STLOVe Metal Plant Stand,2 Tier 19.3 Inch Flower Stand
STLOVe Metal Plant Stand,2 Tier 19.3 Inch Flower Stand Indoor Decor Flower Pot Shelf Black Iron Pot Stand Planter Holder for Flowerpot Home Garden Corner Porch(Pot & Plant Not Included)
| Dimensions: | 28 x 28 x 49 cm; 1.29 Kilograms |
| Batteries Required: | No |
| Dimensions: | 28 x 28 x 49 cm; 1.29 Kilograms |
| Reference: | JIAJU183 |
4 stars out of 5
This convenient and beautiful plant stand looks great in your living room or home office. This arrives assembled and is ready to use in minutes. My one minor issue with this is that, since it is so lightweight, this is not as sturdy as I was hoping. Other than that, this is a beautiful plant stand suitable for holding up to two plants.
Portavasi in metallo a due piani molto bello l’ho messo fuori dalla porta d’entrata principale . Sta benissivo,
molto soddisfatta.
Laura
Ha soddisfatto appieno le aspettative!
Molto carino, facile da montate, ottimo rapporto qualit prezzo.
Consigliato!
We love this plant stand. Although it is designed to hold 2 plants we have left the bottom spot empty as the lower shelf is so pretty.
it only took me about 5 mins to install it, and it is perfectly fit my plant pot. Now I can move my plant where I want to.
Beautiful plant stand. Very easy to setup and very sturdy.
Will buy more in the future.
I like it as it helps to organize my plant!
Accoglie 2 vasi uno pi grande sopra e uno pi contenuto sotto.
Facile da assemblare basta un’occhiata al foglietto e si procedere spediti
… ist dieser 2-stufige Metall Pflanzenstnder aus dem Hause Stolve. Sehr dekorativer Pflanzenstnder der jeden Raum oder beipielsweise die Terrasse aufwertet. Kinderleicht binnen Minuten zusammen montiert (Werkzeug ist inkludiert) Qualitt und Passgenauigkeit ist ok. Ich nutze Ihn bisher im Auenbereich und konnte bisher keinerlei Rostspuren entdecken.
Conforme l’annonce, assez facile monter, j’en suis satisfaite. j’en ai d’ailleurs command un second dans la foule
Sturdy little plant stand, suitable for a medium sized pot plant. It is easy to assemble, stands well, and is attractive to look at. Perfect for brightening up a corner with a bit of greenery inside!
Bello, elegante e funzionale da posizionare in qualsiasi angolo della casa
Prodotto robusto (nonostante le linguette nella parte inferiore non combacino alla perfezione… ma poco importa, visto che il poggiavaso raggiunge una perfetta stabilit quando le viti vengono strette con apposita chiave fornita nel pacco), di stile e soprattutto utile!
Todo segn lo previsto, buena calidad y esttica, fcil de montar, etctera. Pero una observacin sobre un dato que puede dar lugar a engao. EL DIMETRO DEL ARO SUPERIOR (EXT.) ES DE 28 CM Y NO DE 46 CM (como aparece en la segunda foto). Sera bueno que lo corrigiera
Nice little plant stand, you need your own tools to tighten this up but does the job.
Goes together easily with minimal fuss. Just a few finger twisting bolts.
Stands well and as long as you put a pot on the bottom to counterbalance its quite sturdy.
Overall I can recomend
This plant stand is easy to assemble and the finished height is perfect. Very well made and fits my outdoor planter well. Very happy with this plant stand and I would definitely recommend it.
Es un soporte para dos plantas, una grandota ariba y abajo una un poco ms pequea.
Se ve muy bonito, me gusto el diseo.
Es super fcil de montar y incluye todo lo necesario para ello.
Se ve resistente y de buena calidad, adems el precio no esta mal.
Der Pflanzenstnder wird zerlegt geliefert und muss vor dem Gebrauch entsprechend zusammengebaut werden. Die Montage ist aber kinderleicht und sollte fr niemanden ein Problem darstellen.
Es mssen lediglich Schrauben mit Flgelmuttern angebracht werden. Hierzu liegt sogar der passende Inbusschlssel bei, so dass man kein Werkzeug zu Hause haben muss.
Die Montageanleitung ist einfach und gut verstndlich gestaltet, so dass in wenigen Minuten der Zusammenbau erledigt ist.
Aufbaut ist der Pflanzenstnder knapp 50cm hoch. Es lassen sich darin Blumentpfe mit einem Durchmesser von 45cm problemlos unterbringen.
Das Design der gebogenen Stahlstangen ist sehr gut gelungen. Erfreulicherweise lagen nach dem Aufbau alle Fe des Stnder plan auf dem Boden auf und nichts war schief.
Die Stangen sind optimal lackiert und es waren keine nennenswerten Mngel zu erkennen. Man muss hier natrlich auch den gnstigen Anschaffungspreis im Auge behalten und darf die Erwartungen nicht zu hochstecken.
Aus meiner Sicht ein wertiger und optisch sehr geflliger Pflanzenstnder zum fairen Preis.
I love this, it’s super cute and dainty, and it’s perfect for plants, or snacks, or whatever you want to put on it. It’s smaller than my nightstand, so I like to put small plants on it, or my snacks when I’m not eating them. It’s really lightweight too, and sturdy which is perfect. It’s cute too, because it has a little flower on the top. Highly recommend if you’re looking for a new plant stand.
Really nice Looking, quite easy to assemble plant pit stand. Makes great addition to any room and you can even place 2 plants on it.
C’est vraiment parfait qualits !Le taille est bien pour deux fleur, je suis trs satisfait pour ce produit, merci !
This plant stand was really easy to put together. The assembly was straightforward and the instructions were good. Once built, it’s quite sturdy and doesn’t wobble. It looks quite attractive and holds my plants very securely. I have placed a fairly large, heavy plant onto the top shelf and it is very sturdy. I like that the plant stand itself is very subdued – it lets the plants be the star of the show. This plant stand is exactly as described and I’m very pleased with it.
A lovely, elegant piece for displaying plants.
It has two tiers, with the lower tier sitting close to the ground. This tier is fine to be left empty. It looks fine like this, but also keeps it’s balance and doesn’t get top heavy.
The curls at the bottom don’t have stops, and with it being self essembly the connectors do show and spoil the look slightly.
– The stand is sturdy enough to hold some weight. It’s put together via bolt and wingnuts. The bolt head needs an allen key to tighten but I didn’t see it come in the package. But you can still tighten the bolt with the wingnuts without the need for an allen key as I did. However, gloves are needed when tightening the nuts as my fingers are all black due to the coating of the product.
I am really enjoying this plant stand and it has allowed me to put MORE plants near the window. I live in a place with short days in the winter so all of the plants get relocated for the cold months. It can get a little hectic so having stands to put plants on different levels is very handy.
The stand is fairly light. I wouldn’t expect it to blow over in the wind but I WOULD suggest that you put the heaviest plant you can find on the bottom shelf. Don’t overload the top or it could get pretty easy to tip over if it gets bumped.
The finish is nice glossy black and looks like it will stand up to getting wet or misted. The stand was easy to assemble in under 5 minutes. The hardware left a black film on my fingers but it washed off easily with soap and water.
This small plant stand was relatively easy to build, though the nuts weren’t completely smooth, which made tightening them uncomfortable on my hands. It measures 19.6 inches tall and has a width of 14 inches, making it small enough to fit most spaces, though I would have preferred if it had been a handful of inches taller to discourage my curious cat.
The upper shelf has a 10.5-inch circumference, and the lower level has a circumference of 9.6 inches. Both are big enough to hold most standard houseplants. Although the stand is lightweight, placing too much weight on the top shelf could increase the likelihood of knocking it over. Also, the metal feet aren’t padded. Depending on your flooring, adding a few thin pads is advisable. Overall it’s a nice, reasonably-priced plant stand.
Positives
– Looks good
– Reasonably priced
– Can hold most average-sized houseplants
– It doesn’t take up much space
Negatives
– Hardware had coating
– It’s fairly short
– Lightweight enough that it could become top-heavy
– Unpadded legs could damage floors
Bellissimo complemento d’arredo, robusto, facile da montare e resistente, facile anche da spostare se si necessita di fare le pulizie, sto aspettando che riasortiscano gli altri colori perch vorrei acquistarne altri
Estupendo ha quedado este soporte de metal para dos macetas, lo he colocado en una esquina del saln con un buen resultado esttico y aprovechando el espacio. Se monta en 10 minutos y es muy fcil, solo hay tuercas y las patas y bases, por tanto es muy intuitivo. Los materiales son extra resistentes y a la vez ligeros, el diseo es bastante atractivo y en la linea de casi cualquier decoracin. Las macetas lucen muy bonitas puestas.
It is a nice support with 2 heights, easy to assemble and solid. It rests solidly on its 3 feet. The price of this stand is comparable to others on the market so you will choose it for its design and color according to your interior decor. For me, that’s what I needed.
This 2-tier metal flower stand came exactly as shown on Amazon. The elegant curvy design is absolutely beautiful. It is extremely easy to assemble and yet very sturdy. The height of the shelf is also perfect for holding small or big planters. I have placed mine at the corner of the dinning room and it looks really nice. Great product and highly recommend !
Easy to assemble, took me about 10 minutes to do it.
Perfect for plant lovers because every plant enthusiast needs more spots for their plants. This stand can go anywhere and will blend in any dcor.
I had a good laugh at the translation in the instructions; those always make me laugh, I had to share this one with you.
A very nice plant stand. It was easy to assemble and took me about 15 minutes, its robust and my plants fitted great.
It now means l can buy a few more plants as l have freed up a bit more space, (and you can never have too many plants)
A good solid lightweight stand at a reasonable price, very happy with the product.
This has to be assembled yourselves. It is quite light so didn’t think it would be that strong or sturdy but it’s actually good. It’s sturdy and flat, doesn’t rock.
Useful to put 2 plants in one space on the floor so it’s a space saver. Looks quite nice. Pleasantly surprised. Big plant on the top and smallish on the bottom, one that isn’t going to grow tall is the best setup.
Good day all this plant stand was easy to assemble and its very Sturdy which this is made from metal which I plan on giving to my mom because she’s into plants as this is Most definitely going to make her day and glad it is with a 5 star product and with that said THANK YOU SO MUCH FOR TAKING THE TIME TO READ MY REVIEW AND HOPE YOU HAVE A WONDERFUL DAY OR A GREAT NIGHT
Als begeisterte Pflanzenmama haben sich ber die Jahre viele Zimmerpflanzen angesammelt, die alle ein passendes Pltzchen brauchen. Den Pflanzenstnder von STLOVe, der aus schwarz lackiertem Metall besteht, empfinde ich als optisch sehr ansprechend. Er gleicht 1:1 den in der Artikelbeschreibung befindlichen Fotos, wirkt nicht nur sehr dekorativ, sondern hinterlsst auch einen stabilen Eindruck. Produziert wird er lt. Produktkartonage in China. In dieser finden sich die einzelnen Teile, nebst Schrauben, Inbusschlssel und einem Info-Blatt, welches als Anleitung zum Zusammenbauen dient, wieder.
Die Verarbeitung ist als gut zu werten, ein paar kleinere Makel lassen sich an den geschweiten Stellen entdecken, die insgesamt noch etwas sauberer gearbeitet werden knnten. Nach der Montage, die recht schnell vonstatten geht, fllt dies aber nicht weiter auf. Der Pflanzenstnder besitzt einen sicheren Stand. Die Mae sind in der Artikelbeschreibung wie folgt hinterlegt: 49cm x 46cm x 25,5cm, sowie 35cm. Das Nachmessen ergibt 49,4cm x 28cm x 26cm, sowie 35cm. Alles in allem ein schner, wenn auch nicht ganz perfekter Pflanzenstnder, der mit kleinem Punktabzug immer noch 4 Sterne verdient!
Der Zusammenbau verlief reibungslos! Wir hatten keine Probleme. Es ist etwas leichter als ich erwartet hatte, aber wenn es zusammengebaut ist, sitzt es eben. Dies war eine willkommene Abwechslung zu frheren Pflanzern, die nicht eben waren. Sie mssen dieses Pflanzgef aufgrund seines langen, schmalen Aussehens unbedingt mit Bedacht einsetzen. Wenn Sie den oberen Korb mehr wiegen als den unteren Korb, werden Sie Probleme mit dem Umkippen haben. Vermeiden Sie das. Es braucht nicht viel Wissenschaft. Der weie Stnder hebt meine schnen grnen Pflanzen noch mehr hervor, was ich liebe. Ich bin berhaupt nicht sauer auf diese Position!
Llevo solamente un ao y medio viviendo en mi comunidad de vecinos y desde el primer da yo puse dos plantas que me haban regalado mi hija mediana y mi hijo mayor, en el rellano, junto a varias plantas que tenia puestas mi vecina. La cosa es que este ao mi hija pequea me ha regalado otra planta, y quera ponerla sin necesidad de restarle ms espacio a mi vecina, pues aunque el rellano es de todos, me da apuro, ya que sus plantas llevan ah mas tiempo.
Solucin que se me ocurri, comprar este soporte, y la verdad es que ha sido un gran acierto. De esta forma tengo 2 plantas en diferentes alturas, ocupando el mismo espacio que ocupaba una sola estando en el suelo.
El soporte es muy bonito, es tipo forja, con dibujos de flores en las partes de las bases, y la verdad es que queda bastante resultn en el rellano .
Est fabricado completamente en metal, y aunque es bastante ligero, se siente muy resistente. Los acabados estn impecables, todas las piezas estn perfectamente pulidas y redondeadas, sin bordes ni rebabas. El trabajo de pintura es tambin muy bueno, todo uniforme, en color negro con algo de brillo.
Tiene un tamao bastante compacto, muy prctico para ponerlo en cualquier rinconcito. La altura del soporte es de 49 cm, el dimetro interior superior es de 26 cm, el dimetro interior inferior es de 23 cm, y el grosor de las patas es de 0,8 cm, aproximadamente.
Aunque la forma ms comn y que a m personalmente ms me gusta, es poner la base ms grande arriba y la pequea abajo, es posible ponerlas al revs sin problema alguno.
El montaje es lo ms sencillo del mundo, nicamente hay que unir bases y patas con los tornillos ya incluidos. Adems, no necesitaremos herramienta alguna, ya que tambin se incluye una llave Allen para poder apretarlos bien.
En cuanto a la calidad/precio, en este caso creo que ambos estn perfectamente acordes. La calidad es muy buena y el precio es igual o incluso ms econmico que el de otros soportes similares.
A mi personalmente me ha gustado un montn, y no descarto comprar otro igual para poder colocar la flor de Pascua que me regala mi madre todos los aos en estas fechas. Es por esto que puedo decir que es un artculo que recomiendo.
Espero que mi experiencia y opinin os sea til .
Lovely flower stand! Looks Beautiful and neat. Doesn’t take a lot of space but can put quite a lot. If it’s bigger pots I managed to fit two, but if it’s small ones ( like orchard pots) I managed to fit 6 ( 3 on the bottom and 3 on the top).
Feels sturdy and strong. Holds all pots very well.
Easy to put together, very light and good price
This is a beautiful plant stand very sturdy easy to assemble it has a spot for a smaller plant on the bottom and a bigger one on top. It’s made of great quality material would recommend for any plant lovers
This is a really pretty looking plant stand and assembly was really easy. There are a few minor details though that could be fixed.
-It comes well packaged to keep it scratch free but the legs are wrapped in some kind of cling wrap and was a real pain to unwrap.
-Each of the legs had a little spot underneath that’s missing the black coating, however it’s only visible when the stand is upside down.
-The bolts and nuts have some kind of coating on them that will make your fingers turn black and the wing nuts are visible when the stand is assembled; you can angle some to be invisible but not all.
-The bottom of the legs are open metal tubes and don’t have covers over the ends. I’m very klutzy and have a tendency to spill things so I’m going to get black plastic caps to cover the openings to keep stuff from getting in the legs.
All of the above are minor flaws and overall this is a very pretty and good plant stand with a low profile. I found assembly was a lot easier doing it upside down and hand tightening then wing nuts, then using the included tool to do a final tighten and get the wing nuts placed in the least visible manner. You may have trouble finding the tool, if you do just turn the box upside down and it will fall out. Really pleased with this stand.
Me encant desde que lo vi y cuando llego a casa mas
una de mis aficiones son las plantas de navidad, me encanta dar color a la casa con las plantas y mas si son coloridas en fechas de invierno , pero estas plantas son de interior y hay que cuidarlas del fro y de los cambios de temperatura
Es un soporte metlico de dos alturas y metlico, el cual me es cmodo de mover, y aguanta el peso de las dos plantas de una manera estable sin estar preocupada si se va a mover o quedar cojo.
Color negro para hacer mas clida la estancia sin necesidad de estar haciendo combinaciones de colores o estilos
Viene desmontada y con las instrucciones es super sencillo montarla en un momento , no es preciso tener una experiencia muy muy experto para hacerlo de manera rpida y sencilla
Putting it together was so easy; literally took a minute. The metal frame material is very good; it sits solidly and steady. You can put quite a heavy pot on it, but just be careful don’t make it too top-heavy or else it’ll be easy to topple over if you accidentally bump into it (like I did). Given that the feet are bare metal, it’s also easy to slide (and I worry about scratching my hardwood floor), so I wrapped a small piece of anti-slip rubber to keep it in place more securely.
Nicely packaged and straight forward assembly with durable quality craftsmanship and a sturdy finish, also perfectly balanced, even on carpet.
Blends in well with home decor and is reasonably lightweight. Absolutely no issues with this one whatsoever as its been a few weeks and has definitely added volume to my living room and its surprising where you can use it and what you can add aswell.
Happy to recommend all in all.
These are very easy to assemble. My 11 year old was able to put it together in under 10minutes. It is quite sturdy when built and is quite lightweight. It’s not very tall ( see pic for height) so double check the measurements.
Well made plant stand. Fits a smaller plant at the bottom and a bigger one at the top. Love the design. This was very easy to put together and came with all necessary pieces. It’s a little bit on the shorter side, so just keep that in mind. Overall, I really like it.
This little plant stand is pretty nice. The 3 legs make it easy to place it without wobbling. Even if the floor is uneven.
Assembly is easy. Although I think it would be easier if there were regular nuts, instead of wing nuts.
The plant stand is made with hollow tube, and seems sturdy enough for most plants.
This unit is currently priced at $37.99. Each piece of the stand was individually wrapped in plastic and I did not see any scratches in the paint finish on any of the pieces. One end of tubing on one of the legs was a bit flattened out-of-shape, but that was the only defect I could see in the whole plant stand. As a very minor detail, I would have liked if the ends of the legs were capped instead of being open tubes just so that the product has a completely finished look.
The plant stand was very straight-forward to assemble and stood nice and level when put together. Holes for the screws lined up well, and there was only one of the connections that was slightly misaligned once everything was tightened.
I could not find information on the box, on the instruction sheet or within the online product description as to what is the maximum weight capacity of each shelf. At the moment, we have fairly light pots on each tier (each being just 1.6 kg/3.6 lbs) and the shelves feel quite sturdy. I cannot comment on how well the stand fares outdoors, since we intended to use ours indoors. It is simply, but well-designed and serves its intended function.
Sono soddisfatto di questo prodotto. Cercavo un’alzatina per il mio terrazzo e questa perfetta! Facile da montare e robusta.
Great price for value at time of review
Thing is solid and honestly looks pretty fantastic,
I’d say the pictured ceramic pot and plant weighs about 30pnds/15kilo.
The assembly was somehow both easier and more difficult then I expected.
But they kept it simple just some screws and butterfly nuts and took less then 5 minutes to get out of the box and assemble
We have dogs and kids so it being double secured at the top and solid on its feet is also appreciated
I hope this was helpful
Questo porta molto carino. Mi serviva per arredare casa e mi piaciuto questo in metallo.
Happy with the appearance and quality, sturdy and stylish – easy to assemble.
It is well built, holds a lot, sections deep and secure, is suitable for a large house plant and is easy to move around.
Overall Attractive, modern-looking and functional, not bad priced.
I have lot of small indoor plants and I’m out of place for any more of them. Being able to stack them one over the other has opened up lot of space now. Stand is light weight, but very strong.
This plant stand arrives flat packed in a solid cardboard box.
The parts, screws, nuts and an Allen key are supplied. It was quick to assemble.
The welding is poor in some places as shown on the photo. As the plant stand will be stationary it probably will not matter much, and the large plant hides it.
It is of a good height to get medium and large plants off floor level without being too high up.
A two tier plant stand in a quasi-Victorian faux wrought iron – the metal is in fact hollow, which does make it easier to assemble and I guess cheaper to deliver, but there’s nothing inherently good about a lightweight plant stand – they were made of heavy materials partly to stop them being knocked over by the wind. However, once it’s asssembled (Nine bolts, included Allen key), it’s a sturdy and good looking stand, which does look more expensive than the actual price.
Oh this is so well made, brilliant quality stand.
The attention to detail is divine.
It was super easy to put up and now looks a treat in my living room.
It holds my plant pots very well, I cannot fault it at all.
It looks superb, highly recommend for both the price and the quality!
This is definitely a ‘sum of it parts’ thing, doesn’t look much when you get all the parts out of the box but once this plant stand is assembled it is as sturdy as they get.
Very simple to assemble, all the required tools are in the box. Looks just as good indoors or out and being made of a painted wrought iron, it may rust eventually if outdoors but should last a good number of years before the paint work degrades. Quite a beautiful looking piece that fits 2 good sized pot plants. We will be using it outdoors at our front door once the weather and time of year are more agreeable to plant growth. Lovely.
A really lovely, light, decorative plant stand: much nicer (and cheaper!) than anything I’ve seen in local garden centres. It took The Resident Warlock less than five minutes to put together and he didn’t swear once, so it must have been very easy. Now I only have to decide where to put it!
This plant stand is SO easy to assemble and looks lovely! It is good quality, sturdy and can hold two plants or whatever you chose to put on it. Would look lovely with fairy lights! The price seems right to me and it would make a lovely gift too.
This planter is fab. It is easy to put together with clear instructions. The result is a great plant stand for indoor or outdoor use. I have put mine in the garden to showcase a couple of nice pots I have. Looks great and I am very pleased.
Ich muss zugeben, dass ich am Anfang etwas skeptisch war, ob der Stnder zusammengebaut auch wirklich stabil ist. Aber ich bin begeistert 🙂
Der Stnder kommt in Einzelteilen in einem kleinen Karton an. Mit dabei sind die passenden Schrauben, Muttern, der passende Imbusschlssel und ein Maulschlssel (Wozu dieser ist, wei ich jedoch nicht). Als Ersatzteile waren eine Schraube und 2 Muttern noch mit dabei, die unterschiedliche Menge war vermutlich ausersehen.
Der Stnder ist wirklich schnell zusammengebaut und das drfte auch jeder allein hinbekommen. Wichtig ist hierbei, dass man am Anfang alle Schrauben erst noch etwas locker lsst, damit man alles passend zusammenbekommt. Spter kann man dann alle Schrauben ordentlich festziehen, damit der Stnder auch wirklich stabil steht.
Wir gefllt das schlichte Design wirklich sehr gut und die Pflanze kommt schn zur Geltung. Natrlich kann man fr den Preis nicht extrem hohe Qualitt erwarten. Aber das Preis-Leistungs-Verhltnis passt. Von mir deswegen eine absolute Kaufempfehlung.
Manque de place pour mes plantes…. Ce super est vraiment trs joli et pratique. Suffisamment grand pour mettre une plante dessous.
Le montage est trs simple grce la notice fournie.
Je recommande
This 2 tier metal plant stand is lightweight and it folds very quickly, it took me literally a few minutes and I immediately put my two flowers there, it looks really elegant.
It is perfect decoration for any room for sure.
Made of high-strength iron, install smooth,very solid and sturdy.
You can place it where you need it, doesn’t take up too much space.
The plant stand height of the plant is 19.3 inches (49cm).
Upper inner diameter 10.4 inches (26cm)
Inner diameter of the second layer 9.1inch (23cm)
What you will get in this package:
1x 2Tier Metal plant stands
9x Screw
1x Allen wrench
Very elegant metal plant stand for really reasonable price I have to admit.
Good quality product, that’s why I can highly recommend it to anyone.
This metal plant stand is a reasonable size and will hold two plants or use the top for a plant and place other things on the base shelf.
It screws together with the supplied bolts and wing nuts. It is very stable.
Nicely finish in black, it is a great addition to my garden.
This is a brilliant plant stand. Very easy to assemble and it looks lovely. Excellent quality. Highly recommend!
Came in a relatively small, thin box but was assembled in less than 10 mins with the supplied wing nuts.
Looks great and can hold a decent weight. The plant and pot were using is heavy.
See the pic for a handy hint on size of the thing. Definitely recommended if you’re after a plant stand.
This is a very attractive and quite sturdy metal plant stand. It’s supplied flat packed but takes only minutes to assemble. There’s an Allen key supplied to tighten up the bolts, though you can do a reasonable job by hand with the supplied wing nuts.
It’s very sturdy once put together. I wouldn’t put immense weight on it seeing as the weight rests on little metal tabs which are only welded on, but for a few pot plants it’s fine. Often metal stands like this don’t quite sit level and rock about, but this is perfectly flat and level which is nice.
The two tiers allow for two displays to be created. I’m also thinking about putting a small artificial Christmas tree on the top to display in the conservatory. A nice and very easy to assemble stand.
STLOVe Metal 2 tier Plant Stand: This comes in multiple parts, but does fit together easily and sturdily. It’s accompanied by a single sheet of instructions, picture images mostly but actually it’s quite self-explanatory. Hardware is provided along with an Alan-key wrench, word of warning – this is loose in the parts bag rather than sealed in with the hardware – mine slipped out and I thought I’d not received it. The butterfly nuts go on smoothly and tighten well.
The stand itself is made of black coated metal tubing which is light and therefore easy to manoeuvre. Once it’s completed the stand looks good and both tiers can take a sizeable pot and bare the weight. It’s not a particularly contemporary style but I like it and it looks good in my hallway enabling both plants to “shine” and access light. It’s reasonably priced for the quality and build at around 20 and I’d expect it to last well.
Really beautiful plant stand! The quality is a lot better than I expected and although it is made out of good quality metal it is still very lightweight. Is so beautiful and will be a nice accent that highlights certain parts of the room. Super easy to clean and dust because the coating is impeccable and very even. Very well done and can only recommend
I like this metal stand for flower pots. It is easy to assemble. All the pieces fix as promptly . It is a sturdy , banaces and durable stand . This decoration piece is pretty . I am happy that it is made out of iron there is very less chance of break down . In case it fell down , that’s why I like it and I will definitely recommend it .
Der Hocker wird mit Inbusschrauben und Flgelmuttern montiert. Es wird ein passender Inbusschlssel mitgeliefert, der aber nicht in der Schraubentte liegt, sondern in der groen Plastiktte gesucht werden muss, die um die Einzelteile gestlpt ist.
Schrauben und Muttern liegen vollzhlig bei. Die Montage ist relativ einfach, nur die Flgelmuttern sind etwas scharfkantig.
Der Hocker weist keine Beschdigungen auf der Oberflche auf und wirkt gut verarbeitet. Die Ablage oben hat einen Durchmesser von 26cm und die unten bringt es auf einen Durchmesser von knapp 24cm. Die Gesamthhe des Hockers betrgt 50cm.
Der Preis von momentan 25,99 ist fr die gebotene Qualitt absolut fair. Optisch gibt es an dem Hocker auch nichts auszusetzen. Deswegen kann ich hier berzeugt die vollen 5 Sterne vergeben.
Ordered this for my partner who is increasingly into houseplants. She found it quick and easy to assemble (in not more than five minutes or so, even with the ‘help’ of our four year-old), and quite sturdy when put together; certainly more than strong enough to hold a couple of plant pots and compact enough that it should fit in most niches and corners. The platform surfaces are wirework and so not solid, so it would not necessarily suit everything, but it would obviously be possible to stand other things on it than just plants.
One thing to note is that the space ‘inside’ the stand, for anything on the bottom platform, is of course limited by the platform above it; for plants this would mean that the lower one would need to be quite small in order to fit in with its pot, so larger plants would have to go on the top. There is a railing around the top platform for extra security but none around the lower, so getting things in and out is not overly impeded.
My partner mentioned as well that due to the wire construction it would be quite easy to wrap tinsel and other decorations around the stand, weaving through the bars of the legs and so forth, which would be a bonus for festive occasions. Overall she is very happy with it, particularly at the listed price.
An absolutely lovely plant stand. This will look good in any room to be fair. You can fit two plants on this and it’s super stylish. Also very reasonably priced. You could even use as a mini coffee table, should you so choose.
So why not five stars? Weirdly, it’s quite fiddly to put together. It does come with clear instructions and the right kit, but I do have arthritis in my hands and at times, I did struggle with the fiddly nuts and bolts.
Overall though, a stylish addition to your home- recommended
Plant Stand
The plant stand frame is made from hollow tubing, so the weight is light. Finished in gloss black paint, it stands 50cm in height. The bottom shelf to the top shelf is 36cm.
The frame comes in 5 parts and is held together by bolts and wing nuts, assembly is straightforward, and you could set it up without referring to the instruction sheet. An allen key is provided so that you do not need other tools. It takes approximately 8 mins to assemble if you take your time.
It is an elegant-looking stand with the frame tastefully scrolled. The contrast of the black frame against the green leaves looks particularly nice though any potted plants that fit should be fine.
It is recommended to tighten the nuts after the stand has been fully assembled; however, it was already steady on the floor without any adjustment. The stand is sturdy and holds the weight of the potted plant pots I put on it.
I like the stand; it adds a nice touch to the house. I am happy to recommend this plant stand for its elegant design, sturdiness, and price.