Reboot Plasma Cutter 50Amps 230V Non-Touch Pilot Arc High
Reboot Plasma Cutter 50Amps 230V Non-Touch Pilot Arc High Frequency Metal Cutter Plasma Cutting Equipment RBC5000L 3 Year Warranty
15MM carbon steel
How to connect the air compressor:
19 Responses |
|---|
Does what it says, but this is made for hobbies not major industrial work
Does what it says, but this is made for hobbies not major industrial work
Powerful and cheap
Use this plasma cutter a few times its excellent for the price cant fault it. Regulator on the back is a little knaff but that can be changed for a better quality one. Run on a standard 13a 3 pin plug and its been running fine
Cuts very well and is lightweight for easy access to jobs. .
Very good product. Cuts all steel as it says. Used it on 5mm steel plate and it cut nice and clean.. Just get your settings correct. Also very fast delivery. Arrived a day early from Amazon.
Nice size to Handle
Well packaged tried it out on test piece 6mm place made nice cu
Works great price is great get this you won’t be disappointed. And for the people giving poor reviews for some $5 dollar fittings or that reboot fitting didn’t fit their hose probably shouldn’t be using these types of equipment anyways
This isn’t a high end expensive plasma cutter. Yes you may have to go buy an air fitting if you don’t have one. But I’m more than happy with it. I cut 1/8” steel like a hot knife through butter. Works great!!!
This isn’t a high end expensive plasma cutter. Yes you may have to go buy an air fitting if you don’t have one. But I’m more than happy with it. I cut 1/8″ steel like a hot knife through butter. Works great!!!
Brilliant piece of ki
Brilliant piece of kit we’ll worth the money cuts metal effortlessly wasn’t sure how to do it at first but once the setting are right it glides though metal I would highly recommend this piece of ki
Very useful tool
Had a load of steel plate to cut for a small project, thickness ranged from 7mm to 10mm.
I didn’t fancy doing all of this with an angle grinder, very noisy, I would have used up about 20 cut off discs, and also far more dangerous. So I bought this little beauty. I say little because compared to the plasma cutters I’ve used in the past this thing is very small and light. I borrowed an old 30 amp cutter recently and it took two of us to lift it into the car.
I’ve posted a couple of pictures. The piece of steel is 10mm hot rolled plate cut at 45 amps and 70psi, it went through it like a hot knife through butter.
It comes with a 32 amp plug fitted and I’d highly recommend getting a proper socket fitted for this by a qualified electrician.
If you only need to cut thin materials then you can get an adapter to allow you to use a standard 13 amp socket. I haven’t tried this yet but I’ll update this review when I know how many amps I can run before blowing the fuse in the plug.
Overall very pleased with this machine and looking forward to using it on future projects, would recommend.
I have been holding off on buying a plasma cutter mostly due to the cost of them. Recently I had project that really needed a plasma cutter, so I searched for a well rated but cost sensitive plasma cutter on Amazon. My research lead me to the Reboot 45 amp unit. Well, after using it to cut some 16ga steel, I have to say its AWESOME. I had no prior experience with a plasma cutter and the manual that comes with this unit is not much help, but YouTube came thru with some helpful videos and really this unit is easy to setup and just plain works. I had no issues with the unit and it really produced nice cuts when my hand was steady and smooth. The unit really is a joy to use and it's compact size doesn't take up a lot of space in your shop. For a hobbyist I totally recommend this unit!
I have been holding off on buying a plasma cutter mostly due to the cost of them. Recently I had project that really needed a plasma cutter, so I searched for a well rated but cost sensitive plasma cutter on Amazon. My research lead me to the Reboot 45 amp unit. Well, after using it to cut some 16ga steel, I have to say its AWESOME. I had no prior experience with a plasma cutter and the manual that comes with this unit is not much help, but YouTube came thru with some helpful videos and really this unit is easy to setup and just plain works. I had no issues with the unit and it really produced nice cuts when my hand was steady and smooth. The unit really is a joy to use and it’s compact size doesn’t take up a lot of space in your shop. For a hobbyist I totally recommend this unit!
Is very impressed on how smooth the easy it cut easy operation and easy assembly do recommend i
Is very impressed on how smooth the easy it cut easy operation and easy assembly do recommend i
I just started using the machine today and I was very happy with how well it cuts, I am glad it doesn't have a safety so if I want to mount it on plasma table
I just started using the machine today and I was very happy with how well it cuts, I am glad it doesn’t have a safety so if I want to mount it on plasma table
Cuts better than expected. My hypertherm recently died bought this as a temporary solution, i was impressed actually, cuts better than i expected. Have made multiple cuts on material up to 1/4” and has been great so far. I was able to finish a job and unit has already payed for it’s self.
Cuts better than expected. My hypertherm recently died bought this as a temporary solution, i was impressed actually, cuts better than i expected. Have made multiple cuts on material up to 1/4″ and has been great so far. I was able to finish a job and unit has already payed for it’s self.
Just cut a few pieces of 1/8 steel but wow, this thing cuts.
Just cut a few pieces of 1/8 steel but wow, this thing cuts.
works great and does what I needed for the price
works great and does what I needed for the price
Absolutly love this machine. This cuts through like butter and the handle is so comfortable. I love that the bottom of the handle has a ball joint allowing flexibility to move without stiff hoses. This was easy to set up and ready to go. Absolutly love it.
Absolutly love this machine. This cuts through like butter and the handle is so comfortable. I love that the bottom of the handle has a ball joint allowing flexibility to move without stiff hoses. This was easy to set up and ready to go. Absolutly love it.
For the money is it’s a great deal. Ran it for two hours cutting 1/8 in plate .
For the money is it’s a great deal. Ran it for two hours cutting 1/8 in plate .
The Reboot Plasma Cutter is easy and fun to use. It cuts cleaning in both stainless steel and mild steel. It has been a great help in my current projec
The Reboot Plasma Cutter is easy and fun to use. It cuts cleaning in both stainless steel and mild steel. It has been a great help in my current projec
I like that it cuts pretty good. I disliked the air valve regulator- it is pretty flimsy. Hose clamps are not good and hose is too big for barbs. Put my own fittings on and it’s good.
I like that it cuts pretty good. I disliked the air valve regulator- it is pretty flimsy. Hose clamps are not good and hose is too big for barbs. Put my own fittings on and it’s good.
Great plasma cutter smooth cut own 3/8 steel. You want a good plasma cutter this one is for you.
Great plasma cutter smooth cut own 3/8 steel. You want a good plasma cutter this one is for you.