Power Corded Oscillating Multi Tool, Hi-Spec DT30301, 220W

Perfect tool for the job needed doing, not to be over worked continuously then it should las

So far tools used have been simple to use and performed well

i think for the money there is 1s out there with cases inclued with the price

Good value for the price and seems robust. Very straightforward to use but there is a learning curve to get full use out of it
No storage case to keep all the accessories together.

Value for money, comes with decent different types of blades. Only thing is it gets really hot really quickly! No idea why, gets so hot you can hardly hold it, which is very strange.

Really good multi tool and compares well with better known brands. I’ve used this for removing grout on mosaic tiles and it made the job simple. The power settings are ok, and on a low setting there was little vibration through the tool which makes it comfortable use. For the price this is an excellent addition to the tool shed

I purchased this many months ago in preparation for my bathroom, i wanted to remove the existing grout from between my tiles and re-grout the bathroom. There is nothing within the box / literature that gives you any advice on the tools [blades] included as to what their intended purpose is, though you can logically work out most. But a little research on line pointed me in the right direction and as i had read blades wear quickly i purchased spares in preparation. Now the unit itself is very much like a 4″/4.5″ grinder to hold and look at, i strongly recommend the use of goggles , dust mask and ear plugs. Because when being used this unit is quite noisy [just like a grinder is noisy] and does create a lot of dust but then that is only to expected as the job i purchased it for would be dusty anyway. Removed grout very quickly indeed but just have to be careful not to catch the tiles as this machine and it’s blades can damage them if used recklessly. But it did a great job for me, dug out and re-grouted a bathroom wall in a few hours. A longer cable would have been helpful as when you are working at the top of the wall close the ceiling the cable does not reach the floor so you are also lifting the weight of an extension socket unless you can raise it up and place it on bench which is not easy in a standard bathroom [a board across the bath helped me cope with that issue]. it has allowed me to do what i wanted quickly so i am more than happy, just a shame the noise cannot be reduced. Hand/Arm vibration would be an issue if using this unit for extended periods but for home use this should not be an issue. For industrial use you would need to be very wary of this in respect of H&S requirements.