BERHICHAD Bicycle Holders Home Storage Rack Wall Mounted
BERHICHAD Bicycle Holders Home Storage Rack Wall Mounted Hanger Hook 2 PCS
This bicycle stand offers you the possibility to store your bicycle in a space-saving manner in your garage or basement. Front or rear wheels can be hung on the holding bracket. Use the included screws and wall plugs to quickly mount the holders to the wall. A practical plastic coating protects your bike tyres from scratches, and the holders are suitable for tyre widths up to about 5 cm.
| Dimensions: | 26 x 7.5 x 13.5 cm; 460 Grams |
| Brand: | BERHICHAD |
| Model: | HS-009 |
| Colour: | Black |
| Batteries Included: | No |
| Manufacture: | aomj |
| Dimensions: | 26 x 7.5 x 13.5 cm; 460 Grams |
These are great once up on the wall properly. I used the supplied screws and plugs and followed the instructions. After attaching the holder on a Brieze block wall and hanging up a bike the whole thing pulled off the wall. Rather than give up I tried some different plugs and screws and they worked perfectly. Perhaps just my bad experience but I would avoid using the supplied fixings.
4.0 out of 5 stars Sturdy and easy to install
These are a surprisingly hefty item considering the price and I am sure they will last a long time. Would be nice if the hook was able to be folded down when not in use but well made otherwise.
Definitely recommend getting your own screws as the ones provided are cheap and weak I managed to snap 3 out of 4 while installing.
Value and quality in one don't see that often!
No complaints at all staggered four of these up and down to overlap handlebars at different heights to save more space of bikes.
Found screws and fixing plugs just fine in a concrete block wall mo complaints at all good produc
Perfect for the job!
Bought two to test them out then bought 2 more. No more chaos of bikes leaning against each other when trying to leave for school / work and potential damage / scratches. Also think these might be useful when doing maintenance and cleaning.
Simple solutio
So easy to fit – but I did use a heavier gauge, longer screw in the top hole as it takes the strain. But I’ve used it on thermal wall blocks in the garage and they work fine (doesn’t have to be brick) – but I do have the back wheels resting on the ground so the weight of the bike is not borne by the fitting.
Great value
Impressed with the Quality
I have 4 of these on the wall and I was surprised how sturdy they were. I have 4 different types of bikes and they all fit perfectly and securely. Happy with this product and would buy again.
Does work
Does same job as Halfords ones but you get 2 for price of one. Make sure you install to wood if you have plasterboard walls otherwise will fly away … In no time
Very well made
Excellent quality, as I have stud walls decided that most of the weight is on back wheel on the floor, so did not suspend it too high…….as I only have 1 bike, I will give the other to brother as they come in a pack of 2..excellent value for money. can be a bit tricky getting front wheel into hook, so I may cut off 20 mm, as hook is very big for big tyres
These are brillia
I have four bikes in my garage which I have turned into a gym. These are sturdy, easy to fit and as I only have smallish garage the individual racks can be fitted in all the nooks and crannies. I larger rack would have taken up too much room
Ordered Agai
I installed into a block wall and it came right down. The wall plugs were useless. I replaced them with my own and it was good. A good strong product and I have ordered more, just replace the wall plugs.
Secure space saving bike storage
These went straight up into garage wall really easily with the wall plugs and screws provided. They are perfectly secure, holding my adult bike and my sons 20″ bike. I’m not worried about them coming away under the weight of the bikes.
They have helped create more floor space by getting the bikes vertical and lifted off the floor. They feel really sturdy and solid.
I’m really happy with these
Ideal
I now have 5 of these and they allow me to easily store our family bikes in a space where we have a lot of floor space but limited wall space.
Its easy enough for the kids to be able to take the bikes on and off the wall themselves and it also keeps our garage looking tidier than it otherwise would.
I would suggest using your own wall fixings as the ones supplied are a little bit on the cheap side.
Can't really fault them, worth the money for sure.
Can’t argue with the value for money, they are doing the job well. I had to come in at a slight angle to fit my 29ers on there when fully inflated. I may try bend the arm a little to make that easier, but the hybrid slips on and off without any issues.
The screws they came with are a bit cheap so I ended up using some decent ones I had and my own plugs.
All in all, good product and good price.
4.0 out of 5 stars Does the job. Use your own plugs.
Easy to fix however you might want to use different plugs than those that come supplied as I pulled the whole thing out of the wall very easily when my bike was loaded. Make double sure you’ve got a very solid grip when attaching these.
I’d have preferred the ‘hook’ to move a little as others I have used before but these are fine. I have both my bikes hung on the wall of my garage nicely with these.
Solid product but screws made of cheese
Just installed this to hang up my bicycle, it’s a solid enough bracket and good quality for the price, although if you have thick tyres, it might be tight getting it in to the hook where the flanges might interfere.
However the supplied screws are simply made of cheese. One head sheared off when screwing in to wood (pilot hole drilled in advance) and then the other screws started to round off very quickly. I would recommend using other solid screws if you have them available.
does the job but use proper fixings
The hanger itself works well, easy to install but the rawlplugs that come with it are useless so be prepped to provide your own that are appropriate for the surface you’re attaching too. I learnt the hard way.
Good value bicycle storage
Easy to install and good value for money. I would definitely buy again. This is the second pair of these that I have bought, the first pair are still going strong after a few years
Does the job in garage well
Works well. Can bit a little fiddly getting the bike in but that’s possible the hight and position I have installed them. Only used 3 of the screw holes and feels very sturdy.
I have a road bike on one and hybrid on other and they both fit well.
Just ensure you have enough room around and above and the bikes still take up a decent amount of space.
Works wells for road bikes, need to modify for mtb
These were very easy to install but one of the provided screws did snap while installing. Work really well for smaller tyres (road/ gravel bikes) but struggle to fit in large mountain bike tyres between wall and hook. I’m going to remove rubber coating from hook, cut 1/2″ of the hook and add protective tape to the hook again to make more space to slide tyre in and out of the holder (see you pic)
Was concerned about whether these bike holders would work on my WTB Trail boss tyre in 2.6 as the tread is very aggressive and due to a few reviews saying it’s a really tight squeeze getting the tyre and rim around the hook… It is and it isn’t! My first go I got it on but couldn’t get it off to which I then started to panic like a fool thinking my pride and joy is stuck there forever unless I hacksaw the hook away. Again foolish me wasn’t doing it right and with a bit of practise it’s on and off now in no time. If you have larger/wider tyres and rims like me the best way to get it on is holding the bike with one hand and the wheel with the other coming at it from an angle and hooking the rim around the hook first before positioning the bike parallel. I have fixed mine in position so the back tyre is fully seated on the ground so there is very little weight or pull on the hook and bike rim. It is right to left with the hook opening on the right hand side. Takes up very little space as you can see in the pictures and i just simply added a stud battern inside my shed for it to be fixed too and job done. I would definitely recommend these they seem a good solid build and perfect for what I needed oh and the price is ridiculously cheap!
Simple but effective I’ve managed to finally find a way to store our 6 bikes in less than 2m of wall space. The posh road bikes with carbon deep rimmed wheels are arranged so the back wheel sits on the floor, this takes any weight off the front wheel. The stronger mountain bikes are higher off the ground and hang there. These are all wood screwed into OSB board that lines the garage. Perfectly solid and quick and easy to remove the store the bikes.
You may struggle to get MTB tyres over 2.4″ or road bikes with anything deeper than 40mm rims in the racks. Excellent product for the money.
I bought these hooks to hang my and my partner’s bikes. Due to the weight of each, I opted to mount the hooks slightly lower so the back wheels of each bike rest on the floor. Something to think about it you don’t want to lift heavy bikes in winter when it’s cold.
The hooks are sturdy and very easy to install. Installation took around 15 minutes in total. I gave each hook a good hard pull before mounting the bikes and they seem very strong. The touring (black) bike weighs 17.5kg unloaded and I have no concerns about it taking the weight.
One downside to note: the size of the hooks is large enough to accommodate mountain bike tyres. If using smaller tyres, this means that there’s quite a bit of empty space (as in image 1) between the wheel and the hook which means the wheel is able to turn left/right slightly.
This is probably not an issue if you intend to place the hook high enough so the bike will hang, but worth noting if not. I’ll fix mine by padding out the hook with some pipe insulation to make it fatter.
Surprisingly string but difficult for thick MTB tyres
These are really good value for money. They are easy to install but I did have to use better rawplugs than the ones provided. They hold my road bike super easily and I can just about get my mountain bike tyres in (650b, 2.4″) in with a bit of a wiggle. Really reliable and holds the bikes securely.
Good but use decent screws and plugs
Once I got new screws and used decent Rawlplugs all good but those supplied are rubbish and finding that out created one dropped bike and redrilling to move points so doubled up work.
Also, watch out for wide rims on MTB as they don’t accommodate. Finally got all up and good once there.
For the price these are ideal for storing bikes up out of the way, the hook that holds onto the wheel is fixed into position so you can’t stow it flat when not in use which may be a problem for some but doesn’t affect me too much.
With 4 anchor points your almost guaranteed for a solid fixing, I would suggest using your own plugs & screws to install it, the supplied fixings weren’t adequate enough for my solid concrete walls (I opted for Screwfix Wall Anchors) again this is all subject to your needs.