FANTRONIX Black 100 mm Stylish Glass Front Bathroom
FANTRONIX Black 100 mm Stylish Glass Front Bathroom Extractor fan with Timer and Humidity Sensor Ultra Quiet Slim Design Shower Toilet Moisture Control
Bathroom zone and IP rating
1, IP45
2, IP44
1, IP45
Extraction rate
97 m3/hour
90 m3/hour
97 m3/hour
dbA @3m distance
25
25
25
Vent grille cover
✓
Flexible ducting
✓
Available variants
Standard, Timer, Humidistat
Standard, Timer, Humidistat
Standard, Timer, Humidistat
Diameter: 100mm, 125mm, 150mm
100mm dia x 3m long, 100mm dia x 6m long, 125mm dia x 3m long, 125mm dia x 6m long, 150mm dia x 3m long, 150mm dia x 6m long
Very elegant looking, so quiet we had to double check it was working! Can’t be operated by a pull cord and has to be wired in by a qualified electrician.
Really easy to fit, the instructions were great and it looks amazing! This comes with the standard white cover on the actual fan, which you just screw off and replace with the cover you choose
5.0 out of 5 stars Looks amazing, finishes off my bathroom!
Needed something to fit in with new porcelain tiles as electrician fitted a basic white fan. This fits perfectly, so much so the that when the company who supplied and fitted the tiles came back, they asked me where it was from
I didn’t install this my fitter did so can’t help on that it was on constant due to sensitivity setting I had my fitter turn it down does the job and goes with bathroom
Very hard to find a black one I am happy
Great value for money at 29.99.
The same model in the white version and the black version are more money but do the same thing, so I guess Red is unpopular, but if the colour doesnt bother you then it’s a bit of a bargain.
The front coloured glass is swappable so you can easily leave it off and keep the standard white grill that comes in the box or just buy the black or white glass later.
Easy to fit, straight swap for my very old 4″ Bathroom fan, installed in 20 minutes start to finish, and quieter than previous, all in all very happy.
– A handy, compact and not too lightweighted extractor fan for your bathroom, toilet, ensuite, which could be wall or ceiling mounted. I used it in my ensuite and it fitted as expected, with some adjustments for proper fitting.
– The fan has a solid build quality, fine finishing
in outer red colour (stylish), and the size is 4inch (approx 100mm diameter duct connection). Check the size of yours before hand for appropriate fitting.
– The adjustable timer function allows the fan to continue running for upto 30minutes after the fans have been switched off which is required for toilets not fitted with windows for appropriate ventilation. The timer could be set from 2-30minutes ap per the requirements and moisture, air build up in the area. The fan extracts the moist air and vapour out quickly thus preventing damps and condensation.
– The back draught shutter draught helps in reducing wind and drafts entering back in the area keeping things clean. It’s fairly low in producing noise levels which is soothing and comfortable.
– The price is in the competitive range and always worth to have an extra extractor fan when needed. This one does the job.
The previous extractor fan in our downstairs bathroom tripped my breaker due to moisture across the mains terminal block and tracking occurred. I was looking for a replacement for that old fan as it was quite noisy as well and with this issue it became a bit of an issue to keep the original extractor fan plugged in.
This fan does what is says and is REALLY QUIET. Sometimes I barely notice it has come on. Although at low speed the fan is almost silent the airflow is low. I set the fan on the high speed operation it gives out a gentle hum but does give improved air extraction.
It was pretty easy to install, took less than an hour (replacing an existing one). To be safe I have drilled some drainage slots in the cover to let any moisture drain out.
Only tricky bit was the shutter would open but that was because my ducting was in the way. Great little fan overall!
This top-quality FANTRONIX Extractor Fan was easy to swap with my old noisy fan; I didn’t need to drill a hole in my tile wall as this fan was the same size as my old one. In addition, this fan is surprisingly quiet!
It seems sturdy and does a good job, fitted with an adjustable timer which is a bonus.
The charming design looks very stylish and modern, reflects the value of money. It is a shame not being able to choose a different colour.
My bath tile is mainly white, but I could take this extractor fan only in red. It would have been nice to have a white/chrome.
I hope this review helps you to make a purchasing decision.
his review is for theFantronix 4 inch 100 mm Red Timer Extractor Fan Modern Look Easy Fit Anti Condensation Damp Mould Steam Control Bathroom Shower Cloakroom Silent Toilet.
This is good quality and really well made extractor fan. It arrived well packaged and on time. It was easy to install and works really well. It is very quiet. Would defo recommend for anyone loo for a new extractor. Also is red, which is nice bridge colour.. i love it.
A very modern looking and sleek glass extractor fan that is compact and easy to install. The timer feature is a favourite of mine and it can be set to turn on when the room feels humid so no wastage or leaving on by accident which I really like. Build quality is very good, it feels quite heavy/substantial.
Very quiet compared to an old unit, I’d recommend.
When I first received this item, I thought that it was quite dirty, however, you just have to remove the cover on the actual screen and then it looks very very clean. This item was delivered quickly and in great packaging, I used it straight away.
It is easy to set up, and I like the fact that it looks quite smart and stylish, and even though you can clearly see it in my bathroom, I don’t mind because it looks quite nice. It is made for the bathroom, and when I used it, it is very quiet and removes a lot of the steam and condensation which is great.
Overall, really good extractor fan and highly recommended.
This is a really smart and functional extractor, one notch down from their more premium model this still has the run-on timer but no humidity sensor, I like that it does retains some of the best features though such as the same stylish glass front and the air straightening vents which work wonders in reducing noise, size is 100mm and airflow rate 25l so good for small to medium bathrooms, all in all it’s a great kit that both looks stylish and has some really good features, recommended to all.
You generally, well normally, want your bathroom fans to vanish into the background and not be a feature in the room, leaving other, more desirable items to stand out. This doesn’t look like a fan when it has been fitted, hiding the functioning parts behind a red sheet of glass that provides an accent look that can be mirrored with other features in the room. Note that the red glass panel has a sheet protecting the surface; mine was pristine once the scruffy cover was removed and it looks fantastic. It makes a nice change to make a feature out of something you don’t normally want to focus on. Oh, it also runs quietly and makes a good job of extraction to boot.
I ordered this to replace a noisy fan unit in my bathroom, that is I suspect over thirty years old. Reading the instructions supplied I have decided that it is not something that should be attempted by the unqualified. Therefore, I can only comment on the build quality as I see it.
The unit is boxed with the necessary fittings and comprises the fan unit and an optional tiled panel, to make it more aesthetically pleasing than just seeing the fan itself. This is a good feature as bathroom fans do build up dust over time and have to be cleaned quite regularly if they are to look nice.
There are a number of warnings about fitting the fan, most were obvious and largely the usual disclaimers. However, it was the more technical restrictions and instructions, that suggest to me that it might not be a simple DIY replacement.
A good quiet extractor fan but for the price it does feel a bit cheap. It does have a nice modern design and would suit a nice modern bathroom. The glass makes it more premium but if you cannot fit it on you are left with a cheap plastic fan so make sure you have your measurements correct alternatively can just use a multi tool tile cutter.
bien fini
efficace
facile a installer
facade en verre tres design
un peu che
Not too noisy like my last onelove the idea of the cove
Very elegant looking, so quiet we had to double check it was working! Can’t be operated by a pull cord and has to be wired in by a qualified electrician.
Really easy to fit, the instructions were great and it looks amazing! This comes with the standard white cover on the actual fan, which you just screw off and replace with the cover you choose
After buying a few different fans, I settled on this. Looks great worth the extra money
Needed something to fit in with new porcelain tiles as electrician fitted a basic white fan. This fits perfectly, so much so the that when the company who supplied and fitted the tiles came back, they asked me where it was from
I didn’t install this my fitter did so can’t help on that it was on constant due to sensitivity setting I had my fitter turn it down does the job and goes with bathroom
Very hard to find a black one I am happy
Great value for money at 29.99.
The same model in the white version and the black version are more money but do the same thing, so I guess Red is unpopular, but if the colour doesnt bother you then it’s a bit of a bargain.
The front coloured glass is swappable so you can easily leave it off and keep the standard white grill that comes in the box or just buy the black or white glass later.
Easy to fit, straight swap for my very old 4″ Bathroom fan, installed in 20 minutes start to finish, and quieter than previous, all in all very happy.
Fitted this extractor in kitchen .
Very easy to fit an so modern looking.
And compared to my old fan this one is very quiet.
Love the look, reasonably quiet but not as quiet as I expected.
– A handy, compact and not too lightweighted extractor fan for your bathroom, toilet, ensuite, which could be wall or ceiling mounted. I used it in my ensuite and it fitted as expected, with some adjustments for proper fitting.
– The fan has a solid build quality, fine finishing
in outer red colour (stylish), and the size is 4inch (approx 100mm diameter duct connection). Check the size of yours before hand for appropriate fitting.
– The adjustable timer function allows the fan to continue running for upto 30minutes after the fans have been switched off which is required for toilets not fitted with windows for appropriate ventilation. The timer could be set from 2-30minutes ap per the requirements and moisture, air build up in the area. The fan extracts the moist air and vapour out quickly thus preventing damps and condensation.
– The back draught shutter draught helps in reducing wind and drafts entering back in the area keeping things clean. It’s fairly low in producing noise levels which is soothing and comfortable.
– The price is in the competitive range and always worth to have an extra extractor fan when needed. This one does the job.
The previous extractor fan in our downstairs bathroom tripped my breaker due to moisture across the mains terminal block and tracking occurred. I was looking for a replacement for that old fan as it was quite noisy as well and with this issue it became a bit of an issue to keep the original extractor fan plugged in.
This fan does what is says and is REALLY QUIET. Sometimes I barely notice it has come on. Although at low speed the fan is almost silent the airflow is low. I set the fan on the high speed operation it gives out a gentle hum but does give improved air extraction.
It was pretty easy to install, took less than an hour (replacing an existing one). To be safe I have drilled some drainage slots in the cover to let any moisture drain out.
Only tricky bit was the shutter would open but that was because my ducting was in the way. Great little fan overall!
This top-quality FANTRONIX Extractor Fan was easy to swap with my old noisy fan; I didn’t need to drill a hole in my tile wall as this fan was the same size as my old one. In addition, this fan is surprisingly quiet!
It seems sturdy and does a good job, fitted with an adjustable timer which is a bonus.
The charming design looks very stylish and modern, reflects the value of money. It is a shame not being able to choose a different colour.
My bath tile is mainly white, but I could take this extractor fan only in red. It would have been nice to have a white/chrome.
I hope this review helps you to make a purchasing decision.
his review is for theFantronix 4 inch 100 mm Red Timer Extractor Fan Modern Look Easy Fit Anti Condensation Damp Mould Steam Control Bathroom Shower Cloakroom Silent Toilet.
This is good quality and really well made extractor fan. It arrived well packaged and on time. It was easy to install and works really well. It is very quiet. Would defo recommend for anyone loo for a new extractor. Also is red, which is nice bridge colour.. i love it.
A very modern looking and sleek glass extractor fan that is compact and easy to install. The timer feature is a favourite of mine and it can be set to turn on when the room feels humid so no wastage or leaving on by accident which I really like. Build quality is very good, it feels quite heavy/substantial.
Very quiet compared to an old unit, I’d recommend.
When I first received this item, I thought that it was quite dirty, however, you just have to remove the cover on the actual screen and then it looks very very clean. This item was delivered quickly and in great packaging, I used it straight away.
It is easy to set up, and I like the fact that it looks quite smart and stylish, and even though you can clearly see it in my bathroom, I don’t mind because it looks quite nice. It is made for the bathroom, and when I used it, it is very quiet and removes a lot of the steam and condensation which is great.
Overall, really good extractor fan and highly recommended.
This is a really smart and functional extractor, one notch down from their more premium model this still has the run-on timer but no humidity sensor, I like that it does retains some of the best features though such as the same stylish glass front and the air straightening vents which work wonders in reducing noise, size is 100mm and airflow rate 25l so good for small to medium bathrooms, all in all it’s a great kit that both looks stylish and has some really good features, recommended to all.
You generally, well normally, want your bathroom fans to vanish into the background and not be a feature in the room, leaving other, more desirable items to stand out. This doesn’t look like a fan when it has been fitted, hiding the functioning parts behind a red sheet of glass that provides an accent look that can be mirrored with other features in the room. Note that the red glass panel has a sheet protecting the surface; mine was pristine once the scruffy cover was removed and it looks fantastic. It makes a nice change to make a feature out of something you don’t normally want to focus on. Oh, it also runs quietly and makes a good job of extraction to boot.
I ordered this to replace a noisy fan unit in my bathroom, that is I suspect over thirty years old. Reading the instructions supplied I have decided that it is not something that should be attempted by the unqualified. Therefore, I can only comment on the build quality as I see it.
The unit is boxed with the necessary fittings and comprises the fan unit and an optional tiled panel, to make it more aesthetically pleasing than just seeing the fan itself. This is a good feature as bathroom fans do build up dust over time and have to be cleaned quite regularly if they are to look nice.
There are a number of warnings about fitting the fan, most were obvious and largely the usual disclaimers. However, it was the more technical restrictions and instructions, that suggest to me that it might not be a simple DIY replacement.
It’s easy to fit and the timer is a really useful function. Runs more effectively than my old extractor fan.
A good quiet extractor fan but for the price it does feel a bit cheap. It does have a nice modern design and would suit a nice modern bathroom. The glass makes it more premium but if you cannot fit it on you are left with a cheap plastic fan so make sure you have your measurements correct alternatively can just use a multi tool tile cutter.