Spigen EZ Fit Tempered Glass Screen Protector for Apple
Spigen EZ Fit Tempered Glass Screen Protector for Apple Watch Ultra (49mm) – 2 Pack
| Dimensions: | 4.27 x 3.53 x 1.27 cm; 30 Grams |
| Model: | AGL05556 |
| Manufacture: | Spigen |
| Dimensions: | 4.27 x 3.53 x 1.27 cm; 30 Grams |
| Origin: | China |
Very good quality
I recommend simple to install and professional. I am very pleased
Best Way to Fit Eve
This is fantastic, not cheap but worth every penny. Clear instructions, very easy to fit with the cage yiu put over the watch, result no bubbles!! i didn’t even need to use the supplied bubble removal tool very, very impresssed
Great product as always from Spige
I love Spigen products. All my screens are protected by them.
Incredibly easy to install, good quality and fits perfectly. They are not the cheapest but my favourite company for screen protectors
Brilliant Screen Protecto
Brilliant Screen Protector for my apple watch ultra, an absolute doddle to fit with the included jig, you cant even tell its on the watch once fitted and no difference whatsoever to the touch response either.
Makes fitting the screen protector easy to do first attempt. Really good finish!
It is well worth paying a little more for this system. The instructions are are easy to follow and comprehensive. If you follow them you will get a really good finish (you can hardly notice the screen protector).
I am really glad to have fitted this as it has already saved the screen from damage.
Faultless
Extremely easy install. Plastic guide ensures screen protector is fitted correctly with no bubbles. Screen is crystal clear and touch sensitivity not hindered at all. Can’t speak any highly 5*
Easy to fi
Easy to fit plus protection for screen also used spigen slim fit case
Super easy
As usual this is well designed and easy to fit. I haven’t noticed any loss is sensitivity. Slightly expensive but you get 2 in the pack. Recommend.
I should have just bought these firs
I had bought two different brands and they were either faulty or just bad.
These are the best i have spigen glass on all of our phones and ipads. Now my ultra.
But!!!
Like another poster noted the dust removal stickers DO leave marks on the screen which makes things harder.
would recommend
been using spigen for quite a while – screen protectors (not cases as those are not for me). Always easy to apply and very good quality
Perfect fit both times with low/ no hassle or bubbles
Just buy it!
I’m a fussy reviewer.
I bought a pack that included 2. It took me under 5 mins to fit each one and instructions are about 70% clear.
Likes:
– No bubbles
– Lines up perfectly
– seems strong after a few bashes against doors and a granite kitchen counter
– Touch screen works great
– feels good too (subjective, but I like a tiny bit of “grip” on the screen surface)
Dislikes:
– There is some plastic waste at the end but that’s what you get when it comes with a plastic fitting mechanism.
Apple Watch ultra
It works nicely fit perfectly but downside sometimes issue with touch response
Best eve
This is the best thing ever. Wish they made them for phones too. Straight. No bubbles
Fantastic
I normally hate having to fit screen protectors , but these spigen ones are excellent, so easy and turns out perfect.
The screen protector itself is well made and sized. It’s semi-flexible so doesn’t feel like it is made of glass – as another reviewer says, it’s probably a plastic.
Touch screen responses are affected, but very dependant on how well the screen protector fits and amount of dust underneath. Get it fitted with no dust or fibres underneath and the touch response is 95% as good as without. There is slightly more drag when swiping your finger across the screen, but barely noticeable.
There are two protectors in the pack – smart. I stuffed up the first. The second went on perfectly though. Recommended procedure:
1. Have a nice calming camomile tea. Meditate and find your happy place.
2. Put on a head torch so you are working with good light and can spot any dust on the watch before the protector is applied.
3. Unclip the watch strap on one side only so it lays flat but still gives you something to hold the watch down with later. Lay it on the supplied rubber pad.
4. Use the alcohol wipe to thoroughly clean the screen
5. Polish the screen with the supplied cloth – but be careful, this cloth seems fairly poor and can leave fibres and fluff
6. Inspect the screen thoroughly using the head torch. Repeat steps 4 & 5 as needed.
7. Fit the large dust-grabber sticker completely over the watch screen and press out any bubbles. (the small dust-grabber stickers should be binned as their edges leaves a glue residue)
Do a dry practice run of the following – then do it for real
8. Hold your breath so you don’t accidentally blow dust or fibres about
9. Peel off the ‘back’ from a screen protector, keeping it the right way up so no dust settles on the underside of the protector
10. Working quickly, remove the large dust grabbing sticker from the watch face, use the still-attached strap and large crown guard to help hold the watch down as you do it
11. Line up the screen protector and press it on to the watch in the centre
12. Breath again
13. Wait 10 seconds for the protector to make connection to the watch
14. Carefully peel the “press here” sticker off the top
15. Remove the plastic surround
16. Use the squeegee to do a first pass getting rid of the bubbles
17. Remove the top film
18. Use the squeegee again to get of any bubbles – you may need to carefully lift a corner or two with a fingernail or the supplied tool to help the bubbles escape. Be careful and patient and don’t bend the screen protector too high or it won’t sit flat again when you release it.
19. If the have an edge that seems like it won’t settle flush, carefully try to rub it and 5mm each side flat. I had a couple of raised edges which settled down with this gentle massage.
20. Admire your accomplishment. Open a beer or wine – you’ve earned it.
Very good produc
Good product and looks good with no issues with touch scree
It’s spigen nothing else needs said.
Just another quality well made product from spigen. These guys are my go to company now. All
My screen protectors and covers etc are spigen. Just a quality company.
Easy fit, easy use. Usual Spigen quality
Not my first rodeo with Spigen. Always top quality, always pleased with the product. This is not the second easy fit screen protector I’ve bought this year from Spigen, first was for my new iPhone, now for my Apple Watch ultra. The plastic casing which fits perfectly over the gadget to deliver a perfect fit of the screen protector is genius. It looks factory fitted now.
You won’t be disappointed
Great product just a little pricey
Application works flawlessly, great quality product as usual from Spigen, bit expensive maybe.
Good Overall Produc
This is a great product as are most Spigen products. It’s simple to apply because of the mounting frame so you can’t go wrong with alignment. My only gripe is trying to avoid dust particles getting in between the watch surface and the protector. I had to bin the first one and the second one was much better but there were still a few particles captured. The touch sensitivity also seems to be affected after applying this protector but it’s only minor and you just have to get used to the way you touch the screen. It’s strange that I have never had this problem with a phone screen. I think it has something to do with the big difference in screen surface area of a watch and a phone. I will leave the protector on for now and see how it goes. I don’t think you can do better than this protector though as far as watches go. I highly recommend it if you insist on using a screen protector for your watch. Ideally I would not use a protector and I would rely on the strength of the watch screen alone which is pretty good on the Ultra. I do however recommend the Spigen Thin fit cover for the phone as this protects the sides of your watch which are more likely to be bumped as you move around.
Super simple to fi
These Spigen devices are really simple to fit accurately. I’ve used their phone screen protectors and now this Apple Watch Ultra screen protector. It’s a shame there’s so much plastic waste though
Easy Installation, looks amazing 🤩
It took me only one try and it was on with no bubbles or hair on the screen. You just need to follow the instructions, that’s it. It’s barely there and not noticeable at all.
Easy and functional produc
The glass was easy to fix and the touch screen works perfectly.
Not a perfect fit , but still protects the Apple Watch ultra!
Not a perfect fit , still a slight space around the edge of the Apple Watch ultra but still protects the screen from damages and scratches
Flawless Install. Ultra Clear. Great Value.
As the title suggests I was waiting for this release on purpose. Had tried another brand from Amazon and although it did the job the adhesive had left small gaps where it hadn’t adhered to the screen correctly. The Spigen is on another level. No gaps. No dust particles or any other debris. Ultra clear. Fast and easy installation. Would definitely recommend for any doubters out there. 10/10.
What can i say its Spiege
These are excellent fit with its template that makes all the difference
Perfect hardly noticeable in use
Little pricey than some others but worth it for the jig not had issues with corners lifting personally, don’t notice it’s there tbh
Best on marke
Very easy to fit and is effortlessly perfect will buy again if ever needed
Genius
Having purchased the same setup for my iPhone I knew this was going to be the same easy/fail-safe installation.
Following instructions and correctly installing the screen protector which was straightforward and you barely notice there’s a screen protector installed. Bonus is you get another in the pack.
Comprehensive kit makes fitting a breeze - worth every penny
Spigen is not the cheapest, but you are paying for quality and consideration. The former is a given with Spigen protection, the latter comes by way of the comprehensive and idiot proof fitting kit. A rubber pad holds the watch steady for cleaning, drop the protector fitting frame onto the watch, flip over and press where marked then remove the film which releases the watch. A quick squeegee to get rid of any air bubbles (none here first go) and you’re golden. There’s even a removal tool, which is a first for me – I always use a fingernail. There’s a second protector and fitting bits as well. As you can see from the pics, not a perfect edge to edge fit but close enough. Most importantly, it’s squared and correct, no chance of going skewed with this kit. Worth every penny, wish I’d bought it first time around rather than waste time with an inferior product.