eSynic 10″ Hand Rivet Nut Gun,Heavy Duty Hand Riveter Kit

eSynic 10" Hand Rivet Nut Gun

eSynic 10″ Hand Rivet Nut Gun,Heavy Duty Hand Riveter Kit Rivet Nut Gun Set Rivet Nut Gun Tools with 100pcs M3 M4 M5 M6 Rivet Nut and with A Rugged Carrying Case


From the brand

eSyniceSynicNICRivet Gun Kits, eSynic Professional Green Pop Hand Riveter Set Heavy Duty with 200pcs Manual Inte...eSynic 10Rivet Nut Gun, eSynic 13eSynic 100 Pcs Heavy Duty 10Rivet Nut Gun,eSynic Professional 10Heavy Duty Rivet Gun, eSynic 360° Upgrade Version Hand Riveter Set with 200PC Rivets 3.2mm 4.0mm ...


Weight: 1.36 kg
Size: 10 inch
Dimensions: 34.79 x 17.6 x 5.4 cm; 1.36 Kilograms
Model: Hand Rivet Nut Gun
Part: Hand Rivet Nut Gun
Colour: Blue
Pack Quantity: 1
Batteries Required: No
Batteries Included: No
Manufacture: eSynic
Dimensions: 34.79 x 17.6 x 5.4 cm; 1.36 Kilograms
Quantity: 1
Size: 10 inch

16 Responses

  1. MavisWalls says:

     France

    Facile utiliser pour un nophyte comme moi qui en fera un usage ponctuel. Pensez proposer clairement les vis adquates. Pour ma part j’ai trouv aisment dans une enseigne de bricolage.

  2. Kellie Ell says:

     United Kingdom

    Bought it initially to put some rivnuts in a bike frame. Did the job admirably. Its a well thought out kit and sturdy. With trial and error you can adjust the levers for one handed or two handed operation but its best to practice on a couple of holes to get the strength right especially on the smallest rivnut. On the down side the instructions aren’t very clear.

  3. Susan Elkin says:

     France

    Pince de bonne qualit. Bonne prise en main. Utilise pour poser des rivets M5 sur mon vlo afin de fixer un support de batterie et une pompe main.
    Un outil fort pratique pour des besoins divers et varis.
    Les rivets fournis sont conformes la photo et de bonne qualit.

  4. NatalieBiaggini says:

     United Kingdom

    Only needed 2 but brought this kit as figured it would always come in handy. Fitted on the motorhome to keep the door keeper thingies in place. They were previously held by pop rivets but these are a much better solution!

  5. LurleneVIW says:

     United Kingdom

    I have already used this riveter to fit four M5 threaded inserts to my bicycle frame to support a large e-bike battery, and it did the job flawlessly. The gun provides just the right amount of leverage to properly install threaded rivets up to M6 size, and unlike some larger guns that can take larger M8 and M10 rivets, this smaller gun will not provide too much leverage and snap the tool in the way some customers report for those larger guns used with smaller rivets. Its very easy to tell when a rivet is fully compressed and at this point you should stop applying more pressure as you may break the tool. This is an excellent product when used properly and I am finding new places to install threaded rivets to mount bicycle accessories and don’t know how I managed without one. Highly recommended.

  6. Anonymous says:

     United Kingdom

    I needed to attach a pair of casters to a ceramic heater only provided with a wall mount bracket as we needed it to be mobile,
    The kit worked well, i was able to attach the casters firmly to the base, we can now move it room to room no problem & sturdy with it.

  7. CheriForeman says:

     United Kingdom

    No complaints, I wasn’t expecting professional quality, but this is perfectly adequate for most users, the rivets will work just fine as long as you don’t overtighten the screws that you subsequently use in them. I don’t understand people who pay for a cheap product and then complain that it isn’t high end professional kit.

  8. Anonymous says:

     United Kingdom

    Wanted this to add a replacement bottle cage boss to my bike frame to replace one which has a striped thread- worked perfectly and very easy

  9. JuanaLindsey says:

     United Kingdom

    I manage to install water bottle cage mount on my bicycle using the rivet gun. I had to watch videos on how to use . It could do with a very well descriptive manual.

  10. Anonymous says:

     United Kingdom

    Good tool for doing the job I bought it for. Won’t be using it a lot so good enough.

  11. Emma Harris says:

     United Kingdom

    Very impressed with quality for price. I bought this because it was cheap and expected to bin it after I’d finished the project I was doing. It’s actually a great little tool, well made and strong, so has taken pride of place in my toolbox. Everything but the tool itself isn’t great quality, I had some rivnuts already but if I didn’t I wouldn’t have used the ones supplied and the box is your standard plastic nasty

  12. Anthony John Agnello says:

     United Kingdom

    ice looking tool very sturdy dose not come with instructions pity but good tool all the same

  13. BarrettTCGT says:

     United Kingdom

    This rivet gun was bought to fix the number plate on the car and it worked great as the inside is threaded and you can screw coloured plastic number plate screws into it .

  14. Anonymous says:

     United Kingdom

    Golden Review Award: 2 From Our UsersI already own a 2 handed rivnut tool but got this as I needed to use it in a tight space, I was expecting it to be difficult to use as there is much less leverage involved than the 2 handed type. But I was surprised it worked quite well. There is a mistake in the listing though the rivnuts supplied with the tool are steel not aluminium, not a problem for me as I was planning to use the steel ones I already owned anyway.

  15. Anonymous says:

     United Kingdom

    I used this rivnut gun to put insert on a chassis frame of 2mm thick steel. Did the job perfectly well – the bigger inserts require a bit of effort but thats to be expected. Gun works perfectly.

  16. LashawndaBrobst says:

     United Kingdom

    This kit looks very sturdy, did not get a chance to use it after all as on first place I planned to the material turned out to be too thick. However very nice box to keep it organized till next time. Good value for money.