Motion Sensor Outdoor Security Light, 30W 3000 Lumen LED
Motion Sensor Outdoor Security Light, 30W 3000 Lumen LED Floodlights with PIR Sensor, IP66 Waterproof Motion Sensor Outdoor Wall Light with Remote Control for Garden, Backyard, Garage, Doorways [Energy Class F]
Weight: | 630 g |
Dimensions: | 22.5 x 18.4 x 5.6 cm; 630 Grams |
Brand: | Aomeya |
Model: | SU-FAK30GY |
Colour: | White |
Pack Quantity: | 1 |
Batteries Required: | No |
Manufacture: | Aomeya |
Dimensions: | 22.5 x 18.4 x 5.6 cm; 630 Grams |
Quantity: | 1 |
Straightforward enough to replace my old halogen floodlight with this one. The remote control makes it so much easier to set up than getting up and down to the light and adjusting small controls for duration and sensitivity.. Recommended.
Great, programmable via a remote control so you can change settings and overide on/off without climbing up to the fittings. I would have liked the lamp to rotate further down before the pir hits the wall though. Great long lead on it. Helpful if the connection box is inside rather than outside !
Had already installed one of these to rear of my house and was very pleased with it. So after ordering, installing a different make of security light to the side of my house which failed quickly and was returned I decided to purchase another one of these as seemed reliable and good quality. Very bright (have since fitted light dims to tone the glare down and stop dazzling my neighbours) and good control from the remote saving climbing up a ladder to adjust. Recommended.
This is a great light and 30w is ample. It is so bright and well made. Time will now tell but, it looks like it will last well in all weather’s. Can’t answer to longevity of the LEDs ye
Easy to install and remote set up a breeze.
Small, not in your face and powerful light output almost capable of illuminating my quarter acre back garden equals one happy purchaser.
Would recommend.
Great little floodlight – reasonable cable length, easy to install, lightweight, economical, very bright, and lights up a 40ft long driveway.
The only disappointment was that the website details said the remote control was “Wireless”, which to me means “Wi-Fi” or radio frequency. In fact it is “Infra-Red” like a TV remote. I chose this light because I thought I would be able to control it from indoors, as I did with my previous floodlight, without needing to go outdoors and get ‘line-of-sight’ to the sensor.
All that said, I am happy with the rest of its features.
Comes with plenty flex attached, is easy to install, the sensor works well and the light gives off a great light for my driveway also the remote control is a great set up feature, I’m an electrician so have fitted many similar lights but this is one of the easiest and great value for money
I recently purchased the Motion Sensor Light with Remote, and it has been a game-changer for my home. The installation was a breeze, and the remote control feature is incredibly convenient, allowing me to adjust settings without having to physically reach the light. The sensitivity of the motion sensor is spot-on, providing just the right amount of light when needed. It’s energy-efficient, which is great for reducing electricity costs. Additionally, the sleek design blends seamlessly with my home decor. This product not only enhances security but also adds a modern touch to my living space. Highly recommend for anyone seeking a reliable and stylish lighting solution!
This really is nice and bright. and the remote is very useful.
Downsides are:
An absolutely stupid design of bracket, or rather the way it attaches to the light. It has the usual screw with a knob attached to mount the light on to the bracket – fine. Unfortunately the light doesn’t have the usual threaded hole for the the screw, but a separate clip that has the nut thread on, and when tightened holds the whole thing in place. Problem with this design is that the clips will fall out while you are trying to mount the light, so it becomes a four handed job!
They need to redesign this or find away of holding the clip in place (hint try a piece of sticky tape or super glue.
The PIR is easily tiggered by blowing leaves, while other PIR lights are not triggered, the sensitivity buttons on the remote don’t seem to make a difference, but its very difficult to understand what the symbols used on the remote mean, a simple + – would have been better!. The ‘manual’ is no better in this respect.
Would I buy again? Maybe if they fixed the PIR sensitivity issue and the mount.
Easy to install but pity there is no user manual for – either supplied or online.
No idea how long it will last, but it’s good to have a remote control (not another one!) that makes it easy to set certain controls, but without a user manual, it isn’t that obvious what one/two symbols mean.
It seems to be well sealed – unlike other ones I’ve used in the past.
as reviewed night motion sensor doesn’t appear to work – have tried with remote control and at different levels – on remote only on or off appears to work -will try again from start to finish re installation and settings but will probably return and purchase a better product-after 2 nd attempt to install the product know appears to work – instruction sheet very poor indeed – trial and error the only way to establish function of product – light is bright and certainly does the job for which it is intended – rocket science not needed to install but patience required to establish that the product sensor does indeed work
Very easy to install thanks to the 1.5 m lead all set up ready to connect, the remote is a good idea and setting the light up through remote is easy to do, i will be buying another for the front of our property
Very simple to install.Screw to a wall with the 2 expanding bolts provided. (I used normal screw and plastic plugs) Fit a 13 amp plug to the 3 cables and away you go. I should point out that the cable is only about 4 feet long so may require an extension lead. Lighting is bright and the sensor is multi adjustable.
A good purchase at 19.99.
Bought to replace an old halogen bulb model. Nice white light and bright enough to light the whole garden. Pir sensor works very well and the remote control adds extra versatility. Would have given 5 stars but I think the cable needs to be 12 to 18 inches longer. I just about managed but others might not if their mains supply is a bit further away
Bought this to replace an old halogen style motion detection light, worked out cheaper to buy this than replace the bulbs in the other one! It has the added bonus of having a remote control, so you turn it on or off sat in the back garden and adjust the sensitivity.
The range of adjustments to sensor range and the time the light stays on is very good, the remote control makes it very easy to adjust the settings plus adds the flexibility to turn the light on to illuminate the area for as long as you want, convenient for me as mine is mounted at the rear of my property and can be used to light up the garden for late evening BBQs etc
Been using this now for a few weeks. The remote control is a god send. Got some washing on the line during the warmer evenings. Just turn it off so the motion isn’t triggered by the wind moving it. adjust the time with a click of a button. Entertaining. Just turn it permanently on with one click.
Now! My only downside. The sensor says 2-8 Metres. I don’t know if u have to continuously press the sensor down button to gradually shorten it but I can’t seem to work it out. It activates with my movement at about 5 metres at its minimum ( washing line is about 3 metres hence 2 would be fantastic). You do need a bit of movement to activate it. I think maybe a swaying bush could be ok to not activate. But a cat/dog would set it off.
Did not give 5 stars as I have not had it long enough. However, the remote is excellent and provides a more flexible use of the light rather than just using the sensor, which also works really well.
Pleased with the unit, delivery and packaging.
Light came complete with anchor fittings x 2 for wall, unfortunately only comes with a short cable and because its a sealed unit there is no way of replacing the cable, easily overcome by installing a junction box and adding additional cable on from there, bit of a pain if you don’t have the bits, doesn’t come with a plug.
Remote control makes set up so easy and eliminates the need to climb up and down ladders to adjust.
This light provides a bright and wide spread of light. The included remote, provides a long and overdue added extra, that makes the setting up of the floodlight, very much easier. The only problem I have with these mains fed LED lights, is they never reach their quoted end of life data. The last one we had, not this manufacturer, lasted three years just, when three of the LEDs in the array failed, making the light much darker, and only suitable for the bin!!! The light itself was totally sealed, so no repair possible. The quoted life of the light was 50,000 hours, I’ll let you do the maths.
Although the manual gives instructions on how to adjust the length of time the light stays on & how low you want the ambient light to be before the sensor kicks in, the diagram does not show the arrows referred to, nor the ‘sun’ or ‘moon’ indicators. So once you have installed it, getting the sensitivity & time it stays on is a bit of a hit and miss / trial & error routine.
I do like that this comes prewired & can just be fitted to a 13amp plug. Makes installation a lot easier than it used to be for these type of lights !