Bath Repair Kit White, Endhokn Enamel, Porcelain, Acrylic
Bath Repair Kit White, Endhokn Enamel, Porcelain, Acrylic, Fiberglass, Ceramic Sink Repair Kit, Tub Tile Ceramic Toilet Shower Kit & Tray & Chip & Pedestal Crack Hole Scratches Repai
From the brand
Bath & Leather Repair Kits
| Weight: | 100 g |
| Dimensions: | 14 x 8 x 4 cm; 100 Grams |
| Model: | HA100W |
| Part: | HA100W |
| Colour: | WHITE |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Hangzhou Guyang Technology Co., Ltd. |
| Dimensions: | 14 x 8 x 4 cm; 100 Grams |
Appears to be epoxy with white colouring mixed in. Too white even for a new shower tray, the secret is to mix in a bit of ash from a burned incense stick (I used Sataya Dhoop cones). The ash is very fine and has subtle grey and yellow tones which when combined with the paste can be added until you reach your desired colour. Trust me, I restore antique varnishes for a living, I can’t even see the chip repair now.
Easy to use, works as expected,
Dries within 24 hours, had to renew after 2 months but a little goes a long way so I still had some left
My bath is in super bad condition though it might last longer if it’s not that bad
Took a chance on this product and it paid off big time, renting a property and broke the bath bottom with shower bottle 14 later it good as new at it was a big hole not a crack I started off with building up bit at time i gone over three times over 4 days it now good as new can’t even tell it’s saved my moving deposit. Just be patient don’t rush i
I found myself in a standing order for ceramic kits ??? I only wanted 1 I’ve now received 5
For heaven sake Who orders SO for these kits
Outrageous I hope I’ve solved this nonsense
Now !!!
Used this as thought give it a go in the short term and then replace bath.
Comes with all you need, tape, mixer, resin, spreader and even a waste bag.
Bit of prep makes this easy so do the pre work and take time masking to the area needed.
All done in 10 mins, left overnight and went to check in the morning – and took me ages to find the thing. It has blended in so well and thansk to the prep there was minimal overfill on the hole. I decided not to the smooth down after as I really could not see it and challenged the big boss to find it and she could not so i was in the good books – whats not to like!!!
Colour is too white for porcelain sink but fixes the crack perfect so I don’t mind! I did two layers just to be sure and it did a perfect job
I have crack in the sink around 10cm long which spider webbed in pattern. This product arrived the next day, contains clear, easy to follow instructions and was effective. The sink looks much better and the crack isn’t visible as much now – it previously filled with dirty daily making it show loads. Now there is a slight colour difference but otherwise it’s not noticeable
I did use to fill small chips in bath and shower tray and didn’t bother to sand back afterwards. After some time I can now easily see the repair as there is a bit of a colour difference between this and both the bath / shower tray. I think therefore that it is a good idea to ensure you always sand this back once its cured (after about 24 hours).
We had a new bath, our bath chair scraped it and put a nasty dent in it. I applied ample coatings of this (far more than the instructions said to). I think I did 2 coats per day for 3 days, so I probably did 5 or 6 coats in total. Because I did so many coats, the repair is noticeable, but since this was damage to the bottom of the bath, I wanted it to be durable because it would be covered in water. A few months later, it’s still perfect, haven’t had to apply any more coats.
If you follow the instructions and apply only a couple of coats, and use the sandpaper, maybe it’s not noticeable, but I didn’t want to do that because, as I said, I preferred to have it work and wasn’t bothered with the aesthetics.
This kit is great! Simple as that. Easy to use,straight forward instruction and colour match is almost perfect. The wife couldn’t find the repair 😉 o that’s saying something. Mid price range, but so worth not purchasing some cheaper inferior product. Well worth the extra few, and only a few pounds more. Great finish. Very happy.
I used this on some rusted holes in my bath’s enamel; the colour didn’t fully match my bath and the density of the colour didn’t stop the dark of the metal beneath showing through the repair but it looks much better than before treatment and I no longer have to worry about the bath unexpectedly emptying when the hole rusts through !