Kärcher FJ6 Foam Nozzle – Pressure Washer Accessory
Kärcher FJ6 Foam Nozzle – Pressure Washer Accessory
| Weight: | 201 g |
| Dimensions: | 9.3 x 20.1 x 18.4 cm; 201.28 Grams |
| Brand: | Kärcher |
| Model: | 26431470 |
| Batteries Included: | 1 Unknown batteries required. |
| Manufacture: | Kärcher |
| Dimensions: | 9.3 x 20.1 x 18.4 cm; 201.28 Grams |
This product is great. It does what it says on the tin. I was confident in using it based on the description. I think there are some areas can be improved but it’s too early to tell yet. It’s well made, and will look forward to using in continously.
I got way too excited by this item delivery. Washed car immediately. Bit tight in connector but got there in the end. Definetly made foam! Turning the dial wasn’t as impressive as I hoped as dibbling occurred- but it stops higher the foam level.
This does the job when using snow foam as part of a car cleaning process, but its very expensive for what is a plastic bottle essentially. The dial also doesn’t really vary the output much – on the lowest or the highest setting, it just about does a car.
Good attachment, which I use whenever I use the pressure washer to clean the car. I have used quite a few different products, including Auto Glym & Merguiars foam and I was expecting it to be thicker and stick to the car for longer – based on videos I had seen online. By the time I have finished doing the whole car, most of it has like dripped off.
For best results for me car, a manual wash always comes out the best.
Its also worth noting that I never let me car get filthy, I clean it very regularly so perhaps if there was more dirt for it to stick to I might get the results I was expecting.
Just what was needed for my Karcher pressure washer. Ideal for snow foaming. Easily controls the amount of detergent ejected from the end, makes a great load of white foam to spray over everything
I am not a valeter and so am not up to speed with foam guns but this thing does what I want. Chucks the suds on the car. The flow can be adjusted with the dial thing on the top, get the right consistency, give the car a good coating then get to work. I have a large SUV and find that one full spray container easily does the whole lot with a little left over for the wheels/arches.
Purchased this for washing the car along side some polar products. Makes things so much easier for washing the cars, and was easy to attach to my 2014 Karcher nozzle. So yes, to those asking, it does work on older Karchers.
I recently purchased the Krcher FJ6 Foam Nozzle as an accessory for my pressure washer, and I must say, I am thoroughly impressed with its performance. The foam nozzle has quickly become an essential tool in my car washing routine.
Foam Generation:
The foam generation capability of the Krcher FJ6 Foam Nozzle is outstanding. It consistently produces thick, dense foam that clings to the surface of the vehicle. This is crucial for effective cleaning, as the foam softens and lifts dirt, grime, and contaminants, making them easier to remove. The adjustable dial on the nozzle allows me to control the foam concentration, enabling me to customize the foam thickness according to the level of cleaning required.
Ease of Use:
Using the Krcher FJ6 Foam Nozzle is a breeze. It connects easily to my pressure washer, and the instructions provided were clear and straightforward. The nozzle feels well-built and durable, giving me confidence in its longevity. The bottle that comes with the nozzle has a generous capacity, so I can cover my entire vehicle without needing frequent refills.
Versatility:
While I primarily use the foam nozzle for washing my car, it’s worth noting that it can be used for various cleaning tasks. I’ve used it to clean outdoor furniture, windows, and even my driveway. The adjustable foam concentration makes it versatile for different surfaces and levels of dirt.
Cleaning Efficiency:
The foam generated by the FJ6 Foam Nozzle ensures thorough coverage and dwell time, which results in more effective cleaning. I’ve noticed that after using the foam nozzle, there’s a significant reduction in the need for scrubbing or manual agitation. This not only saves time and effort but also reduces the chances of introducing swirl marks to the vehicle’s paint.
Price Point:
Considering the quality of foam and the convenience it adds to the cleaning process, the Krcher FJ6 Foam Nozzle is reasonably priced. It’s an investment that pays off in terms of the time saved and the superior cleaning results achieved.
In conclusion, the Krcher FJ6 Foam Nozzle is a fantastic accessory for anyone who owns a pressure washer and is serious about maintaining their vehicles or cleaning various surfaces. Its foam generation capability, ease of use, and versatility make it an indispensable tool in my cleaning arsenal. I highly recommend the Krcher FJ6 Foam Nozzle to anyone looking to elevate their cleaning game.
I have tried a couple of the metal topped versions of snow foam bottle and they all damage the plastic bottles thread overtime so this plastic on plastic click like creates a surprisingly great seal and also has certainly lasted longer than any of the others, I’ve been using it for 4+ months now and it’s more than enough todo my hatchback car in one bottle – could probably do 2/3 but I’m generous with the amount. Great product and value for money.
Good that you can adjust the volume of cleaner running through
Bigger bottle than what comes with the Karher pressure washe
does the job..mix foam with water..attach…spray… easy as that..no spray no lay
This tool with Meguiar’s foam makes cleaning my caravan roof so much easier, wet the roof, coat it with foam and leave for 15 mins, then rinse off. Job done.
Exactly as advertised will up date when used
Update found that this worked well so very happily with i
I was a bit dubious about this after reading the review about using too much shampoo but after now using this on four cars and only used 1/2 of the container I feed it working OK. yes the soup bubbles disappear after a while but that is not an issue for me.
The mouth piece is the same fitting on a Karcher 300 but the nozzle isn’t deep enough. I have trimmed some of the excess plastic to make it thinner-longer and it now fits perfectly
Both these things work well. I think a lot of this type of thing is style over substance, with marketing pushing a theoretical gain that you may not notice in practice for much more cash.
These two work as well as any other I’ve used costing more.
The only small drawback to the foamer is it doesn’t want to stay upright. There’s another brand with a conical shape and a flat bottom which might be better in this respect but with a big stiff hose pushing it maybe that would fall over too? I just don’t connect it till I’m ready to use it, unconnected it stays upright no problem.
I think liquid holder should be screwed in not a bayonet fixing also not big enough capacity, had to refill twice on dirty car . Will stick to bucket & sponge but will use to soak if car muddy
Criticised on some ‘car cleaning’ websites in quite scathing terms, but it worked OK for me.
Foam produced is perhaps a bit ‘thin’ and runs off the car quickly, but you can always quickly spray another coat again. Broad coverage from the gun, so to do so is quick.
The key is in the detergent’s cleansing properties, and these I found to be OK.
Easy to use with the Karcher pressure washer, and a bit of fun as well!
Detergent seems to go a long way.
Makes a decent foam when in the high setting but not fantastic otherwise. The problem is, in the high setting, the detergent is gone. I just about managed one car!