HITBOX Multifuctional MIG Welding Machine -200A with Color

 

ca va super bien connecter sur le 220v j’ai souder du 1/4 pais ca va trait bien.j’espert que durabilit sera la…se que j’aime moins c’est de trouver les consumable compatible j’ai retourne la premire commende la deuxime tait ok

 

Bought this for small tasks around the yard. Easy to use and easy to set up. Good product for MMA and Mig

 

Husband hasn’t complained about this welder, so it must work good. Doesn’t take up a lot of room in the garage. Came as advertised

 

Purchased the welder online.
The price was fair.
Would have preferred to receive the stick as well.
I received it promptly.
So far, unit seems to be working well.
Thank you.

 

Ottimo, qualit perfetta. Honesautico una bombola da 20 litri di argon, prodotto testato. Sono un utente amatoriale in ogni caso.

 

I had 2 lights that did not work on the front one for arc one for flux core I sent a message and had help right away sound like they will send me the whole front panel. I am over all happy with this welde

 

Purchased early part of November 2019…have welded about half a spool of wire now with it and it welds great…way better than my hobart 140. I sold the Hobart used and got enough out of it to pay for this one. I have welded everything from thin auto sheet metal to heavy c channel onto vehicle frames. I really love this thing…it makes a novice look like a pro. If it quits working I will report back but as of right now…love it.

6 Month update….still going strong. 3 spools or more into it now and have been welding with it a lot on a project I am working on lately. Was concerned that the duty cycle would have issues but so far it just welds non stop. I have been putting down beads at full power on big steel 2 feet long at times without stopping. Just keeps going. I love this thing. If it died today I would buy another and blame myself for not adhering to duty cycles.

 

My choosing, selecting, testing, and really great results at the end of the day, after searching for my Dream Welding Machine (DWM) in so many proposals and promotional jungles.

THE PURPOSES:
Alteration of the Standard retail sales equipment; Development of the Bespoke retail equipment (MS steel 0.8-1.5 mm, rarely 4-6 mm; SS 0.5-1.2 mm);
Developing and building up customized tools and devices (Steel: 10-20 mm)
tor the production of the different Stands and Displays for the Retail Sales Points, and
Many other different, and casually needs.

THE CRITERIA:
Able to use at any site, away from my workshop, having the simple Single phase power supply;
Capacity, not less than 200 Amps, with average duty cycle, about 60% or greater.
Equipped by MMA, MIG, and TIG options, at least DC, because of AC/DC will come too expensive;
Able to provide definitely nice and durable welding seam, acceptable even on the visible surface of the Retail equipment.
At the same time, along with so wide and high expectations of the technical criteria and capacities, Investment in that should be in the range of the Economy Class.

RESULTS:
After purchasing all of the accompanied things and devices, e.g. Argon and Mixture cylinders, Gas regulators, Grinders, Cutting and Bending devices and so many other small things, the needful to be able to start our new business direction described above, finally I was ready to test My New Adult Boy Toy — HITBOX MIG 200 A

My goal was to achieve for experienced welders very well-known lovely MIG song testifying to the well-balanced values of the Ampere, Voltage, and Wire-feed. It should sound like a cicada’s song.
Not a rude, not an intermittent, at the same time not hissing when you seeing just a melted metal in the wide welding pool. My goal was to achieve that typical nice MIG song.
IT’S DONE (!)

The next will be just a routine hand experience relevant to the Gas consumption, length of the welding wire out of the MIG torch (the distance), movement and and variable angles of the MIG torch, depending on the needs for the deep on shallow penetration, depending on to the welded materials, especially if the different thicknesses of them.

SATISFACTION.
At the moment I’m so satisfied with the results achieved with the HITBOX 200 MIG option, especially with the fantastic Synergic Feature, allowed to simply increase or decrease the power of the welding, by the Amperage adjustment only, due to Voltage will follow to your once adjusted balance between them.

By the 2 hours’ exercises, I have achieved really wide ranges of the welding seam, able to penetrate THROUGH (!!!) 4 mm plaint MS detail placed on the welding table (A/V 130/19.4) and just by the reducing amperage (voltage comes down automatically) to weld 0.5 mm pieces of small MS sheets not only by the fixing spots but even by the nonstop seem. (A/V 80/16.5 | 60/15.6 | 50/15.2 | 40/14.8)

RECOMMENDATION for the UNITWELD team:
Simple Setup chart should be available e.g. in the machine spool cover, to avoid the upset of the beginners, and make the life easier for any welder, owner of their DWM (decoding of abbreviation see above)

MY PERSONAL EVALUATION
of the HITBOX MIG 200 a (MIG device):

IT IS AWESOME, WELL DONE AND COMPLETELY MEET MY EXPECTATIONS

Therefore, I RECOMMEND CHOOSING THIS MODEL if your targets and purposes are more or less similar to my criteria, described above.

***********************
About the TIG device:
I’ll give my feedback a bit later on.
I should adjust the Gas inlet connection for that.
Meanwhile, the first impression I already can say:

So, if you carefully read the description and compare it with the proposal of the HITBOX MIG 200 A, you will recognize the TIG as an option, only, but this particular device is NOT INCLUDED in the package that I got in my hands 🙁

However, after a short written interaction with UNITWELD Team, by the efforts from Mrs. Cynthia, particularly, finally I get the TIG torch as well, as a promotional option, just it took time. Now I should solve the Gas inlet connection with an existing connection in the original version.

Therefore, Guys, see you soon, after I will test that one.
I really hope that I’ll be the same nice surprised for the TIG capability as well.

BR Valdis (UAQ)

 

I just got the unit before I went on vacation…..was only able to quickly set up and try the stick welding feature….it seemed to work just file….will be checking out the mig and tig this week….. seems like a great value so far….. seller was very responsive…in that delivery was delayed by a day….but not a deal breaker.
UPDATE UPDATE
Well had a chance to try some flux core wire (.035) in this machine…… I was very dissapointed to find NO wire feed controls on this unit. Wire was coming out too fast, and nothing I could do to adjust. From what I have read now, the machine processor is setting the speed based upon amps and volts. Well running flux core wire….you have to run the wire very slowly….and this machine just can’t do it. In the question and answer section of the posting, UNITWeld, the seller said that wire speed IS controllable on this machine. So unless I’m missing something….and please correct me if I am, there is no wire feed controls on this welder. I will likely return the welder.

 

This review is for the newer UW-PLMIG200-1 model.

The goods:
– Welder works very well. We have tested this unit on several projects and they all turned great.
– All metal feeder mechanism.
– Standard NEMA 6-50 3 welder plug
– We also exchanges several message with support for consumables and they replied fast. They rapidly added them for sale on amazon. Search for B07QR57S4C on amazon.ca.
– Adjustable Amp / Voltage (push rotary switch)
– Feeder switch

The not so great:
– Manual is pretty bad.
– No direct feeder speed adjustment although it was never too fast or too slow. But so far it worked for what we were doing.
– No button to deactivate the feeder (useful to adjust gas). Need to open and unlatch feeder.

Overall very satisfied with the product.