Creality Official Ender 3 LED Light Kit, 3D Printer LED
Creality Official Ender 3 LED Light Kit, 3D Printer LED Light Bar 24V 5W for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo
| Weight: | 200 g |
| Dimensions: | 39.5 x 6.7 x 6.6 cm; 200 Grams |
| Part: | Ender 3 neo LED |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Creality 3D |
| Dimensions: | 39.5 x 6.7 x 6.6 cm; 200 Grams |
| Reference: | Ender 3 neo LED |
Easy constructio
Delivered promptly, as usual from Amazon.
Frame is easy to assemble. I have seen reviews where the user complains of breakage when constructing the frame or the cover does not fit.
With a little patience, a dab of lubricant (washing-up liquid) a steady hand and gentle tapping the frame assembles easily. The joints must be fully home to enable the cover to fit easily.
When constructed the cover is sturdy and excellent for my Ender-3 Pro.
Very pleased with this product, and would recommend.
Tight but looks good!
I bought this for my Ender 3 S1 Pro.
As others have noted, it is a very tight fit to get the frame into the casing, when I first lined the frame up I genuinely thought that there was no chance it would fit, but I gave it the benefit of the doubt and, to my suprise, it did fit!
It was tight though, you have to kind of nudge one side in, then the other, rinse and repeat. I think one reason is that the casing comes all folded up and as you pull it over the casing, it opens the casing up more (kind of like how a fresh t-shirt out of the washing machine seems small until you wear it for a while).
Anyways, it’s constructed now and it looks awesome, the zipper goes from the front (near the bottom), all the way up and across the top to the top-back so you can get to your filament spool.
I haven’t put my printer inside yet but will do so tonight and update once I have my desk rearranged to take this enclosure.
It's a definitive improvement on temp and smell for the room.
I’ve used this for the past week or two and I have seen a remarkable difference in the temperature of the room outside of it. The tent DEFINITELY changes the way the room feels and smells. I don’t have any eye irritation anymore and I have yet to use the small fan vent port on the right side (you have to buy that version of it to have it come with). I’m just hobbying and the side pouch holds quite a bit for its size and it’ll almost fit a kilo spool of filament.
does the job
i need a cover for my ender pro v3
it arrived in box and one opening there is some assembly to do, assembly was easy enough and once up is a lot more stronger and durable than it looks. it offers good protection for your printer helping to reduce dust on the printer and other issues. the large zip opening allows full access to the printer for when you are using however it can be closes during use to help keep draft and dust from print bed and nozzle.
over all does the job well
Quality, well designed item.
Quality item, easy to assemble as long as you make sure the rods are fully inserted.
These things are big however, and tend to dominate the work area, I may yet remove the floor from mine so I can quickly pop it on and off when not needed.
Very happy
Purchased for my ender v3 KE fits inside with no problem, read the other reviews people advising of the frame breaking or does not fit, having 2 people is a big help really to get this to fit and building the item is common seance however just watch the dimensions of the frame im pretty sure people are building incorrectly
Ender 3 S1 plus enclosure
I got instructions with mine – although they were tiny so couldn’t quite work out the image, I enlarged it on my phone.
Didn’t take long to put together – just makes sure the poles are proper pushed into the fittings so it’s all square before attempting to get the cover on.
Works well, reduces printing noises, keeps dust out.
Hole for plug at the back – pocket on one side and a flap to get in too on other side too if needed.
Glad I purchased – definately recommend, good quality and well made.
Metal frame version is quite sturdy, works great for ABS prints
I got the “Middle” version, which is a bit more expensive but has a fully metal frame and that was simple to put together, but I struggled with the cover a bit.
A few reviews complained that the cover was too small for the frame, but I think they either put the cover on the wrong way or didn’t insert the metal rods all the way into the connectors.
My Ender-3 V2 printer fits very well inside even with the filament spool on top, and I have since done a couple of ABS prints inside and they came out perfectly!
I wish the front side were a bit smaller, but I suppose this way it can work with any printer!
Take your time
Firstly, be careful cutting the tape when opening the box, a cardboard liner has been added under the flaps when the box is in the correct upright position to facilitate a knife cutting the tape. I purchased two enclosures, one box had the liner on what would be the bottom of the box, not the top.
Secondly all rods in the same pack will attach to each other to make 4 of each length.
The ” instructions ” do work , and will show which rods in their correct orientation, take time to notice which rods connect to what 3 way corner connector..
Fiddly to build, but kinda cool when fully assembled.. I’m happy with the resul
Great quality kit for a great price!
Amazingly durable product. I was well overdue with sorting out my ender 3 printer. Now that I’ve replaced parts using this kit, my printer is working better than it was when I first got it! Deffo recommend getting this if you haven’t upgraded these components on your ender printer yet!
Not quite the same as the video, wear gloves when assembling
seems sturdy, well sized for ender 3 – though just to note that the package is much smaller than the video, and the fiberglass poles all come half the size with central connecters, instead of full length as shown in the video. Doesn’t seem to affect the sturdiness of the design though. all connectors are solid enough.
A word of caution, wear some gloves when assembling. Although the rods appear to be totally smooth, I felt some nasty pricks in my skin after putting together the first few pole, and after removing a few of the more obvious tiny splinters in my fingers, realised there were many shiny specks on my hands from handling the tubes.
Does exactly what you wa
Easy to set up has everything in the correct place.. I have it with a ender 3. Perfect.
Small note is it is big so check dimensions on the shelf/ desk where your going to keep it. Just fit on mine
Massive improvement to both bed and extrusio
100% worth the money, the springs are a such an improvement I haven’t had to level my bed in forever since installation really wish I had upgraded them long ago, so much time wasted, extrusion is strong and my gear was worn before and this set was a great combo for replacing that and the upgrades for a very enticing price, installation wasn’t too hard eithe
great at keping heat in and reducing electric bill
I bought this as i have my printers in the shed which get cold in winter thus using more power to keep bed and hotend hot. using this enclosure greatly helps to keep heat in the printer area to roughly 20 degrees when it is 3 degrees outside. I like that it keeps the smells from spreading throughout the shed when i am doing other things. I also have another enclosure which i am using as a grow tent for plants as it was cheaper than buying a dedicated grow tent but basically the same thing.
Difficult joints
Difficult joints to put together, require some serious force to get the tubes to butt up and one broke when while pushing it so hard, if they made the white joints just a little bigger so the poles slide in with no effort it would be 5 stars as the material feels good and thick and looks good once together, if you can get the joints butted up without them breaking or print new ones that will slide on the tubes and its good value for money overall, just let down by the joint component.
Another Quality Item From Creality
Creality are a company that shows the quality and reliability that CAN be achieved by Chinese design and manufacture. Along with DJI (designers and makers of high-end drones), Creality, one of the leaders in affordable 3D printers and accessories produces top-notch equipment at a very competitive price point.
This cover is constructed of a substantial fibreglass frame with a heavy duty black cloth outer. The inside of the cloth is coated with a reflective layer. DIY construction is simple, the frame using push-fit connectors throughout. The cover fits easily over the frame thanks to handy zip fasteners.
The cover is a generous size, allowing for access to all sides of the 3D printer inside. There’s a handy inlet for the power cable, and plenty of room to clear the top of the filament roll. A pocket on the outside of the cover provides storage for those bits & pieces you may otherwise lose, and the front of the cover has a large transparent window so as to observe the printer without having to open the cover.
The cover serves to protect the printer from dust and to help deaden the sound during printing.
A great buy at a very reasonable price. Highly recommended. AAA+
Essential Ender 3 upgrade, Vital for constant printers and dark rooms
Some pretext, I have an ender 3 that I have modded over the years, and set up a pi-cam to record prints, however, as most of my prints happen overnight I found an issue with the lack of light. This led me to search for alternatives that would help light up the printer.
Easy to install 3
Quite easy to install. Was able to put it together in 15 minutes with no hiccups. Although I was scared that I was going to snap it, the quality of the light is high in terms of light output but the physical parts felt pretty cheap. If you need more assistance in installing it you can search for some videos on youtube that will help if the manual isn’t easy to understand.
Brightness 5
Super bright and perfect for lighting up the entire print bed. This will ensure that your prints will be perfectly lit.
As seen in the image it won’t light up the entire room since it’s just lighting the area beneath. But I would’t use it in your bedroom if you’re trying to sleep. Might as well also get an enclosure to keep the light contained.
Overall, helpful if you print at night like I do.
Unterschätztes Upgrade für den 3D Drucke
Wer kennt es nicht. Endlich die Konstruktion fertig, ab durch den Slicer, SD-Karte rein und dann dass unablssige starren auf den First Layer ob er wirklich gut wird. Und dann sieht man wieder nix weil es schon lange dunkel drauen ist oder man hockt so oder so in seinem Hobbykeller.
Hab mir die Beleuchtung fr meinen Creality Sender 3 V2 Neo gekauft und seit dem ist Schluss mit dem Rumgeleuchte” mit dem Handylicht. Einfache Installation, hochwertig verpackt und leuchtet die Druckflche schn aus ohne zu blenden. Wrde ich jedem dem sein Drucker nicht in der hellsten Ecke steht weiter empfehlen.
Sinnvolles Upgrade, einfache Installatio
Das fehlende Licht hat mich schon lnger genervt.
Mit etwas Geschick ist die Leuchte schnell und unkompliziert installiert.
Sie sieht super aus und leuchtet den gesamten Druckraum gut aus.
Excellent upgrade
This is an excellent upgrade form the standard ender 3 components. The springs are great I used to have to level my bed daily but now I don’t. The extruder has made a massive difference to my prints the are smoother and less stringing. This is a great cheap upgrade for the ender 3 would definitely order it again if needed.
Accessoire au top
Installation facile, intgration magnifique. C’est la position de l’clairage dport sur le devant de l’extrudeur et donc la zone d’impression qui m’a fait privilgier ce modle.
5.0 out of 5 stars Easy fit and good quality.
The kit was very to fit and the instructions clear. A good upgrade to the printer.
Would but again.
Endlich vernünftiger Stream
Um die Drucke im Auge zu behalten, ist natrlich eine Kamera installiert. Diese konnte die Drucke ohne die Lichtleiste nur selten gut erkennbar zeigen, da der Drucker in der Ecke steht und Licht nur in kleinen Mengen dort ankommt. Mit der Leiste hab ich ein klares Bild und kann Fehler frhzeitig erkennen, ohne aufstehen oder zu Hause sitzen zu mssen.
Die Installation war einfach und Kompatibilitt auch fr den Ender 3 v2 Neo super.
Die Leiste ist hell ohne zu blenden und sieht sowohl angeschaltet als auch ausgeschaltet gut aus.
Die Kabel sind weitestgehen versteckt, dank der Mitgelieferten Kabelkanle, nur an der Oberseite kann ein wenig rausschauen.
Alles in Allem klare Empfehlung.
Beleuchtung Ender 3
Die Zusatzbeleuchtung lie sich nach der Anleitung ganz einfach montieren. Ich habe meinen Ender 3 in dem passenden Gehuse eingebaut. Mit der Zusatzbeleuchtung wird der komplette Druckbereich wunderbar ausgeleuchtet.
Richtig Schön Hell
Ich habe diese LED Leiste bereits bei meinem Ender 3 S1 Pro im Lieferumfang enthalten gehabt.
Die Montage und der Anschluss waren mehr als einfach!
Die Beleuchtung der Druckplatte mehr als zufrieden Stellend.
Die Beleuchtung hat mich so berzeugt das ich meinen lteren Drucker, einen Anycubic Mega S mit dieser Leiste nachgerstet habe.
Dazu ist zu sagen das meine Drucker je in einer IKEA Umhausung stehen und das Licht dort erst Recht von Vorteil ist.
Ich kann die LED Leiste nur empfehlen.
5.0 out of 5 stars Brilliant LED lighting for your Ender 3….
Firstly yes you can DIY a light bar and maybe save a few pounds. But this complete set from Creality is perfect and compliments my Ender 3 v2 perfectly.
Great quality but cold sheet didn't work for me
I was dubious about not requiring heat for adhesion with PLA filament and looks like I was right. First print appeared to stick at first then fell off when the weight got out of balance. Tried at 60degs as per usual and adhesion no problem.
I will try again cold in the summer when the ambient temperature in the room is higher.
Still happy with purchase as it’s a great, quality product.
Nice upgrade, would recommend
Pretty easy to fit and makes loading filament much easier. Look at the official installation guide not the generic ones kicking around the Internet. This will make the install much easier!
Why no instructions???
I had a strange desire to replace the springs, adjustment wheels and extruder on my Ender pro 3 3D printer. I am assured that these springs ensure the platform stability is better than the old ones and that the metal extruder performs far better than the plastic one that it replaced. I must admit that shiny red anodised components also look very cute on the printer. There may be those amongst us who can just assemble all these components and work out how to fit them to a printer, but I am not one of those. It does seem strange that no instructions are included for assembly, but this is easily remedied by looking on YouTube where instructions for fitting these items are readily available. It took me about an hour to install the new springs, wheels and extruder and probably would have been even quicker without the traditional glass of scotch, but I felt that I deserved it. Anyway, everything is working perfectly now, so hopefully this should improve my 3D prints.
Great kit. The springs and wheels are worth the price alone
If you want a level bed and great prints, you need this. The springs and the tuning wheels are worth the price alone. They allow for a stable bed, and when combined with a glass base it makes for a great printing surface.