Trolley Jack 3 Tonne Long Reach Heavy-Duty
Trolley Jack 3 Tonne Long Reach Heavy-Duty
Length and Weight
Length of trolley jack is 625mm. Weight of trolley jack is 19kg.
| Weight: | 20.4 kg |
| Dimensions: | 67 x 29 x 17.4 cm; 20.4 Kilograms |
| Brand: | Sealey |
| Model: | 1153CX |
| Manufacture: | Sealey |
| Dimensions: | 67 x 29 x 17.4 cm; 20.4 Kilograms |
This is a proper jack Sealey are a renowned make, this is perfect for the home mechanic or a garage for that matter very good indeed. Heavy but not fussed as they are made that way.
Very strong, very sturdy when using. I use it to lift my Range Rover P38 and it lifts with ease! Top quality item, just make sure to follow instructions and prime it first!
There is a big label on the Jack telling you how to prime the Jack before first use, it only takes five minutes. Make sure you do it.. Mark.
This is a great jack. I’ve never used one of these and it all fitted nicely together. Simple bleed instructions.
One thing you will need is a heavy duty pad for your vehicle. This goes between the jack and jacking point to prevent damage. That was 4.99extra on amazon and car specific. I have an X5.
Great jack, very easy to use an a great price for what you get. Lifts my vehicle with ease. Would recommend to anyone who needs a decent jack. Delivery was very fas
This is a very sturdy jack, it lifted my car with ease and allowed me to change the wheels. My only gripe is the pump handle might have a better clip to connect it to the jack, but it’s a minor issue and doesn’t affect the use of the pump.
Even though it’s heavy it is portable due to the detached handle. I went for this as it was on offer and it’s well worth the money, even at full price! It’s sturdy, really safe to use. Would recommend
Have had this trolley jack for over 6 months now and have put it through a lot of use on a number of cars. Easy to use and very sturdy. Works on a variety of cars including my long slung Mercedes SLK.
Used this to raise a Mazda 6 onto axle stands, which a cheaper 2T hilka trolley Jack couldn’t reach. Well made, easy to use action and good reach for my needs. Really wish it came with a case though.
The trolley jack did not have a carrying handle as my previous jack so it is more awkward to carry. The jack, however is very well made and does the job intended well.
Very good, just follow the instructions to initially bleed the system and away you go. Low enough for a Mini sill. Could do with a carry handle instead you drag it by the lever handle which can’t be a good thing in the long run.
A good trolley jack, goes low and reasonable quick to raise. Does not come with a rubber pad, though, and in contacting the manufacturer, they do not make one. This trolley requires a small rubber pad and so far I haven’t been able to source one. Apart from that, I’d recommend this trolley.
Bit old fashioned and doesn’t go very low or lift very high.
Might have an issue lifting a car with a flat tyre..
Works, but will probably buy something better if it ever needs to be replaced or supplemented.
Works very well. Can jack the car up from the rear and still place stands at the front of my car. Only down size is that it its quite tall so won’t fit under low profile vehicles .
I figured out straight away how it works. I made a jack pad from a Rubber Sanding Block & attached it on top of it to protect the car from scratches and other damages. It is strong enough and works fine.
I’ve been wanting to buy a trolley Jack for my car for a long time now and after buying a car that didn’t have a jack with it (BMW) it forced my hand a bit. I have to say that I’m really pleased with the Jack. I’ve never owned a trolley Jack before but feel that it’s very sturdy, will last a long time and does what is meant to with ease. I’d recommend this to others and have to friends and family already.
Well made tool (as expected from SEALEY) however “Max Saddle Height” not enough to lift the wheel (one at a time) clear of the ground on a Land Rover Discovery 3.
(1) The jack needs to roll slightly when you are raising a car to remain under the load. The wheels are quite small so they dig into my tarmac drive. If the wheels do not roll, the jack pulls the car toward you. Hence I needs to put the jack onto a sheet of plywood so that it can roll. If you have a concrete of block drive you may not have this problem.
(2) the point of contact with the car is metal and shaped for a sort of universal fit. This means it doesn’t really fit any jacking point properly. If you want to avoid scraping around the jacking points, then they separately sell a rubber block to fit into the jack which I shall now buy.
(3) before you start, think through the points that you will use for both the jack and the axle stand. Clearly they will not both fit onto the same jacking point. The jack is quite big, so they can not be very close together either. NEVER use only the jack; it lowers rather easily and very quickly.
(4) trolley jacks are much more complicated that the usual jack that comes with the car for wheel changes. Take some time to learn how it works before you use it. Also note how to maintain it.They are also much, much heavier and bulkier so work out where you will keep it. You will not want to move it far either.
(5) having taken into account all the above, it is pretty easy to use and raises the corner of a car in about 10-15 seconds. It can also drop it in about 2 seconds, so be careful when using the release valve.
All in all, I am glad that I have it.
Great jack at good price. Bought to replace factory sissor jack for my van, works well for our car too (vw passat). Remember it’s meant to be used on flat concrete . . . So I have a bit of plywood with me in case of roadside breakdown. Would recommend. Heavy and seems like good quality, but I’ve only used a few times.
After some to-ing and fro-ing Cooks of Bedford did eventually replace the whole jack and collected the first one they sent. They also send a free gift by way of compensation. Because of the delay I was not able to use the jack when I planned and the work on my car had to wait. The rain didn’t help either… However I used it last week and it performed very well. I look forward to many years of reliable service.