SUNLU 3D Printer Resin, 1KG ABS-Like High Toughness Resin
SUNLU 3D Printer Resin, 1KG ABS-Like High Toughness Resin for 4k/6k/8k LCD/DLP/SLA Resin 3D Printer, 405nm UV Curing 3D Printing Resin, Good Resistance, Non-Brittle & High Precision, Clear 1000g
From the brand
Special Colors 3D Filament
| Weight: | 1 kg |
| Dimensions: | 23.7 x 14.81 x 7.39 cm; 1 Kilograms |
| Model: | SUNLU ABS-Like 3D Printer Resin |
| Part: | DCDE-RESIN-AL-CL-1KG |
| Colour: | 1KG Clear |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | SUNLU |
| Dimensions: | 23.7 x 14.81 x 7.39 cm; 1 Kilograms |
Gratamente sorprendido. En 2Kg de producto no ha fallado ni una sola impresin. Las miniaturas salen con buena calidad y son bastante elasticos hasta el curado. El olor de la resina no es muy fuerte, huele a quimico, pero no satura el ambiente
Almost all the prints I make are large scale, 2 to 4 feet finished models. Sunlu solid grey ABS like always gives me high detail results without fail. It is very consistent from bottle to bottle. For me dimensional accuracy without warping is extremely important and Sunlu always delivers.
1. ABS-Like Resin, wei:
Das Resin lsst sich gut verarbeiten & auch die Nachbearbeitung des Druckes ist kein Problem.
Allerdings vergilbt das Resin beim Aushrten in einer UV-Hrtestation (Cure-Station) schon deutlich, was ich hier klar als Negativen Kritikpunkt anbringen muss – denn wer ein weies Objekt haben wollte, wird wohl nicht um eine nachtrgliche Lackierung drum herum kommen.
2. ABS-Like Resin, Clear-Grn:
Mit diesem Resin habe ich bislang noch nicht viel gedruckt… es wurde wegen eines ganz bestimmten Bauteils gekauft, leider passt die Farbe fr mein Empfinden – fr den vorgesehenen Druck nicht 100% …
Es ist zwar ein klares, grnes Resin – daher kann ich hier nichts abziehen, im Vergleich zu einem anderen Resin (ebenfalls klar-grn) hat dies aber einen etwas greren Blauanteil.
Das Vergleichsresin ist allerdings kein “ABS-Like”….
2. ABS-Like Resin, grau:
Bislang das beste Resin aus dem Kauf…
Eine Verfrbung konnte ich beim Aushrten nicht feststellen & die Eigenschaften eines ABS-Like Resin sind i.O.
Es kann gut nachbearbeitet werden – vom Bohren, ber Bemalen / Lackieren… verschrauben… alles wunderbar.
Dieses Resin hebt die gesamtbewertung deutlich an 🙂
When it comes to choosing resin for my 3D printing projects, SUNLU stands out as my clear preference over all the other brands and types! It produces accurate prints and I’ve had the least amount of failures. Unlike other resins, it emits a minimal odor, enhancing my overall printing experience; and less concern over harmful VOCs. What I beleieve sets it apart is its ability to replicate to produce intricate details, giving my creations a lifelike quality that’s hard to achieve (alongside the bonus of strength of ABS-like). It’s definitely top choice for achieving exceptional and durable prints every time.
Over the last year I have found this brands resin to be great to work with. Some items printed have been very detailed and I haven’t had to worry about the consistency of the resin.
You get what you pay for and the price is fair.
Always available for quick delivery as well.
Mi puntuacin es de 4 estrellas por que…
An no e usado esta resina ABS flexible en mi impresora Phrozen Sonic Migthy 8k como para opinar de su flexibilidad y calidad de la resina, curado, etc…
A si es que a prior me voy a enfocar en el empaque del producto y su precio.
Su precio es estandar tpico de 1kg por 25, pero esta se vende en 2kg con lo que pagas el doble ( aun que yo lo prefiero ) mas vale que sobre a que falte, yo la e comprado en oferta por 48 a si es que… ni tan mal, por precio y cantidad es justo lo normal, pero en este caso hablamos de que es resina flexible en ABS de las que no se agrietan, que para imprimir figuras de coleccin es lo mejor que se puede usar, ya que corres menos riesgos de roturas al manipular tus figuras, ya sea al pintarlas, limpiarlas, etc…
En mi caso estoy impresionado en la calidad del empaque de este producto, trae mas capas que una cebolla, algo que est muy bien para almacenarla en casa, sobre todo la caja, es un punto a favor, luego me gusta mucho que traiga filtros, trae como 5 o 6 filtros extras para su vuelta al deposito, algo que no hacen otras marcas, y la botella es de una forma comoda para agarrarla si eres de manos grandes como yo.
De momento esta es mi resea, la cual modificar cuando le de uso de impresin y agregar mas contenido a la resea.
Sigueme para mas consejos. jajaja
I’ve tried Elgoo and Anycubic’s ABS style resins before and they sucked. I spent several bottles worth of both of those trying to troubleshoot test prints and refine settings. Nothing worked. Hell, even Anycubic tried to help me and then gave up because it was determined their formula was straight up defective. Even after doing everything right, prints would fail.
But!! This!! Not only is it less expensive, but NO FAILED PRINTS!!! I do have to overcure it somewhat; i use a Creality LD-002H printer, which with regular and clear resin of every brand, cure time is about 2.5-3 seconds per layer. With this resin, I do have to pump up the cure time to 8 seconds. This does cause some issues, like resin stuck to the bottom of the tray after each print, and some bits floating in the resin. And theres some small defects as a result on the print itself, typical defects that come from overcuring like little flakes on the sides. But its nothing I can’t fix with a few seconds of sanding.
Compared to Anycubic’s, where even curing for 11 seconds per layer, pausing for several seconds between layers, slowing down the speed, and the layers STILL wouldnt cure- this is a godsend. I will take these small defects any day since, in the end, I end up with a usable, lightweight, gorgeous print.
Shown in the photo is two parts printed of a sword handle I’m working on for a cosplay. They look fantastic. You can see the small defects in the photo; nothing that cant be fixed.
Cumple muy bien con lo que promete como resina ABS-like, pero ademas me parece muy fcil de manejar, viene bien protegida en su empaque original, emite olores muy sutiles (en comparacin a otras marcas) y a un mejor precio que su competencia. Para mi es la mejor opcin actualmente. Espero se mantenga todo lo que ofrece.
Estoy usando tiempos de exposicin entre 2 y 3 seg en una photon mono 4k y va de lujo.
Excelente producto, buena calidad de impresin y ms resistente que la resina regular, se nota desde el momento en que separas los soportes. Definitivamente seguire comprando est resina.
El nico contra es que es ms difcil de limpiar que la resina regular.
I know many like me probably had some trepidation when seeing a 1kg bottle of ABS-like resin for under $25. I have used Sunlu’s filaments and am very pleased with the results but I thought that for the price this had to be substandard resin.
Figured the for the price I could always return it if I didn’t like it and after using it the verdict it…this is a keeper.
I am still getting it dialed in but the initial results are quite impressive. I used the Cones of Calibration to do the initial dialing in of the exposure and even at the narrowest point of the support on the success side it feels VERY study unlike the water washable resin that I have been using since I got into resin printing. I feel confident that anything I print with this can easily survive a fall or getting smacked into something and will not shatter or break.
The smell is not too bad, less than standard resin, but it is still there so make sure no matter what kind of resin you use to user proper PPE and ventilation. I am sure many are aware, but just in case, that repeated exposure to resin, especially on your skin can eventually lead to severe allergic reactions that will likely end up making you give up the hobby.
While writing this I got the cubes of calibration printed out and dialed in so going to be printing a mini and uploading it here later. Don’t be alarmed by the color change after you clean it and do the final cure. Like another user posted this resin does turn a slight beige color after curing for a while but within a few hours of some kind of voodoo magic it turned white again.
I am definitely going to order more.
Used this to print out a tank, more fragile resins would snap and break but this stuff keeps strong and can flex slightly during building.
Only negative is the sticky residue left on the containers used for washing, other resins clean easier but this resin leaves a film of sticky stuff even after curing.
Even with this minor issue, it’s still one of my favourite resins for big things.
I was using plant based until trying ABS like, this type is as good and definitely more resilient, prints very nicely with no failures. The only possible downside is support removal as the prints are more flexible, I use hot water and the supports come off slightly easier. Sunlu resins are the best I’ve used in over six years of MSLA printing – better than Siraya tech and a lot cheaper.
I’m blown away by the quality, was using Elegoo ABS like and ABS 2.0 before this, once it was dialed in, I’m getting the same print quality, sometimes it seems sharper. Only issue I have with it is the fact its colour looks like used mint chewing gum. It’s an off white/grey that’s quite ugly to look at. Works great with alcohol inks though.
From the off this resin has been head and shoulders above all the previous resins I’ve used. I don’t know what they use but there’s no smell, it prints beautifully, there’s a reasonable amount of flex even when cured and the detail is so crisp, even on the old Mars pro that i use. I’ll grab as many of these as I can whilst it’s as cheap as it is. My go to resin of choice.
This is the first resin I’ve ever used, printing on a Creality Halot-One. It’s really easy to get good results with, I had pretty spot-on results first time around. This resin can be printed quite fast, I’m printing at 2.4s exposure time. Definitely would recommend for beginners!
One note: it seems that with clear resins, it’s better to use something like spiritus than isopropyl alcohol to clean the prints. Haven’t tested it yet though. But using IPA leaves the print looking a bit frosted.
Didn’t have to change any srtting on my mars 2 pro when swit hibg to try this resin… all prints worked n came out with a great level of detail… happy to use agai