SUNLU 2KG 3D Printer Resin, Standard Photopolymer Fast
SUNLU 2KG 3D Printer Resin, Standard Photopolymer Fast Curing Resin for LCD/DLP/SLA Resin 3D Printer, 405nm UV Curing 3D Printing Resin, Low Shrinkage, High Precision, 2000g 3D Resin, Grey
From the brand
Special Colors 3D Filament
| Weight: | 2 kg |
| Size: | 2KG |
| Dimensions: | 33.79 x 21.4 x 9.5 cm; 2 Kilograms |
| Model: | SUNLU Standard 3D Printer Resin |
| Part: | SLUK-RESIN-GR-2KG |
| Colour: | 2kg Grey |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | SUNLU |
| Dimensions: | 33.79 x 21.4 x 9.5 cm; 2 Kilograms |
| Size: | 2KG |
Love the way this turns out. Looks so great. Picture is zero touch up after the wash and cure. Wash in ipa and cured on my geeetech station. So nice
My print with this was more functional than for fine detail, but the print size is quite large. I used this on a Halot Mage Pro and the overall weight was 1.8kg for the finished print. The print was stable on the print bed while coming off the FEP easily. Very good stuff, will buy again!
I am used to using the more… tenacious and ABS like resins, this works out roughly half the price of the stuff I usually use. It has a much thinner viscosity compared to a lot of other resins and a slightly faster cure time (2.5s on a Saturn S seemed my sweet spot after tuning)
It is not something you would want to make a functional part or something that would have any stresses put on it. For miniatures and decorative prints it is great, although I would be more mindful if dropped it has a risk of shattering.
Cured parts seem to glue really well with just basic cyanoacrylate superglues, and sanding with emery boards leaves a great finish without too much extra effort too. First 2000ml bottle has lasted less than 2 weeks. 2 more bottles ordered…
i given this all stars cause this is the sic time i got this from this seller. i am happy with it. its nice for the price tag. i just need to get my settings right. but it is a low Oder kind of. i guess. not as bad as others.
and it does give nice detail. i just need to work on my settings as i get warping. but other then that yes i buy again when i run out.
This resin had become my first choice since it was cheapest and worked well. But not it’s basically same price to other resins I have used I’m not sure I’ll keep using it. Maybe company got greedy? Not sure but seems abit of a bad move.
This resin creates very durable models, though the supports can be hard to remove; I recommend using this resin 4 parts to 5 with another resin, black creality I found is good.
Getting excellent print quality straight away. No failed prints so far.
I print 3d character busts so that I can later paint them. I have purchased sunlu blue and red clear colors, as well as solid white, gray and black. I like that the odor is not too strong and I have been getting good prints with the resins and have different settings that are dialed in for my printer that have been tested with the cones of calibration. All the bottles I have had in the past were SUNLU 3D LCD printing bottles. This one however has a different label missing the 3D LCD printing logo on the bottle. I don’t know if I got a knock off or what but it does not come close to the quality of all my other resin. I can’t get it to print and stay on the plate, I have increased my base layer exposure times and even increased my normal layers to 4s exposure, lowered lift speeds and retract speeds for base and normal layers to 50, increased light off delay for both layers and you can see the results it just sticks to the FEP. Then I have to cure and clean the wasted print off and try again. Sending it back, not sure what to buy now because I don’t want to add over an hour to my prints to just get it to possibly hold on the build plate, then fall mid print. I’m glad this isn’t my first bottle ever, I would go crazy wondering why my settings don’t work, I am 100% certain this is due to the resin as my calibrated settings worked great for the other white SUNLU bottle I had.
I have to say, it performed pretty well overall. The quality of the finished prints was good, and I was able to achieve a high level of detail and precision.
The resin itself is easy to work with and has a decent curing time, which allowed me to create several prints in a relatively short amount of time. The color of the resin was also accurate to what was advertised, which is always a plus.
However, I did experience a few issues with the resin. Firstly, the odor was quite strong, which made it difficult to work with for extended periods. Additionally, the resin is a bit brittle once it’s cured, which made it somewhat difficult to remove from the print bed without damaging the print.
Overall, while the 3D printer resin did have a few drawbacks, I think it’s a solid choice for anyone looking to create high-quality prints with good detail and precision. With a little bit of patience and practice, you can achieve some great results with this resin. Four stars!
I love it. My first print was already a success. I was also surprise how low is the resin smell.
found this to be a reliable resin, with very nice print quality and reasonable flexibility. I have used this for printing tabletop miniatures and it is perfect for this
En espera de que est nuevamente disponible para comprar ms
Mis impresiones han sido excelentes y el precio fue fabuloso.
Brought this recently as new to resin printing. Found it was easy enough to use. Arrived will packed.
The finished result on my printer looked good. Id say its probably a tad expensive at the full price of 25
Excelente resina, es la primera que uso, imprim miniaturas para juego de Rol y todo excelente. El detalle es brutal.