Maypole High Security Van Door Lock Transit Sprinter etc

Maypole High Security Van Door Lock Transit Sprinter etc (MP908)


Maypole SecurityMP908 Heavy Duty Van Door LockMP908 Kit

Fitting Instructions

1. Assemble and secure the lock onto the hasp. Select a suitable flat surface to site the product, checking that there is adequate access to assemble fixings and they are clear of wires or other locking mechanisms.

2. Mark the fixing centres with a centre punch using the holes in the hasp as a guide.

3. Drill 6 x 8mm holes to accommodate fixings.

4. Apply rust preventative treatment to drilled areas.

5. Affix the hasp to the surface to be secured using the fixings provided.



Weight: 2 kg
Dimensions: 10 x 10 x 5 cm; 2 Kilograms
Brand: Maypole
Model: MP908
Manufacture: Maypole
Dimensions: 10 x 10 x 5 cm; 2 Kilograms

13 Responses

  1. Charlie Sweatpants says:

     France

    Bien 90%
    Objet conforme la description.

    Aspect qualitatif.

    Facile installer, MAIS les 6 vis fournies sont longues et en filetage partiel !

    Pas de problme au niveau du rebord de la portire qui est plus pais mais ncessit d’acheter des vis courtes pour fixer sur la tle.

  2. stephanie says:

     United Kingdom

    Golden Review Award: 1 From Our UsersNice heavy duty item
    Nice item, fitted to 2 sheds to up security.

    Bolts are very long so you may need some wood to use as spacers on the rear.

    Just be aware these are useless on sheds unless you fit security screws to the door hinges too, the one way type screws are best but once in you wont get them out.

  3. Anonymous says:

     United Kingdom

    Golden Review Award: 4 From Our UsersStrong lock
    This is a strong and heavy lock for my Van. Seems to be a good buy. Only minor niggle is the heads of the bolts showed signs of rust only a couple of day after fitting. Still leaving a 5* review as it now blends in with my van.

  4. Anonymous says:

     Spai

    Robusto
    Ha quedado muy bien puesto en la furgoneta puerta lateral y trasera, se ve muy fuerte ,espero que sea suficiente para disuadir a los cacos, lo nico malo que en la primera lluvia se oxido un poco

  5. Anonymous says:

     United Kingdom 🇬🇧

    Van lock
    Bought it for the campervan easy to fit just that the screws are a bit too long other wise good

  6. SherriePederson says:

     United Kingdom 🇬🇧

    Looks good
    I love this lock. Fitted easily on the back of my Renault 3.5 horse box. Looks good. Unlock and use the door – plus lock up again – simple and quick.

  7. shelleyrae @ Bookd Out says:

     United Kingdom 🇬🇧

    Very strong
    A good layer of protection. These are much heavier and solid then you would think. They weight a ton. If you do not have the perfect space for the bolts like myself, you will have to use alternative installation methods. I had the driver and passenger door on a van that is offroad. Some local people from the YMCA started to use it as a night shelter among other things, broke the window etc. I put up cameras and these bolts. Some of the bolts fit, the others did not. I used heavy duty bonding sealant on them as well as on the sides of the doors to make it hard to try and open the doors. Works fine as the druggies are not well equipped or intelligent.With cctvs pointing right at the van at all angles (solar powered) it all adds to the layers of security. Layers matter.

  8. Anonymous says:

     United Kingdom 🇬🇧

    Value for money!
    Thought at that price it wouldn’t be that sturdy but it was really study and substantial.
    Very well made.

  9. Anonymous says:

     United Kingdom

    Fitted to my new shed now like Fort Knox!
    Had to get different bolts for my shed because the supplied bolts have a waste on them so not threaded all the way up, I needed to cut them and there wouldn’t have been enough thread left, not a fault of course just my situation needed shorter bolts, these locks are great quality very strong I decided to paint them brown to match my new shed plus hopefully they won’t rust, they do come with since plating which looks pretty good but I painted mine just so it doesn’t stand out so much on the shed, these are a great solution tamper resistant much better than traditional hasp and staple set up and reasonably priced for Amazo

  10. Anonymous says:

     United Kingdom 🇬🇧

    Shed lock.
    Used this as a cheap and secure lock for my old wooden shed.

    I bought the shed used and it had an old (and insecure) staple and hasp on the outside. (However it did have a series of heavy duty bolts on the inside?) I dont know what my shed did in its previous life but now its exciting ‘locked from the inside days’ are over.

    This lock worked out cheaper than a new staple and hasp, padlock and set of coach bolts as everything came supplied.

    If there comes a time when I want to upgrade the internal locks, I’d have no hesitation to get 3 of these.

  11. jeanelle says:

     United Kingdom 🇬🇧

    Golden Review Award: 2 From Our UsersSeems ok
    Will be ideal for shed doors etc, I bought this for my van doors but haven’t installed it, back plates are a bit rough so may take paint off, could do with a thin rubber backing really, also the shackle lock has a bit of loose play so would rattle on a vehicle, as I said though, this would be perfect on shed doors etc

  12. Anonymous says:

     United Kingdom 🇬🇧

    Good, sturdy and cheapest on amazo
    This is the cheapest i found on here so wasn’t sure if it was going to be any good. Once it arrived i opened it and to my surprise it’s built really well, lock is nice and sturdy and overall feels premium. 100% best value for your money.

  13. LashondPerivola says:

     United Kingdom 🇬🇧

    Golden Review Award: 10 From Our UsersVery impressed
    I am going to fit this to the inside of my rear doors on my van as I don’t like to advertise I have something I need to protect in my van. It looks and feels very tough so more than happy with it. I’ve had some advice which I’m going to follow and that is to get rid of the paint and use tiger seal/no nails to attach it to the door as well as bolts/tek screws. Anyone with an angle grinder can get rid of the head of bolts in seconds but somthing glued on as well will make it tougher for the little bastards