Fractal Design Meshify 2 Mini White TG Clear Ti
Fractal Design Meshify 2 Mini White TG Clear Ti
| Weight: | 7.7 kg |
| Dimensions: | 39.6 x 20.5 x 40.6 cm; 7.7 Kilograms |
| Brand: | Fractal Design |
| Model: | FD-C-MES2M-02 |
| Colour: | White TG Clear Tint |
| Batteries Included: | No |
| Manufacture: | FRACTAL DESIGN |
| Dimensions: | 39.6 x 20.5 x 40.6 cm; 7.7 Kilograms |
Typisch Fractal. Tolle Qualität.
Ich habe schon die alte Generation des Meshify gehabt, damals noch als ATX- statt MATX-Gehuse. Und auch dieses Mal habe ich richtig entschieden. Das Gehuse ist gut verpackt, wobei ich bei der Build Quality keine Angst haben brauchte. Die Scheibe und Seitenpanel werden nun nicht mehr ins Gehuse geschraubt, sondern eingeklickt, was die Handhabung leichter macht aber bei einem mittelmigem Kabelmanagement drcken die Kabel bei Bewegung des Gehuses das Seitenpanel auf.
Fr ein kompaktes Gehuse, das schn, aber noch dezent ist, ist das Meshify 2 Mini top geeignet.
Ottimo ma non perfetto.
Ottimo case, risponde alle mie aspettative in fatto di qualit costruttiva.
Unica pecca, e motivo per cui non lo giudico perfetto l’instabilit della porta USB-C frontale che ho scoperto essere un difetto di questo e di altri case Fractal.
Very tight on the back
Overall that’s a great case that’s easy to build. Good quality and a lot of space even for the form factor.
The only one thing that made my experience frustrating: there is very little space on the back.
I usually don’t care that much about the cable management since it’s on the back and you can’t see it, but with this one I had to really try to align cables multiple times in order to close the back.
The screwless back opening also made it worse, usually you can just fit everything in and push it hard enough and seal it with a screw, but in meshify 2 mini you can not, it just pops our if you haven’t done a good cable management.
So 8/10 for the case, -2 for very a frustrating build.
Compacte et élégante
J’ai confi cette tour mon ami adepte des montage de PC pour qu’il me ralise une configuration adapte mes besoins.
Cette tour est relativement simple : pas de superficiel dans le design, pas de RGB en tout genre : que l’essentiel, sobre et lgant.
La circulation de l’air est bonne dans le boitier pour favoriser le refroidissement des composants. La vitre latrale se dmonte sans outils pour de temps en temps passer un coup de souffleur et vacuer la poussire qui peut s’accumuler.
D’aprs ses remarques, ce boitier est assez petit ce qui oblige bien organiser la disposition de ses composants
Manque quelques prises supplmentaires sur le dessus pour brancher notamment des clefs USB.
Boitier sobre et digne
Boitiers de qualit pour ceux et celle qui aime les choses bien faite et sobre. (dj que j’aime pas les priphriques RGB c’est pas pour avoir un sapin de nol sur mon bureau ^^).
le panneau latral en verre permet de jet un coup d’il rapide sur ses quipements, led de contrle et de facon tres singulire avec son verre teinte.
Dmontage et montage sans avoir besoin de tournevis et de se battre avec les vis est parfait.
le cble management est facilit.
La ventilation est optimis e qui est parfait et changera de mon boitier ouvert sur le cot .
No es tan "Mini" como esperaba.
En comparacin con otras torres mini tipo MC300 de MarsGam. es bastante ms grande en cuanto a tamao exterior. Esto se traduce en un mejor acceso de los componentes para el montaje y a una ventilacin mucho ms optimizada.
Es diseo exterior es precioso y minimalista. La combinacin en color blanco con negro queda super elegante. Los materiales son de una gran calidad, tanto el metal como el cristal. Viene con 2 grandes ventiladores interiores.
Las tapas frontales y superior son completamente desmontables, lo que facilita el montaje y limpieza del interior de una forma brbara. Lleva filtros desmontables delante, arriba y abajo.
El espacio interior est perfectamente organizado, y cabe una buena cantidad de discos duros y una GPU de gran tamao. Obviamente no tiene zona para lectoras en el frontal.
Los botones de encendido/apagado estn en la parte superior, al igual que los usb y la toma de sonido.
Viene con unas instrucciones muy detalladas de los diversos tipos y combinaciones de montaje que se pueden realizar.
En definitiva, una caja de pc algo cara pero de una calidad y diseo excelente. Completamente recomendable si buscas algo de tamao bastante contenido y con mucha ventilacin.
En dos palabras: preci-osa!
Vamos a ser claros: como caja es una autentica pasada! Si, algo carilla y obviamente no incluye la FA (casi lo prefiero), pero el diseo es espectacular, tanto por el panel transparente, como por los colores, la eleccin de materiales, el patrn geomtrico que han utilizado, la apertura sin herramientas, la inclusin de puertos USB-C en el frontal, los ventiladores super silenciosos -y gracias a dios, sin lucecitas RGB que en mi opinin romperan la esttica-… Leches, han cuidado el detalle del diseo y la experiencia del usuario tan al mnimo que hasta se han molestado en incluir un patrn impreso en el interior de la caja de embalaje de cartn, que slo se ve una vez abierta.
Queda preciosa, limpia, firme, elegante… pese al juego de palabras de mi ttulo -sigo pensando que no es barato- tras probarla y viendo como queda la verdad, merece la pena y la recomendara sin dudarlo: 10/10!
M-ATX
Case di eccellente qualit con supporto per M-ATX, non compatibile con ATX. Il pannello laterale realizzato in vetro temperato, perfetto per mettere in mostra la scenografia luminosa del desktop. Si tratta di un case all’avanguardia, completo di connessione type-c e due porte USB. Inoltre, dispone di un pannello filtro antipolvere per mantenere l’interno del case al riparo dalla polvere.
Design superbe
Trs jolie tour pour carte mre MICRO ATX (ne conviendra pas pour une carte mre de taille normale).
Son design est juste magnifique ! Une faade minimaliste, juste une grille noire et un ventilateur, un ventilateur l’arrire, un ct entirement transparent.
A noter, que tout est conu pour que l’air circule le plus possible, avec en dessous un filtre sur la grille d’aration.
J’ai hte de recevoir tout le matos pour finir de la remplir, et de la poser sur mon bureau ! A noter que son encombrement est minimal et que les branchements classiques type USB, USB C, prise micro, casque, et bouton d’alimentation sont sur le dessus de la tour!
Conue avec des matriaux de qualit, je la recommande vivement !
Overall a good case, with some drawbacks.
Pros:
Space-Efficient Design: The compact Micro-ATX design is a space-saver on my desk, allowing me to maximize my workspace efficiently.
Classic Meshify Aesthetics: The Meshify look is timeless, giving the case a sleek and sophisticated appearance.
USB Type-C : The inclusion of USB Type-C, alongside two Type-A ports, ensures compatibility with a variety of devices.
Tool-Free Panels: Assembling my PC was a breeze, thanks to the tool-free panels that made the build process quick and straightforward.
Decent Storage Support: The case provides ample support for storage drives, accommodating my storage needs without any issues.
Cons:
Voltage-Controlled Fans: The Fractal Dynamic X2 fans are voltage-controlled rather than PWM, limiting the precision of fan speed adjustments.
Tight Cable Spacing: Managing cables behind the right-hand panel can be a bit tricky due to tight spacing. Care is required to avoid potential hassles.
High Price Point: The price is on the higher side compared to some competitors, making it a bit of a splurge for those on a tight budget. Which is surprising as the mini form factor and M-ATX builds are usually on the cheaper side.
Lack of ARGB Lighting: Unfortunately, this case doesn’t come with ARGB lighting, which might be a deal-breaker for users seeking a more customizable lighting setup.
In conclusion, this case offers a space-efficient and visually appealing solution for your PC build. However, potential buyers should consider the trade-offs, such as the voltage-controlled fans, cable spacing, and no ARGB lighting. If these aspects align with your preferences and budget, this case could be a solid choice for your next build but cheaper options are available.
Super hochwertig
Der Fractal Design Meshify 2 Mini White TG Clear Tint kommt sicher verpackt hier an. Er ist erstklassig verarbeitet und sieht super chic aus. Ich habe sogleich meinen PC auseinandergebaut um den Fractal Design Meshify 2 Mini White TG Clear Tint nutzen zu knnen.
Er ist leise, sieht minimalistisch aus und macht wirklich was her im Bro
Klare Empfehlung
Quality case with great cable manageme
This case is suitable for Micro ATX motherboards therefore it is worth noting it will not fit regular/full-size motherboards.
It is a very sleek, compact case and I especially like it due to it’s small profile as it can fit on top of my desk without getting in the way too much.
I installed a 3060ti FE GPU into it and it fits with a small amount of leftover space but it certainly won’t fit some bigger cards so it’s worth checking the dimensions beforehand.
The building experience was one of the nicest I’ve had, there are plenty of silicon gromets throughout the case which you can push your wires through and hide them away very neatly. The power supply slot is at the bottom of the case, close enough that you don’t have wires traipsing everywhere, and nicely hidden away behind a divider.
The design of this case has clearly been very well thought out and not only does it look great, it also has excellent air flow meaning your components will stay cool and perform efficiently at all times.
This is a brilliant compact case for smaller builds.
Molto ben realizzato, solido e ordinato.
Case per pc della Fractal Design, modello Meshify 2.
per micro-atx o per le taglie inferiori di mobo.
Infatti l’ho scelto per una mini-itx che gi avevo.
Il case ottimamente confezionato.
Scatola rinforzata e solida.
Il case mi ha colpito per la qualit delle finiture e l’ottima progettazione.
Esaminandolo per procedere alla build vedo una delle torrette che mi sarebbero servite per la mobo mini-itx anomala.
C’era un filetto spezzato dentro.
Credo non se ne siano accorti durante la fabbricazione.
La svito con difficolt, volevo sostituirla, ma nella scatolina delle minutaglie, mancano esattamente le tre torrette extra.
Mai mi sarei accorto che mancavano le torrette se non ne avessero avvita una di rotta…
Insomma, qualche dubbio sul controllo qualit ce l’ho.
Per tutto il resto il case ottimo.
Solido, chiusure perfette.
La cosa che adoro sono i tre filtri per la polvere.
Semplificano moltissimo il tenere tutto pulito.
un case che consiglio per chi ama l’ordine.
Certo, se avete una mini-itx un pochino esagerato, ma essendo micro-atx vi lascia maggiori possibilit per il futuro, dato che le mobo mini-itx son sempre pi costose delle altre.
A beauty
Firstly getting this out of the box is a lovely experience, let’s be honest it’s modern and a bit funky but also sleek and a bit of a beauty. I chose the black which may have been a mistake as the tint is quite dark so you can’t see inside as well as I think you would on the white, this is personal preference though.
It doesn’t have funky LEDS or anything like that but again it’s personal preference, I prefer something sleeker.
The size could be an issue but it clearly states what fits inside so you can plan for this and this may be a benefit to those with limited space.
I appreciate the filters being removable to increase air flow when needed and obviously being able to remove the top to build is great but pretty standard. You can also utilise the velcro straps for cable management. Looking forward to playing around in this more.
I think for the price point its a great case.
Un ottimo case ma occhio alle dimensioni
Il case davvero ottimo, offre diverse possibilit di configurazione ed anche un discreto aiuto per il cable management, prima di acquistarlo per verificate bene le dimensioni, io volevo montare un AIO da 240ml nella parte superiore ma mi sono accorto che andava a sbattere contro le ram, nel mio caso ho potuto montarlo sulla parte frontale ma fate attenzione specie ai dissipatori a liquido.
This is the best building experience I've had.
Fractal design really released a banger, as is every one of their cases. Modern looks, great airflow, and no RGB which might make or break it for some. The only light on the case is a white LED that plugs into the front panel header on the motherboard – it can be set to a disk activity, a power on light, even a fan temp warning or whatever. In my opinion, the dark tinted glass side panel really ties the look together. I can see my debug LEDs on my motherboard through it, and it still shows the RTX logo glowing through it(anecdotal evidence.)
The toolless removal of the top, front, and side panels makes it such an enjoyable case to build in, however you need to have god tier cable management if you don’t want the rear panel to have a small gap. The god tier cable management is made easy by the well implemented Velco straps, which resulted in me being happy about it. The top I/O is also nice in the fact that to remove the top panel you don’t need to disconnect anything, it sits flush and just goes through holes in the top panel.
The power button is so incredibly clicky, a positive thing because it really solidifies the fact that you’re turning on a beast.
The mesh filters are really well implemented, no magnetic mesh that looks ugly, it’s all internal. And easily accessible. The bottom one slides out of the front of the case, the front panel is accessed by opening the hinging front door then removing it, and finally sliding the panel out of the top. The top filter is accessed by removing the top panel, and it simply slides back half an inch and lifts off, all without tools.
It is good to keep in mind this is an airflow focused case, not a quiet case. If you want the best of both worlds, grab 2 Noctua 140mm fans and 3 120mm fans.
Overall, it is a well made case and is easy to build in. My only problem with it that I have is the PCIe slot screws are hard to access with a GPU and the fact they are pushed in a bit, makes it somewhat difficult to access them with my particular screwdriver of choice.
Fantastic
Fantastic case, build quality, paint, and design is absolutely a cut above most cases out there. Due to it being so small, I recommend extremely careful planning of parts.
If you’re putting in something like a 20 series FTW3, get some 180 degree adapters or else the cables wont fit due to the width of the case.
If you want to use a 240mm AIO, check your offsets extremely carefully or it will hit the ram. The exact combo I used is:
– EK 240 AIO -> swap the fans with corsair 12mm slim fans
– TridentZ RAM -> fits by a hairs width due to the shape
– B550M Mortar Wifi
The other combo gearseekers used that works is:
– Lumen AIO
– TridentZ RAM -> fits by a hairs width due to the shape
– AsRock B550 matx steel legend -> this motherboard fits the ram a few milimeters lower so normal fans can fit
These two combinations are guaranteed to work but the margins are extremely slim.
Also, if you’re planning on using three front 120mm fans, be aware the most bottom fan will hit the rivets and wont fit depending on the fan type. I had to cut room in the frame of an arctic P12 for it to work.
Anyways, if you really want to just jam pack this tiny case with tons of high performance hardware, I hope these notes help. It’s much better to just go with aircooling and a normally sized card, but it can push it and provide air to some pretty large parts.