Auraglow PIR Infrared Motion Sensor Outdoor Twin Security

I needed to replace a Biard fitting which only lasted 14 months before the LED unit failed. A shame really as in my opinion it was one of the smartest looking security lights out there. I searched high and low for a suitable contender and decided upon a twin lamp unit so as to light up part of my garden previously uncovered by the previous single lamp fitting. There are many! The few reviews available that I read about this one all declared a quality look and feel which alerted my curiosity. I was worried that the 46W output would not be enough as it is shared by the two lamps. It is not the cheapest unit out there but has a two year warranty and I know Amazon would accept a return if it was not suitable. The unit was easy to mount, I already have a junction box and so fed a round three core 0.75mm into the provided cut out. I think flat twin and earth would not be the best to connect up inside the lamp. In test mode I was able to set up the timer, I have never been impressed with these dial type settings. It remained at 30 seconds until I turned the dial almost a third of the way which then gave a minute of light. The lux setting I set to full darkness which operates the lamp at dusk. The sensitivity is excellent and the more you tilt it upwards the bigger the sensitivity area. I needn’t have worried about the power, both lamps seem to give off more light than my previous single 50W fitting. It looks stylish although not as much as the Biard fitting which was slim line with a full glass front. This one is plastic but at least there is nothing to corrode. I applied a little silicone to the heads of the fixing screws so hopefully it should be weather proof, the fitting is IP54 rated which is more than some.
I shall update the review if either the lamp/lamps fail or water gets in!