Laser Module Kit 450nm 80W with Air Assistance,LASER TREE
Laser Module Kit 450nm 80W with Air Assistance,LASER TREE 10W Optical Power Laser Cutter Module Head Kit, Double Ultra-Fine Compressed Spot Compatible with Laser Engraver Cutting Machine,12V
From the brand
Laser module accessories
| Weight: | 620 g |
| Dimensions: | 19.4 x 11.5 x 7.4 cm; 620 Grams |
| Batteries Required: | No |
| Manufacture: | LASER TREE |
| Dimensions: | 19.4 x 11.5 x 7.4 cm; 620 Grams |
Qualitt ist Super fr den Preis.
Der Laser hat mit 10 Watt Optischer Leistung Genug Power fr die meisten Anwendungen.
Mit Air Assist schneidet er wirklich sehr sauber auch dickere Organische Materialien.
Was er nicht kann ist Acrylglas schneiden wenn es glasklar ist , sprich durchsichtig,
das knnen nur CO Laser mit der Richtigen Wellenlnge.
Schwarzes bzw. Farbiges Acrylglas geht aber noch gut.
Laserschutz Brille ist Absolut Pflicht!!! , und auch mit Schutzbrille Niemals direkt in den Strahl Blicken !!!.
Die Schutzbrille muss fr die am Lasermodul angegebene Wellenlnge unbedingt bereinstimmen.
Bei Laserschutzbrillen wird auch eine Durchlssigkeit angegeben , diese ist ebenfalls entsprechen zu auszuwhlen.
Des weiteren muss Gewhrleistet werden , das keine Laserstrahlen Den Raum verlassen knnen und damit unbeteiligte Schaden erleiden knnen. Zum Selbstschutz ist es auch von Vorteil smtliche Reflektionen zu verhindern zB. Fenster oder Spiegelnde Materialien.
L’ho sostituito su uno Sculpfun S6: dal punto di vista elettrico perfettamente compatibile: stesso connettore e non stato necessario sostituire l’alimentatore 12V 3A. L’unico problema stato il montaggio perch non sono riuscito ad usare le piastre fornite. Oltretutto sono abbastanza pesanti, per cui ho preferito fare un supporto con la stampante 3D.
Il (doppio) laser potente: taglia il compensato da 3 mm con una sola passata a met potenza e velocit 200, senza sbavature o annerimenti sui lati, con qualche accorgimento sono arrivato fino a 10 mm.
Importante la pompa: io ho optato per una Pawfly MC 3000 da 16 Lt/min: silenziosa e a basso consumo.
Amazon impeccabile come al solito.
Absolut top, das Produkt hlt was es verspricht, bin sehr zufrieden.
Schneidet sehr przise, kann ich nur empfehlen.
Einfacher Austausch. Sehr wirkungsvolle Leistung, lasert bei 30% schon seht tief.
Lfter ist etwas zu laut, aber ok.
Habe meinen Atomstack 5 damit ersetzt und bin zufrieden. Cooles Gadget, das man die magnetische Schutzblende zur Ausrichtung abnehmen kann.
Bisher bin ich sehr zufrieden mit dem Laser. Durch den zustzlichen treiben und die Montageplatte mit ausreichend lchern, sollte man bei keinem Laser Probleme mit dem Austausch bekommen.
Vorher hatte ich einen 5W laser bei dem ich fr 4mm Sperrholz bei 150mm/s auf 100% Leistung, 4 durchgnge gebraucht habe. Mit dem neuen Laserkopf brauche ich nur einen Durchgang bei 300mm/s.
Der Preis ist sehr gut, wie ich finde.
Prodotto molto valido, ha soddisfatto a pieno le mie aspettative,
E cosa positivissima l’ottima assistenza post vendita, che rispondono immediatamente e ti aiutano a risolvere e chiarire eventuali dubbi.
Molto soddisfatto.
He comprado este laser para mi wainlux jl3, al principio fue difcil conectarlo pero con la ayuda del vendedor que en todo momento ha estado pendiente y ayudando al final lo consegu, de momento no lo he podido probar mucho, pero en pocos das ver todas las cosas que puedo hacer con el, quiero recalcar al vendedor que de verdad ha estado en todo momento ayudando con cada pregunta que le haca, muchsimas gracias, en un futuro volver a comprarles.
Der Laser kam schn verpackt an. Anschlieen war relativ einfach. Der Unterschied zum originalen laserkopf ist deutlich sprbar und das gravieren geht nun mit weniger Laserkraft und dennoch schneller. Robuster Aufbau des Laserkopfs. Bin wirklich begeistert!
Das ist meine erste Rezension berhaupt… top Service, hervorragendes Produkt! Absolute Kaufempfehlung! Vielen Dank fr die Untersttzung!
Aunque tuve un inconveniente el vendedor lo ha gestionado de forma rpida y profesional, es mdulo es potente y viene con accesorios,contenta con la compra, recomiendo 100%.
Un buon laser la potenza di 10w garantisce ottimi risultati, molto male invece lo z axis, che fissato solamente con 2 viti ci lo rende instabile
Hab mir dieses Modul zugelegt, weil schon nach wenigen Monaten der Laser von A…..K A10Pro den Geist aufgegeben hat und der Support mehr als Minderwertig und nicht Kundenfreundlich agiert hat. Dieses Produkt hat mich wahrlich berzeugt. Kein Vergleich zu dem vorherigen Lasermodul. 3mm Balser in einem Durchgang geschnitten. Auch die Halterung passt zu dem A…..K und so bin ich sehr zufrieden bis auf den Punkt, wo man sich nicht wirklich Gedanke gemacht hat ber die Treiberplatte. Hier ist ein wenig Eigenkonstruktion gefragt.
La livraison par Amazon a t extrmement rapide, comme d’habitude. Quant au laser, j’ai t extrmement surpris, agrablement de sa puissance de dcoupe et de sa prcision. Tantt bien pour la gravure sur plusieurs types de bois ou de matriaux et. Et surtout sur la dcoupe o je faisais avant. Avec un laser 40. 55, watts. 3 passes avec ceux laser une seule passe suffi. Idem pour les 5 millimtres. Il m’en faut 2 passes et demie, voire 2 selon la vitesse. J’ai eu une conversation avec. Un des dirigeants sur WhatsApp ? Pour avoir des renseignements. Et j’ai t extrmement surpris Pour leur ractivit qui ? Et quasi instantane quand ? Sont bien sr connectes. Je leur ai pos beaucoup. Beaucoup de questions sur. Les dcoupes et gravures. Et ils m’ont rpondu en. Envoyant mme 1PDF avec. Les instructions sur le laser j’ai un laser 10 watts En 12 volts.
J’ai eu un problme avec le ventilateur de la. On a fait plusieurs tests dessus pour voir son bon fonctionnement. Il s’avre qu’il est des. Et dfectueux. Et il n’a pas hsit le jour mme de m’envoyer un autre. Afin que je puisse le recevoir. Au bout de 2 semaines ? Je dirais trs rapidement, car il l’a envoy de chine vers la france.
Alors aujourd’hui, si on me demande si je peux le recommander, je dirais sans hsiter. Oui, sans aucun problme. Car avec une laser que j’avais achet. Une atomstack A5 pro, Je n’ai eu qu’ remplacer le laser. Qui tait d’un 5 watts pour. Un laser 10 watt.
Et en faisant le calcul, il s’avre que c’est beaucoup moins cher d’acheter un laser de 10 watts que d’acheter. Un laser complet qui se joue aux alentours de 600 voir. 1000. Me calculer facilement faisable. Donc merci eux de leur cordialit et rapidit.
J’ai acheter ce laser pour l’adapter sur mon ender 3 et ainsi pouvoir la transformer en graveuse. J’ai eu beaucoup de problmes avec mon laser mais le fournisseur a toujours tenu rsoudre mes problmes en discutant avec moi. Aprs des mois d’essai et d’change avec le service. Ils ont finalement accept de me renvoyer un laser fonctionnel. Je n’ai jamais rencontr un service client aussi efficace malgr la distance, le dcalage horaire et le langage. Je recommande!
Prodotto molto valido per tutto ci che gira intorno alle cnc sia per taglio che per incisione. Facilissima istallazione su una macchina home
Made,compatibile con grbl. Molto robusto e ben fatto, bella
Confezione compresi ugello per aria , barrette per la messa a fuoco e attacco con guida per la
Registrazione. Capacit di taglio 10mm con una passata per legno senza venatura, 8 mm per multistrato. Prodotto
Consigliato
Excellent product. Brilliant upgrade from the one I had. Very easy to set up.
Will recommend this product to others.
Avevo urgenza di un laser che mi permettesse di terminare dei lavori iniziati, e mi sono imbattuto in questo piccolo gioiello, come potete notare dai miei lavori, pu passare dalla semplice incisione di una scritta alla riproduzione di una foto e al taglio, n consiglio l’acquisto anche dal fatto che sei seguito anche nel post vendita
Very good item from a responsive supplier. Fitted to my Atomstack A5 Pro in a few minuets. You will need two M5 x 5mm screws to fix the Laser Tree bracket to the Atomstack. The original laser cable plugs into the Laser Tree module without any problems. Test cuts were undertaken within 15 minuets of starting the conversion.
Very impressed with both the module and the supplier.
I bought this laser module as an upgrade to my Atomstack A5 M40 laser etcher.
Installation was extremely simple, it was just four screws and an electrical connector. The installation plate that came with the kit already had the holes in the correct place for installation on the Atomstck’s carriage.
Once installed, it worked straight away with no problems whatsoever.
The previous laser I had was a 5.5W optical power, this is 10W of optical power. The diference is very noticeable. I can now cut through 3mm Plywood in a single pass, which was not possible with my olod laser, which would need 3-4 passes. I have not tried anything thicker yet, but I plan to try some 6mm MDF in the near future, and from the results so far I doubt there will be any problems.
I’ve only been using the laser module for a couple of days, but so far I would highly recommend it.
It does exactly what it’s supposed to.
I bought this as an upgrade from a 10w unit and so far it’s gone above and beyond what I was expecting. The cuts are so much cleaner.
Would have been a lot better if more info on settings for different materials where provided but after a bit of trial and error it’s working well.
Ordered on Thursday for delivery Monday
Arrived Sunday morning
Fitted to my Atomstack A5 and it worked straight away
Does everything they claimed
I’ve got to say. This bad boy is a game changer. Easy to install, and it’s plug and play. I didn’t have too change any settings on my ortur lm2. My biggest problem is working out speeds and power settings, purely because it’s double the wattage. Once you’ve learnt to decrease these. Your good to go. Love i
Super produit de remplacement pour ma graveuse laser ortur laser master 2. Il a fallu acheter sparment une alimentation 12v 5a relie directement la machine (voir vido sur youtube) et en 1 rien de temps mon appareil est pass au niveau suprieur ! La dcoupe n’a jamais t aussi facile, la gravure est d’une prcision incroyable, le focus fixe combin l’ajustage de l’axe Z par rail a vis et les plaquettes de mise au point d’paisseur multiples permettent de facilement prparer le travail de gravure/dcoupe. J’ai longtemps hsit mais je suisvpas du de l’achat, 1 peu cher certes mais votre machine actuelle avec ce laser vous cotera moins cher que des machines de capacit similaire. Un point bonus : le vendeur qui vous contacte pour s’assurer que vous n’ayez pas de dsagrment.
El laser es una pasada, una vez configurado con la tarjeta va de lujo. El vendedor te resuelve las dudas y contesta muy rpido a las preguntas. lo recomiendo.
Quite a good laser for an undemanding user. It’s a pity that they don’t include 4-pin to 3-pin adapters. The magnetic eye protection works very well. I recommend buying a focus adjustment attachment to make your work easier. Overall, I recommend the product.
p.s. ho iniziato a fare anche delle incisioni su tavolette di ardesia e devo dire che vendono piuttosto bene.
Good product at a decent price. Cuts cleanly through 4mm pine board at 100% power and 80mm/min speed. I initially had some problems driving it with a Duet2 motherboard but I changed to a Duet3 mini5+ Big Dipper board and it worked first time. The literature is not very clear so it is good to know that the PWM signal needs to be 0-5v and 0v turns the laser full on (the Duet2 board produced an inverted signal of only 0-3v3).
The laser arrived within 2 days and fitted with no problems, to my Atomstack A5. It’s quick and gives an excellent precise cut. The only issue I have found is that the cooling fan which is situated on top is not guarded and presents a safety issue when adjusting the height. Also there was an odd request from the seller about a problem in the manual attached. Could not find attached manual. Apart from that I’m well happy with it.
Je n’ai pas de point de comparaison, mais celui ci est trs bien.
C’est un laser focale fixe, je l’ai ajout une fraiseuse numrique qui est donc rglable en Z, et cela me permet de faire une mise au point parfaite.
Attention, mme si c’est un laser assez puissant, il ne permet pas de couper du plexyglass.
Aucun problme pour dcouper du contreplaqu de peuplier de 5mm en une seule passe 250mm/min
Le point est de 0.08mm ce qui me semble prcis, j’ai ralis de belles impression (images) et de trs beaux logos vectoriss.
La focale se rgle 45mm depuis le bas du chssis du laser pour de la gravure.
On peut rgler 44 ou 43mm pour la dcoupe.
L’assistance air est vraiment gniale, je l’ai raccord mon compresseur (2.5 bar de pression)
Going great, will cut thin (1.6mm) ply in 1 pass and 3mm in 2. Took a couple of tries for engraving as I had power too high and moved too slow but got there
The 40w module on my Yorahome 6550 had given up the ghost after only about 6 months. Rather than paying 380 for the Yorahome 80w module replacement, I thought I would take a gamble on this as it was almost half the price.
The package arrived more than a week earlier than expected. I was very happy to find it is a simple plug and play replacement on my machine and after a few test engravings, I can say it is preforming brilliantly.
I have not yet tested it’s cutting performance, but I am very impressed so far with the operation and build quality of this laser.
So I’ve waited a while to do a review and the first 1 I orderd was faulty on arrival.customer service was outstanding. Before sending out a completely new laser they send a board out but that did not solve the problem.in the end they send me out a new laser and also did not want the other 1 back.
Now the laser it self it pretty good.i try and cut things in 1 pass if I.can and this does it no problem with wood up to 3mm.any thing thicker would require more passes. I mainly cut 3mm mdf ply and 300gsm card.
So to sum it up its good.if there is a problem customer service is excellent.
che dire mi e arrivato domenica mattina montato subito avendo avuto un problema con i collegamenti ho inviato un email al venditore che mi ha risposto dopo poco meno di 2 ore e parlo di DOMENICA spiegandomi il corretto modo per collegare i fili di alimentazione provo subito il laser su un pannello di multistrato di 10 mm e con 2 passate e circa 4/5 minuti di tempo un taglio perfetto pulito venditore gentilissimo e disponibile sia nel pre e pos vendita consigliatissimo
On se rend compte immdiatement de la puissance fournie par le laser ds la premire utilisation.
Facile monter et focaliser, il s’adapte directeur sur le support fourni sur ma cnc. Le laser permet d’utiliser un systme air assist et il est fourni avec une lentille de rechange.
Attention, ce type de laser a une consommation importante (logique vu la puissance fournie) et il faut une alimentation adapte. On utilise juste la liaison de contrle de la carte GRBL et le cble d’alimentation du laser est lui branch en direct sur l’alimentation (montage assez classique). Ne pas brancher directement le fil d’alimentation du laser sur la carte car la puissance fournie par dfaut par la carte de contrle ne sera probablement pas suffisante sur la plupart des CNC.
En conclusion, un excellent laser pour un prix trs raisonnable.
O laser depois de achar a distncia focal, porta-se lindamente. Ainda cedo para formar uma opinio definitiva, mas at agora, vo quatro semanas a trabalhar praticamente todos os dias duas a trs horas , nada h a dizer de negativo, eu tenhos dois mdulos da ortur e este est bem melhor. Pondero adquirir o de 20 w pticos.
A very powerful laser module that produces very sharp engravings and cuts. The fixed focus is a blessing with no fiddling to get it in focus. A change of settings in Lightburn was needed to accommodate the extra power but other than that it was a simple and quick exercise to get it up and running.
My only regret is that I should of purchased this earlier on instead of wasting time with various other cheaper modules and not getting good results.
The kit turned up much earlier than expected which was a surprise when you consider how far it ha to come.
I will purchase another one at a later date when finances allow.
I have tested the product and still experimenting with speeds and power as this unit is a more powerful laser than the Neje 30w i replaced.
So far i am very happy with the results and find that a fixed focus laser is a lot easier to use than trying to focus the other which i found difficult.
The air assist is very good but the only thing i would change is the size of the nozzle for the tube which in my case was too small to fit the standard fishtank tubing.
I found a small piece of plastic which reduced the size of the tubing and fitted the nozzle ok so no problem but maybe adding a small plastic adapter with the laser would help a lot of people.
I had no problem converting the Neje cable to the Laser tree once i did a bit of research as to which JST plug and socket was on each and then purchased the correct ones
for the job, the Neje has four leads and one which is temperature which is left out so just connect the other three .
Wiring has worked fine and no problems with the laser at all so far, so very pleased with my purchase
and a good price.
Great laser but when it arrived I must admit I wasn’t too impressed as I had to make a wooden adaptor to go between the laser and my Atomstack machine. Unfortunately it arrived without any instructions and even though I searched the internet I still struggled with set up but after Laser Tree contacted me to ask how I was getting on I told them and received a very clear instruction sheet by email. Of course I don’t know if the missing instructions were a one off or they normally don’t supply any but they assured me every laser would have some in future. Time and experience will prove how powerful this machine is but I am very happy at the moment and feel confident if I experience problems or need advice I can contact Laser Tree direct. If you are replacing an existing laser I would recommend you look at buying the model that comes with the fitting kit, I didn’t see that one till after I had ordered but hopefully Laser Tree will sell me what I need instead of mounting it on a wooden block.
Overall it is a very good bit of kit. Be careful with this as it is a very powerful laser. Will be buying a new one from them when this one reaches the end of its life.