NYCENT Shower Door Seal Strip for 4-6mm Glass – Covers up
NYCENT Shower Door Seal Strip for 4-6mm Glass – Covers up to 20mm Gap – Perfect Transparent Shower Screen Seal Replacement with 90cm Adjustable Length (Straight)
| Weight: | 60 g |
| Dimensions: | 90 x 3 x 1 cm; 60 Grams |
| Model: | AA2021 |
| Part: | FD-ZJ-221110-128 |
| Colour: | Transparent |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | NYCENT |
| Dimensions: | 90 x 3 x 1 cm; 60 Grams |
The curve was exactly right for our curved shower door, and the fit is nice and snug, it won’t come off accidentally. I liked the double blades at the bottom which neatly fill the gap.
Very easy to install – simply measured the shower screen and cut the strip to length with a pair of heavy duty scissors. No extra sealing / adhesive needed as the strip grips well to the shower screen after sliding on.
This seal is ok but considering the average length of most screens it could be a bit shorter. I nad to cut about 6″ from mine which is a waste. It could be shorter and a little cheape
goes on easy but the lower part which contacts the bath seems a bit flimsy and not firm, does the job but seems expensive for a small piece of plastic
Tried putting on but followed instructions and it went ie warm it, didn’t realise how much the old seal had collected with the new hinge,looks like brand new shower uni
It did the job but it is very difficult to fit around a glass thickness of 6mm or more, as it is a very tight fit, so you need to be careful when fixing it. It took me 5 mins or more, fiddling around to get this in. But it is working with a great seal and has not caused any problems. It is easy to cut to the correct size too.
Good quality product arrived promptly and well packaged . The narrower fit suited our “sail” style screen. Easy to fit to correct size & stays in place . Keeps the water on the right side of the shower. Highly recommend.
And – there’s no way to install this without soaking a bit first, so don’t try it. A tiny touch of dishwashing liquid helped force it onto my 6mm glass, but now it’s there- it looks really good AND seems to not be letting water into the seals and building up limescale like my old one, which I was frequently pulling off to clean.
It’s been a couple of months now and still looks brand new, so that’s worth the extra effort.
Seals very well indeed, and on the whole I’m very happy
It wasn’t easy to cut it to size just with a pair of sharp scissors but did manage it eventually.
It fitted perfectly to the bottom of my shower screen but as the plastic is so soft, one end of the outer of the two strips (the deeper one) keeps curling inside towards the middle of the inner strip. I have to flick it back out every time after each time I open and close the screen so that the outer strip rests smoothly on the edge of the bath.
Very easy to fit onto the shower door unlike the last one I had.
Needed shortening 4cm unable to cut it with scissors had to use a Stanley knife.
Perfect fit and perfect price.
Saying that, once we got it on it looked the part and hasn’t moved at all. Not the easiest thing to cut through either, even after soaking in hot water.