COMFEE' 60 cm Visor Cooker Hood SLIF17SS-60 LED
![COMFEE' 60 cm Visor Cooker Hood SLIF17SS-60 LED Extractor Hood Under Cabinet Hood Wall Mounted Extractor Fan Kitchen 600 mm Top Vented Range Hood - Stainless Steel [Energy Class B]](https://k4s.uk/posts/wp-content/uploads/2023/04/21rhatQ4g2L.jpg)
COMFEE' 60 cm Visor Cooker Hood SLIF17SS-60 LED Extractor Hood Under Cabinet Hood Wall Mounted Extractor Fan Kitchen 600 mm Top Vented Range Hood – Stainless Steel [Energy Class B]
From the brand
Shop More
| Weight: | 4.7 kg |
| Dimensions: | 60 x 44 x 8 cm; 4.7 Kilograms |
| Brand: | COMFEE' |
| Model: | KWH-SLIF17SS-60 |
| Part: | KWH-SLIF17SS-60 |
| Colour: | Stainless Steel |
| Batteries Required: | No |
| Manufacture: | COMFEE' |
| Dimensions: | 60 x 44 x 8 cm; 4.7 Kilograms |
| Origin: | China |
Good Value
Installation was straight forward enough.
The depth is about an inch or two too much, so it doesn’t quite fit flush with standard upper cupboard’s.
The buttons are a little ‘clunky’ and the light quality is a little bit ‘blue’ but illuminates well.
No frills item that serves a purpose.
Twisted frame spoils the affect.
I bought this in a Amazon deal. It quite good, not very noisy on any of the 3 power levels. Easy to Install if your a competent DIYer. My only criticism is that due to it’s cheapness the the cooker hood is slightly twisted. When you look at its front line against the back splash tile line it’s noticeably different, and more so when it’s shodow is visible. I noticed this out of the box and was hoping that it wold correct once secured to the wall but no it’s still there.
Excelle
Excellent Product. Excellent Service. It was so easy to fit to wall, I got it for internal air extraction. The instructions are easy to follow, it works a treat, I tried the kitchen paper test , and it held it up no problem, it’s quite and the light is fantastic. It’s well worth the money. Thank You.
Neat and tidy item. Stylish, looks better in the flesh
Very pleased. Looks more expensive than it was. It Was good price too. Wish they had included filters. Didn’t know until I received it, then had to wait for them to be delivered. I ordered the carbon and white ones from Amazon and can get 2 out of the black bit and 4 out of the white bits. Was about 4.odd (quailitas was the make)
Works fine. but non standard outlet.
Easy to install, and works fine.
Biggest problem was the outlet connector. The built in ‘one way’ flaps, prevented a standard reducer from fitting, So I ended up 3D printing an adaptor/reducer to fit the flex pipe I had. I may have just been unlucky, but I removed one star because of the extra hassle connecting the outlet.
This product is really good quality it’s all stainless steel and replaced our old one but be aware that there is a lot of cutting and fettling if you are replacing an old unit, the external vent port was bigger than the original so it required an adapter to work.
Glad I gave this a chance as some reviews were off putting so didn’t know what to expect.
The cable is just shy of 6 ft.
It’s got good suction, not too noisy, bright led light.
Only negative is the rectangular rear vent, managed to find rectangular/round duct and with a bit of tweaking it’s sorted.
Nice cooker hood for the price
Compac
Very quiet at the lower fan speed with no vibration. Higher speed you can hear the blower. the extractor flu port hole has small tack welds that have to be broken to remove the blanking plate so extractor pipe can be fitted. This was a bit fiddly
Let’s face it , it’s a fan in a box with a few buttons, took about half an hour to fit but most of that time was down to the cable being too short, I simply cut off the cable and installed a terminal block inside the casement, not a lot of difference between the speeds that I can notice, not too noisy, light is only bright if your staring straight at it, I drilled an extra couple of holes in the back plate to make it more secure , all in all for the price you can’t complai
This extractor is a good, sleek design, in a matte black finish. The led light at the front, is clear and bright. The extractor is good, so no more steam in my face! It is exactly the right size, than goodness! It only seems slightly noisy, because you are directly in front of it.
Good produc
Looks good extracts well easy to install…..the only thing I would criticize is that the light is not especially bright which isn’t a major issue for me but it’s worth mentioning in case a bright light is what you need
Good suction power but switch stuck in extraction mode
Amazon cs recommended loosening the screw on the switch. In actual fact, you have to remove the screw entirely to switch to recirculating mode, then put the screw back on. The extractor itself has pretty good suction power and it’s almost half the price of most in that size. All good.