con el filo adecuado, al usarlas se nota la diferencia.
Esta placa la uso para pasar a una piedra de agua ms fina, pero si no tuviera la piedra, bastara solo asentar el filo un poco y a cortar.
Cuts fast. Its the course stone you need for removing metal on chisels
Cuts fast. Its the course stone you need for removing metal on chisels
Cuts fast. Its the course stone you need for removing metal on chisels
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.
This is fantastic and removes metal aggressively. It works well when I need to set the bevel or lap the back of my tools. This saves me time and effort compared to sharpening on my previous water stone.