10 X Sanlumia LED Fire Rated Downlight Can GU10 Recessed
10 X Sanlumia LED Fire Rated Downlight Can GU10 Recessed Ceiling Twist & Lock Interchangeable Downlight IP20 White
Adjustable height
With its adjustable height requiring just 85mm of recess space, it’ll prove perfect for your ceiling if there’s not much room for manoeuvre.
Slim-line bezel
This unit uses a slim-line bezel, can well attach to the ceiling and leaves a neat ceiling.
Air ventilation slots
They are fitted with air ventilation slots on the side of the can to provide the LED with air flow. Some downlights have no ventilation holes, allowing heat to build up which damages the LED. Integrated intumescent material completely seals the downlight and air ventilation slots and cut-out in the event of fire.
 |  |  |  | |
|---|---|---|---|---|
| Finish | White | White | White | White |
| Cap | GU10 | GU10 | GU10 | GU10 |
| Height | 85-115mm | 85-115mm | 85-115mm | 125mm |
| Cut out | 75mm | 75mm | 75mm | 75mm |
| Protection Rating | IP20 | IP65 | IP20 | IP20 |
| Fixed/Tilted | Fixed | Fixed | Tilted | Fixed |
 |  |  | |
|---|---|---|---|
| Watt / Lumen | 5W / 450Lm | 9W / 750Lm | 5W / 450Lm |
| Finish | White/Chrome/Satin Nickel | White/Chrome/Satin Nickel | White/Chrome/Satin Nickel |
| Height | 32mm | 32mm | 32mm |
| Cut out | 68-75mm | 68-75mm | 68-75mm |
| Protection Rating | IP20 | IP20 | IP44 |
| Fixed/Tilted | Tilted | Tilted | Fixed |
| Dim | Non-Dimmable | Non-Dimmable | Non-Dimmable |
Why buy form Sanlumia?
We have offered a wide range of lighting solution for residential and commercial needs for more than 15 years. Continued innovation is our core strategic and we aim to provide our customer cost effective products with the latest lighting technologies.
We are based in West Midlands (UK VAT), If you have any concerns please let us know.
| Weight: | 2.55 kg |
| Size: | 10 |
| Dimensions: | 37 x 30 x 10.2 cm; 2.55 Kilograms |
| Part: | Unknown |
| Colour: | White |
| Pack Quantity: | 10 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Realm lighting |
| Dimensions: | 37 x 30 x 10.2 cm; 2.55 Kilograms |
| Quantity: | 10 |
| Reference: | unknown |
| Size: | 10 |
I received this product, it was delivered on time, well packaged , easy to fit. Unfortunately I realised I should have ordered butt hinges, as these are ball bearing hinges, and are too big compared to butt hinges I have on the doors. My mistake.
I bought these for the living room of my flat. Although the instructions recommend a 75mm holesaw the body of the light is just over 65mm so I decided to use a 70mm hole saw instead. I’m glad I did as i think it’s given a tighter, better fit in the hole. My ceiling has a rippled finish but the lights still sit flush with no scraping required.
The connection block is a bit fiddly and the cable grips are very tight, even for 1.5 twin and earth. Having said that all lights were connected successfully first time.
The description doesn’t make mention whether they are IC (insulation contact) rated but the part number is FR20-IC which would suggest they are. If you are using 4-5W LEDs then they will barely even get warm so there should be no issue laying insulation over the top.
If you are replacing standard pedant lights with these you will need to fit a separate junction box as there is not enough ways to run a switched live.
I was undecided whether I would need 9 or 12 for my room which is 5x5M. I settled on 9 lights with an extra 1 above the entrance door. With 4W bulbs it’s way more than enough light on full brightness.
All in all a very good cost effective upgrade to my front room.
Pair with some WiFi smart bulbs for the ultimate stylish lighting.
Easily fitted with good instruction. Very solid but the bulb holder clip needs a re-design.
These downlights are very easy to install and look great.
Good quality product, arrived quickly. Ordered 2 boxes and all were great!
WELL MADE AND EASY TO FIT CABLE CONNECTION IS EXCELLENT
These work perfectly, very easy to install. They are the same as the Screwfix LAP but different name and cheaper. The only downfall Iv had well gotten is that iv finished fitting them apart from 1 as the GU10 connection is cracked/broken. Other than that it’s all good. I’ll see if I can get in touch with Amazon or the supplier to get a replacement sent out.
Found these and they were perfect, people have put mixed reviews on here but they were easy to fit, good price and arrived in perfect conditio
Hi have you sees lights several times now simple to fit slot lovely in the hole cut out faultless
To save doing too much work, I was looking for lamps that required a 75 mm diameter opening. Obviously if you don’t have the holes or they’re not the right size, you have a bit more work to do, including reinforcing the hole as springs on these type of fittings can damage plasterboard ceilings. Just note you may just about get away with a 76mm opening, but much more and the fitting is likely to pull into the hole as the bezel needs to be detached before fitting. One of mine was slightly large and I had to do a bit of work to fill the edges and put reinforcing. The bezel is a few millimetres wider, so if the hole is not perfect, this will hide some imperfections. These were purchased to replace low voltage lighting with transformers which were failing. Wiring these in was relatively easy as the connections are push fit rather than having to use a screwdriver, which for a few years has been my preferred way of making electrical connections.
Once the main fitting is in place, you slot a lamp into the bezel. A metal clip holds the lamp in place. I used Philips LED GU10 Light Bulbs,3.8 W (50W) – WarmGlow Dimmable, Pack of 6 in one room and the non-dimmable in the other room. The Philips bulbs in themselves provide brilliant light at very low energy consumption, but as I believe these bulbs are more compact than many low energy light bulbs, the clip on the bezel did not hold down the bulbs as firmly. When I fitted the bezel, which requires a quarter of a turn, the bulbs would sometimes ride up on one edge. This meant fiddling around until they lay flat. As is say you can get bulbs that are not as compact, but do pay attention to the spec of these fittings because some bulbs could be too long in length. It the whole was slightly too big the main fitting could go into the hole a bit too much making the fitting of the bezel difficult. However, this is easily resolved by pulling the fitting just a little out of the ceiling, fitting the bezel and letting the fitting spring back into the ceiling.
I did have one big problem with one of the fittings. As another reviewer mentioned the metal the spring is made of is quite weak. One snapped as shown in the picture and the metal went through my finger. I contacted the seller and a replacement was sent fairly quickly after they finally understood what I was asking 5 emails later.
So, overall, despite the issues with the spring on the one fitting, I will buy these again for the landing. They look very, very good and compared with many downlights, easy to fit. They are also very good value for the money.
Easy installation wiring spring loaded grip as apposed to small fiddly screws.
hey have not been fitted yet but my electrician says they are of a very good standard and should be easy to fit..many thanks
Used by our electrician for our living room,
He did comment the the part to wire up could have been more generous, however he got it done just fine.
We asked for this type of unit over sealed units with bulbs, because we wanted to use HUE Bulbs.
We chose white to blend in with the ceiling, won’t try to describe the shade but we are happy with the look.
The units have a nice low profile bezel and fit snug to the ceiling, sometimes requiring a wiggle to seat allowing for insulation getting trapped.
Someone complained that removeing the full bezel marked the paint on the ceiling, this is easily avoided by pulling the fitting down slightly away from the painted surface.
Have brought 10 more for the kitchen definitely recommended.
i found it easier to take the terminal out of its cover,not forgeting to press the levers tha hold the wire in place DOWN inser rhe stripped wire ends and release
he way this fitting has been designed is excellent especially if you need to change a bulb. ordinarily this is a pain and time consuming but these fittings make it so much easier and you do not have to worry about the length of the bulb as there is plenty of space for a short length bulb up to a long length bulb ie 50mm to 75mm easily.
I fitted these lights for a mate earlier in the year and was really impressed with the quality, cost effectiveness and ease of installation. So when I needed 14, I didn’t hesitate to purchase them.
I’ve just finished installing all 14 and I’m really happy with the results.
Great product easy to install even for me a committed diy hate
These downlights are by far the best I’ve bought yet main reason is , the connectors where push button no need for screw driver had them fitted in very little time would highly recommend A++++
And postage was excellent also again A+++ thank you would definitely buy from you guys again.
Kind regards.
Alfie.
After a long time searching for down lights and I am so glad I decided on these. They arrived quickly and well package and have much better construction than my old ones. They are super easy to wire and springs are strong enough to hold the lights in position. I am extremely pleased with the final appearance. Would recommend definitely.
These are good fittings, easy to install and with a sensibly designed connection box.
Seemed to be a good product although once fitted one light fitting was faulty. I do understand that there are times when equipment fails and it is still annoying having to return items and get them replace. Saying that the build quality and fell look fine. Now all sorted as there customer services were very good, thank you
Great product and exceptional service from the supplier.
Very pleased
Would be happy to recommend both the product and supplie
Would have been a 5 but on a couple the fixing clips kept jumping out of there fixings, thus catching my finger, and these springs hurt.
Very easy to install although the lack of an earth wire i always find concerning with lights
My electrician said he was impressed with these, so they must be good, good quality and good design.
They came boxed nicely and not bent or damaged in box. These look great and really transformed the space. Installation wasn’t difficult. Nice to have good products with reasonable pricing and fast delivery. They are well attached to the ceiling with no wobble. I am getting ready to buy another box to do a couple more rooms in my house I would have no problem recommending these to family and friends.
Ease of wireing with push fit connections, neat totally enclosed. Twist fit useful. Used for under the eaves.
Once installed, you really can’t tell them apart from pricier alternatives. Good value for money.
Like, just as described, being able to change the bulb will ensure a long life, quality finish.
This downlight is easy to fit and looks great with a neat, flush fit to the ceiling. The twist removable cover makes it very easy to fit or replace bulbs.
Used as down lighters in a hall. Springs on a couple were a bit vicious but they look good.
Very good lights and so simple and fast to fit with cable clamps rather than screw terminals which saves so much time.
Will definitely use again.
Easy to install and the company are very very helpful if u have a problem,
I ordered the white 1s instead of chrome by mistake and the company was still kind enough
to send my the chrome covers even after the return date expired.
Product 10/10
Company 10/10
Change a number of old spot light because of the change of fire has the old lights was not has fire safe has led light the old ones got ho
Good quality downlights, very happy with them and great value.
Perfect .just ordered the wrong colour which I need to change.
Really great downlights. Got led bulbs from screwfix and they look great fitted. Push fit connectors are really handy & make installation a doddle.