Cooler came in 2 days.

I kept the thermal paste that came on it, easy install! If you’re not sure there’s great YouTube videos.

I had never bothered using anything else but the wraith cooler than came with my r5 3600. But when i tried Hunter: call of the wild the other day, temps were 80s to low 90. I wasn’t a fan of that.

So bought this cooler, and Holy crap. I tried it again and also with benchmark apps and the highest temp i got was 65.

Super happy with this.

I have not used DeepCool products before, but I was doing a budget build for a friend and thought I’d give this one a go. I have to say I was impressed by the build quality of this cooler, the ease of installation, and the performance. Not to mention, it looks great!

I had no problems with the product, followed the installation instructions and it installed with no issues. It is wisper quiet, one of the better cooling system fans I have installed over pass 40 years.

Kind of chunky, especially in a mini-itx board but this thing works great!

Even under load, my i5-12600k does not go above 45c

Come with thermal paste already applied on the cooler, I didn’t add any just popped this thing right on.

Would buy agai

Went from a Wraith Stealth cooler that came with R5 5600x and bought this. My gaming temps prior we’re maxing out at 82 degrees and quite often. Now, I rarely see 60 degrees. For the price I paid, absolutely worth it.

Used with Ryzen 7 5700XT and 3 chassis fans; haven’t had a single issue with performance. The unit is quiet and looks really good. No issues with install or the thermal paste that comes applied stock. Great value.

Le bajo 10 grados de temperatura al enfriamiento de stock. Recomendable.

Attenzione alle schede madri itx !!!!! Questo dissipatore ha un grave problema !!! Il plate che ha davanti al processore va incontro al dissipatore dei vrm , quindi si ha dei grossi problemi nel montaggio . In particolare , per poterlo montare , abbiamo dovuto tagliare una parte di circa 2mm per riuscire a montarlo . A voi le foto . La schedamadre in questione e una x570 Asus rog strix i-gaming itx . Di per se il prodotto molto valido e offre buona performance, ma cazzarola non si pu spacciare per compatibile con tutto , quando si hanno dei problemi cos .

I’ve never left a review before, but this cooler made me unbelievably happy and satisfied. My AMD stock cooler I had on before this was definitely not sufficient to say the least. Some games I would see my cpu get as high as 87, and always hovered around 76-77c. I returned a cooler previously because it didn’t work with my system, and was absolutely miserable to install. I’m not a pro with computers but I’m good at the basics of everything, this cooler took minutes to install, and even in the most intense games I’ve yet to see it get passed 65c. I’m genuinely impressed, and for only being $35? I would by this again with 0 questions asked

Per soli 40, un affare! Il mio processore non supera i 50/57 gradi in full load.

This is what you would call a cooler from hell. Blows water cooling out of the window.
It is very very quiet considering the size of it. So definitely check the size of your case before buying.

Exceptional cooling. I have it slapped on a 5800x3D, which is known to run hot. It’s kept my CPU well within my desired operating temps without making a tonne of noise. Exceptional performance and value.

I installed the AK400 in my Zalman S2 case after watching a few installation videos. I’m using an AMD-based micro-atx motherboard. The spacers for the motherboard I would say were the weakest link. If you watch videos on youtube, they are the orange plastic pieces that go over the backplate holes on the motherboard. The spacers do not secure themselves on the motherboard, as they don’t seem to have any threading at all. They just set the screws at the right height so they thread the backplate properly. The problem with the spacers is that because they aren’t threaded, they easily wobble around. I had one pop out while I was trying to tighten a different screw down, and then I had to take time to slip it back in. Other than that, the installation is pretty easy.

A couple words of caution- pay attention to how much maximum cooler height your case says you have. My case says it has 156mm of room. The AK400 says it takes up 155mm. I used up all 155mm of that space. Also, it’s obviously easier to install this when the motherboard is not in your case yet. I had a little trouble getting the fan clipped on because my motherboard was already in the case, but it worked out.

I will say, compared to the wraith stealth cooler I had (stock cooler), my cpu is running 15 to 20*C cooler now (Ryzen 5 3600) under stress tests. Definitely worth it.

This is a full review of the item from my expertise, good value for money, not to bad but you can buy it cheaper elsewhere, easy mounting system and even comes with a screwdriver for mounting everything, sound quite quiet, performance debatable, for test reference this cooler was tested on an AMD ryzen 7 5700G 8core with 16mb catche, heat out put is worked out differently to rated tdp, rated tdp is 65w acuall tdp is 71w packages 45w-65w processor real rating over 100w, first up my old CPU cooler for comparison the old cooler was a deepcool cooler was designed for an am3 socket had 4 heat pipes with copper exposed at the base plate, and rated for a 65wtdp 6core fx processor, idle temps where high as expected at a steady 52c
At gaming load on a number of games temps where at average 62-65c at full load tested with cinebench was 69.7c and did not thermal throttle, I was very surprised how well it did considering, it was the wrong design in the first place it also didnt thermal throttle, next up the ak620, I would like to note first I love the design of the 620 with the duel fan configuration which helps with cooling and the simple fitment design, downside not a copper base plate no direct copper piping contact with the CPU, design could have been better here, the metal fins feels stong probably made from steel, so I fitted the ak620 which was a very easy process, on idle temps there where noticeably a big difference dropping by over 10c with processor temps at around 35c, I thought not bad, then we came to the gaming tests all the same games used as before, average temps where about 54-56c which seemed like a big difference again by about 10c but then came the let down at full load using cinebench of course at max load max temps hit a steady 64.9c I tested this multiple times checked mounting pressures and still had the same result 64.9c now don’t get me wrong this is a 5c drop from the old cooler but only 5c did feel to short, especially since this cooler is rated for a 250w tdp, has 6 heat pipes and two fans for cooling, so I upped the ain’t and put on some noctua fans but even then only dropped a further .4c to 64.5c, I think this is due to the fact there is no direct contact with the heat pipes which slows the heat transfer to the heat pipes them selves,
Overall perfectly useable with a CPU with an output of 150w definitely would not advise using it on a 250w cpu where other coolers definitely have better cooling capabilities, value very very good value indeed I cannot stress that enough.
Finally grade test
Performance, b+ closer to an A
Value for money A+
Noise A
Mounting system A

Ryzen 5600X never goes above 65C even when playing games like metro exodus enhanced edition.

At the beginning, I would like to point out that this review is not sponsored by Deepcool.

Review updated.
In short – the AK620 I purchased on Amazon cooled the Ryzen 5 3600XT CPU not much better than the Wraith Spire.

I was contacted by DEEPCOOL Customer Service and they offered to replace the AK620. I got my new cooler a few days later. At last everything works as expected from an efficient cooler. The temperature at IDLE is 30-32C, 60-65C while gaming and 70-72C at full load and is much quieter than the Wraith Spire and Wraith Prism. Installation is easy and AK620 does not conflict with RAM (I use “regular” low profile RAM modules).

After examining the previous cooler, I noticed that the copper base was worn in the middle part due to the convexity of base, which was causing the base to not fit the CPU properly.

Now I can honestly recommend the AK620 to anyone looking for a good CPU cooler. Deepcool has proved that a good brand is not only about products, but also, and maybe most of all, about customer service.
I would like to thank Jeny and all customer service staff for very good communication and quick replacement.