iONZ KZ-Z – PC Gaming Case Full ATX Mid Tower – Dual Chamber
iONZ KZ-Z – PC Gaming Case Full ATX Mid Tower – Dual Chamber Dynamic Advanced Series, Front I/O Type-C, White Tempered Glass (4 x120 mm Arctic White Fans)
Water cooling options
Flexible AIO positioning
- Top can Fit up to 360 mm Radiator
- Bottom can Fit up to 360 mm Radiator
- Side can Fit up to 360 mm Radiator
- Rear can Fit up to 120 mm Radiator
Style without Compromise
Option for 3 Side mounted fans
No Longer do Glass Cases have to impede Airflow. The Dual Dynamic Advanced offers the class of a Glass Fronted case whilst still allowing ample airflow from the top, bottom and sides.
| MotherBoard Supported | ATX |
| Front Panel Ports | USB 3.0 x1 and USB C x 1 |
| VGA Card Support | up to 380 mm |
| CPU Cooler Height | up to 160 mm |
| PCIE Slots | 7 |
| PSU Position | Dual Chamber Bottom with Grommets for Cabling |
| Panels | LHS Tempered Glass, RHS Metal with Airflow |
| Fan Support | up to 10 x 120 mm Fans |
| Case Size | 410mm x 277 mm x 415 mm |
| Watercooling Support | up to 360mm Top,Side and Bottom |
| Dust Filter | Top, Side and Bottom Dust Filters |
| Dimensions: | 46 x 42 x 34 cm; 8.8 Kilograms |
| Model: | KZ-Z |
| Manufacture: | ionz |
| Dimensions: | 46 x 42 x 34 cm; 8.8 Kilograms |
| Origin: | China |
Where do I even begin on this case???
Pleanty of room being a dual chamber
Fan space? Pleanty you can even shove 10 fans in it
Build ascetics??? You could honestly throw in optiplex components in this and it would still look amazing
Anyway ionz keep it up this is the best case I’ve ever owned and do not regret spending money on it
(Just a warning though my 360mm rad did not fit in the back so it had to be put up top)
eally wasn’t expecting much because of the price. but upon first impressions i was taken away case is well enough made plenty of space to build in and for cable management in the back. overall a very good looking case for the price
Very nice looking case with plenty of build space to high those nasty nasty cables! The only issue I had was getting the motherboard seated correctly duin to the rear IO. I’m not sure if it was my case particularly but it did require a little force to seat correctly into the back slot which was a little scary!
The case is a nice size and it came decently packed, glass un smashed and in a nice new condition. I don’t fault the seller at all besides the description was a bit misleading. ” micro atx mid tower ” which I thought would fit a ATX motherboard but was wrong. would recommend this case for anyone using micro atx boards and looking for some nice case.
Excellent value for money. Plenty of room for a 7900xt on the second PCIE slot which seems almost impossible for most matx cases. Plenty of room for an AIO liquid cooler and wire management.
Front IO is a little disappointing but to be expected for the price.
The only thing that let’s it down is the glass side panel isn’t on a hinge.
The IONZ Dual Chamber Dynamic is a game-changer for Micro ATX enthusiasts like me.
I used this case for my build with an RTX 4060, and it exceeded my expectations in every way.
1. **Spacious Design:** The dual-chamber design makes cable management a breeze and allows for excellent airflow. There’s ample space for my high-end components.
2. **Aesthetically Pleasing:** The sleek and modern design is a visual treat. It looks right at home on my desk, and the tempered glass panels showcase my components beautifully.
3. **Superior Build Quality:** The case is built like a tank. Sturdy and durable, it gives me confidence that my components are well-protected.
4. **Efficient Cooling:** The airflow in this case is outstanding. My RTX 4060 runs cool even during intense gaming sessions.
5. **Easy Installation:** It’s user-friendly with tool-free drive bays and easy-to-access panels. Building in this case was a joy.
Overall, the IONZ Dual Chamber Dynamic has taken my Micro ATX build to the next level. It’s worth every penny and is the perfect home for my RTX 4060.
Highly recommended!
Only compliant is the case fans have no way of connecting to the motherboard for fan or RGB as they are powered by a sata power cable
I’d recommend buying without fans and fitting your own
Also I have a random 2 pin jumper cable coming out of the rear fan and no idea what it’s fo
So, for the price I wasn’t holding out for a lot, but I am actually quite surprised. Seems well built. Fits up to 9 fans at 120mm. Plenty of room at the rear for cable management. Sits a nice amount of distance off the desk for plenty of air flor into the bottom fans. Only thing I don’t like are the 3 fans it came with, they are not pwm so can’t be adjusting for speeds via the motherboard, but, not bad fans in general. All in all, a great case for the price.
Love the amount of space you have perfect case for my PC build l, the other case I had before was a iONZ but it was so compact no got dusty really quick. This Though I’ve had over 2 weeks and not much dust at all
My SSD and HDD not fit they seem to be a bit too big and holes dont line up also make sure you have a slot in your motherboard for the type c connector as I didn’t know it had a specific lead but other than that all is good very good quality the cable management are a lot better than my old ones
The case had a little dent in the back from being in transit, which I was able to push back out but overall for price for what you get is a good.
I wanted to build a new PC based around the new Ryzen AM5 platform and had most of my components picked out early but really struggled with a case.
I had picked out a few budget cases but none were quite what I was looking for. I wanted something that was basically a tardis, a mATX case with plenty of room inside that would be easy to build in. I don’t particularly care about RGB so that wasn’t a consideration.
I found the iONZ case and opted for the option without the case fans.
It arrived quickly and in good condition. And man was unimpressed.
There is plenty of room to work with inside, I installed my MSI Pro 650m motherboard, Ryzen 5 7600x CPU, with a Thermalright Assassin King 120 SE, and an ASUS Dual Radeon RX 6750xt GPU with no worries of size being an issue. I picked up three Thermalright case fans and fitted two on the side to draw air in, and one at the back to expel air out. Thermals in use have been very good.
The case looks great with the tempered glass front and side and with the extra space behind the motherboard for the PSU, it’s easy to keep it looking neat and tidy.
I’m really impressed, especially for the money. I’ve worked with much worse cases that cost more than double than this. I would thoroughly recommend this if you want a good looking case, that is easy to build in and you are working to a budget.
That said, this is actually a pretty nice case. There is plenty of space internally, sensibly placed case-fan locations and a good wiring void (to hide any ugly extra wires). My daughter loves the glass front and side that shows off the LED lighting on the build. The finished product looks a lot more expensive than it was.
Very happy with it.
I flip PCs on the side and I try to save money when looking for a case,
while also making sure it looks great. This is a great budget case that is great quality and is very easy to build in. I used this case for a budget PC flip and it came out great. The included fans are nice and they can be controlled with a button on the case which is great.
Highly recommended this case
I’m really impressed how nice it looks and building with it.
It’s prob one of the best so far in white for the money.
I will be useing this again a fair few times.
Def worth buying better than some of the crap ones out there.
Just got this case and for the money is great. Compared to over case of this style costing way over 100.
I have had no problems with the biuld quality of this case. Metal is a little thin so if you screw fans in can Bend the case a little.
Cabling loads of room for Cabling no cable grommets but there are no sharp edges.
Over I am happy with this case just need to get some more fans to fill it ou
Cable management is pretty easy with how much space there is in the second chamber and theres plenty grommets to keep everything tidy.
There’s plenty mounting options for both HDD and SSD drives however you’ll have plenty space to add more if needed.
The glass side panel is removable with thumb screws and the front can be removed from inside also. The back panel has rear screws to hold it in place.
Downsides:
one of the standoffs won’t tighten up.
There’s a mesh area above the PSU that doesn’t have a filter.
The three included fans (mime were non led white) are powered by molex so they’ll be constantly running at full power.
Id recommend this for the money
Cons – rgb fans cannot sync to motherboard so if your planing on syncing your RGB with the included case fan you would not be able too.
Also would like to see a hinge for the side panel instead of the 4 screw but i cant really complain for the price its a really good case
I would recommend people to buy the case without the fans and buy the fans separately, as it would give you fan control plus RGb syncing.
Also it can fit 160mm CPU cooler without hitting the glass. (I using hyper 212 evo)
A very nice to build in. I had a lot fun with this one.
The rear chamber has space for the PSU, and a separate 3.5″ drive bay. With plenty of space for cable management.
The fans the case comes with connect to SATA power, and daisy chain off each other. So if you are looking to use ARGB lighting, make sure you have the correct amount of fans to spare.
I did have an issue on delivery, in that the fans weren’t sent. Contacted company and they graciously sent the fans separately, which arrived very quickly. Great service indeed.