TOLESA Honing Guide Chisel Sharpening Jig for Wood Chisels
TOLESA Honing Guide Chisel Sharpening Jig for Wood Chisels and Planes Blades Edge Sharpening Holder Yellow Fixed Angle Sharpening Jig for Chisels 1/8″ to 1-7/8″ Blade Sharpening guide 1-3/8″ to 3-1/8″
From the brand
Other Products
| Weight: | 250 g |
| Dimensions: | 11.51 x 5.21 x 4.19 cm; 250 Grams |
| Brand: | TOLESA |
| Model: | T1HG02 |
| Colour: | Yellow |
| Dimensions: | 11.51 x 5.21 x 4.19 cm; 250 Grams |
Would have given 5 stars but the adjustment screw binds up pretty tight in 3 spots along its length so maybe the quality control could be a little better. I’ve used it with a wet stone to put a 30 degree bevel on a couple of different sized wood plane blades and it worked fine, except for the sticking adjustment screw. Each time the screw got stuck I couldn’t turn it by hand so had to use a screw driver. It was a bit of an inconvenience when readjusting for different sized blades. I haven’t used it to sharpen any chisels yet but the screw binds up in that area too. A drop of oil helped a little but still hard to turn by hand when it sticks. That said, once the blade is secured it’s at the proper angle and easy to sharpen.
Mycket bttre n den jag har tidigare av annat mrke. Inga strre problem att stta fast det som ska slipas. Andra verkar ha problem men visst de kanske har smre version n denna eller helt enkelt handhavande fel
Beitel vastzetten met de juiste hoek en slijpen maar. Paar keer heen en weer, en je hebt ze zo weer scherp. Geweldig hulpmiddel wat het slijpen bijna hufterproof maakt. Ideaal
Premesso che sono alle prime esperienze in questo nuovo mondo, vorrei comunque lasciare un feedback positivo per questa guida che appare stabile e solida nelle sue parti. Ho visto che sicuramente sul mercato c qualcosa di pi professionale ma essendo stata pagata 13 euro vale sicuramente tutti i soldi spesi! Consiglio!
The primary reason I bought the jig was a ball bearing roller. Unfortunately it came with a few rust spots. It does not affect jig performance, but if you use wet stones for sharpening be careful to clean, dry and lubricate after use.
Einmal den richtigen Winkel einstellen und dann gemtlich immer hin- und herschieben. Ab und zu ein wenig Wasser auf den Schleifstein und hin- und herschieben. Da das nicht elektrisch arbeitet kann es eventuell etwas lnger dauern. Dabei empfehle ich z.B. einen gemtlichen Film zu schauen.
Bestimmt gibt es bessere und teurere Hilfen. Eigentlich geht das auch ganz ohne, wenn man gut gebt und das Gefhl dazu hat.
Aber das Filme schaun fllt auf alle Flle flach.
This is a useful tool for maintaining a consistent edge on your chisels. Clearly made of high quality products, it completes its function to satisfaction.
Be careful when using the lower clamp to hold your metal, as it is important to keep it level to the stone, and it can be easy to try to set it inside the included bevel (if it doesn’t fit you will have issues doing it that way).
Advice- clean the bearing wheel between grits to avoid contaminating your stones. Look up dual beveling planer blades and chisels on YouTube or Google to cut down on time spent sharpening. And concentrate on maintaining a straight line while sharpening to avoid uneven bevels.
The groove to hold the tool is a bit thick with paint. It is difficult to place the tool accurately in the holder. When using you need to move the tool far beyond the recommended spot unless the stone is long enough to ride the guide on the stone. The bearing is in the middle of the guide which makes it prone to canting. That being said with a little experimenting the tool is useful.
Bought two versions of this honing guide for comparison. This brand is far superior in terms of machining. Beds line up, chisel jaws close to support very narrow chisels (1/8″). The similarly priced stainless steel version is far inferior. Have bought 4 more for my Woodworking class. Note that it is not suitable for sharpening short blades, like in the Veritas Low Angle block plane. You need a blade with at least 3″ long parallel sides.
Product was delivered quickly and I am pleased with the quality of its construction. Have already used it to help with sharpening several wood chisels and a plane blade. Very happy with this purchase.
Premesso che per il neofita un valido aiuto per mantenere la posizione della lama in affilatura, la forma della dima non adatta a tutti gli scalpelli. I miei Stanley 5002 calzano male e li devo appoggiare alle due guide tonde in acciaio piuttosto che nella scanalatura. Per il resto va bene.
This guide is very easy to use. An instruction is included on the side of the box to show how the correct angle of the chisel is set, however I suggest you place the chisel on the whetstone, then align the guide to the chisel. Ensure the chisel is correctly located within the guide, then check that the chisel is perfectly mated to the whetstone.
Its ok, but if you’re going to be placing a bevel edge chisel in there that’s a little chunky it doesn’t hold it well, some parts need filing flat and some of the edge space taken out so it holds them straigh