Vetroo AL600 White Mid-Tower ATX PC Case, Pre-Installed
Vetroo AL600 White Mid-Tower ATX PC Case, Pre-Installed 3x120mm ARGB Fans, 3x120mm Regular Fans, Top 360mm Radiator Support Mesh Computer Gaming Case, Controller Hub Included
 |  |  |  | |
|---|---|---|---|---|
| Dimensions | 18.5 x 8.1 x 17 inches | 16.7 x 11.2 x 15.7 inches | 16.8 x 8.3 x 15.8 inches | 17.8 x 8.7 x 16.1 inches |
| Motherboard Support | ATX / Micro-ATX / ITX | ATX /Micro-ATX /ITX | Micro-ATX / Mini ITX | ATX / Micro-ATX /ITX |
| Max CPU Cooler Height | 160mm | 160mm | 166mm | 160mm |
| Max GPU Length | 400mm | 400mm | 345mm | 325mm |
| Fan Included | 3x 120mm Fan (Front) | 1x 120mm Fan (Rear) | 1x 120mm Fan (Rear) | 1x 120mm Fan (Rear) |
Super cute set up.
Colour colour and size!
Great size case, the colour was just what I was after, only down side is that three of the fans are black and not pick so I will eventually replace those.
Every other pink case I could find was tiny. This one fit everything and turned out pretty great I think. It comes with rgb hub which was really handy. Very nice magnetic door, easy to remove.
Every other pink case I could find was tiny. This one fit everything and turned out pretty great I think. It comes with rgb hub which was really handy. Very nice magnetic door, easy to remove.
Not bad!
I just rebuilt my gaming PC with this case and also bought 12, 120mm case fans.
1. Case is VERY spacious, as you can see in the photo. Hyper 212 black CPU tower with 2, 120mm fans. AMD 6700xt 3 fan GPU from XFX. Both fit just fine!
2. The back of the case has a good amount of space as well for cables. I have a non-modular PSU, the 12 case fans (2 cables ea), a hard drive, and 2 fan controllers tucked inside it.
3. Tons of air flowing in this case, should have no issues keeping internals cool. With 12 of these case fans going, it can get a relatively loud wind blowing noise. I wear a headset most of the time so..
4. The case is a fairly big size, I underestimated it based on pictures. I have a big desk so it’s no issue for me, might be for others though.
A couple things to gripe about.
1. The picture on sales page is miss leading, it shows a kind of gunmetal grey front panel.. It’s all black. I really wanted the gunmetal grey. But black looks great too so no worries.
2. The product page also states up to 11, 120mm case fans.. It has up to 12, 120mm case fans. Luckily I bought 12 case fans. So worked out great!
Overall it’s a great case! I would easily recommend it.
This tower is perfect for my first build. I wanted something soft powder pink because it is my absolute favorite color and I am VERY pleased with how spot on the color came. Usually soft pinks like this show up hot pink or worse. Bleh.
This tower has SO much room for everything that I will be putting in it from my CPU to my AIO. Heck, there is enough space for me to toss in some extra fans because I live my life on the edge. LOL
Anyways… I’m SO happy with this purchase and HIGHLY recommend this beautiful beasty to everyone!
I like the case it will work. However the product images are misleading. For one it shows the battery through the lower cover and did not on the product images. And the product images also show a black color around the front glass but in reality its white. Also the back cover is really hard to get on especially if you have a lot of wires. It screws in on the right and has nothing to attach the left side so it sticks out a little and nothing can be done about that. The 3 fans that comes in for the bottom and rear have no rubber sound dampeners on them. The magnet dust covers are cheaply made and the one for the bottoms doesn't even cover the entire area its supposed to. And the top dust cover wont lay flat when you use the screws holes. Its also very light which could be a good thing or bad thing. It is not worth the the $120 price tag, $60-70 would be more approximate. However it will do satisfactory, it gets the job and looks good when done.
I like the case it will work. However the product images are misleading. For one it shows the battery through the lower cover and did not on the product images. And the product images also show a black color around the front glass but in reality its white. Also the back cover is really hard to get on especially if you have a lot of wires. It screws in on the right and has nothing to attach the left side so it sticks out a little and nothing can be done about that. The 3 fans that comes in for the bottom and rear have no rubber sound dampeners on them. The magnet dust covers are cheaply made and the one for the bottoms doesn’t even cover the entire area its supposed to. And the top dust cover wont lay flat when you use the screws holes. Its also very light which could be a good thing or bad thing. It is not worth the the $120 price tag, $60-70 would be more approximate. However it will do satisfactory, it gets the job and looks good when done.
Love the tempered glass door that lifts off the hinges - that's what originally sold me on this case. The shade of pink perfectly matches my Razer Basilisk keyboard and mouse in Quartz. Lots of access holes for cable management. The window to access the back side of the motherboard while it is mounted is very convenient. 10/10 I would buy from this brand again.
Love the tempered glass door that lifts off the hinges – that’s what originally sold me on this case. The shade of pink perfectly matches my Razer Basilisk keyboard and mouse in Quartz. Lots of access holes for cable management. The window to access the back side of the motherboard while it is mounted is very convenient. 10/10 I would buy from this brand again.
This case is insane. My first new build in 8yrs. This case has everything and more then the more expensive branda. I am very happy with it. I will be looking to them if build again but as long as it holds up, I can't see myself needing another. Unless parts start to get very massive in the future
This case is insane. My first new build in 8yrs. This case has everything and more then the more expensive branda. I am very happy with it. I will be looking to them if build again but as long as it holds up, I can’t see myself needing another. Unless parts start to get very massive in the future
I used it for my first-time build and went cheap on some components such as the case itself. My only real complaints are the cable management is not the greatest. Still works well nonetheless. The other is an ATX board fits pretty snugly and I had to remove a couple of fans to get some cables plugged in. It looks great though and does its job, so overall I'm happy.
I used it for my first-time build and went cheap on some components such as the case itself. My only real complaints are the cable management is not the greatest. Still works well nonetheless. The other is an ATX board fits pretty snugly and I had to remove a couple of fans to get some cables plugged in. It looks great though and does its job, so overall I’m happy.
The pre-built fans aren't silent but they are still quiet enough. The front looks a little weird with the panel blocking half of the bottom fan but to each their own. I added two more exhaust fans up top for the cooler radiator and air flow seems fine with i7-13700k idle temps at sub 30. The control board's double stick tape on the back isn't reliable, I had to add a strip of my own double stick tape to make sure it stayed put. I had to remove one of the bottom fans temporarily so I could plug in the pump fan at the bottom of the motherboard. There wasn't much clearance between the bottom fans and the motherboard but it was ok for my build; I'd heard that others weren't as fortunate with their choice of motherboard. The top of the chassis had enough space for me to place a 2 fan radiator where it wouldn't bump into a large heat sink sitting at the top of the motherboard (my previous chassis didn't have enough clearance between the two, hence I bought this one). Everything worked out of the gate as soon as I sorted out my motherboard's BIOS issues. All in all, this chassis was a welcome part of a fairly drama-free home project.
The pre-built fans aren’t silent but they are still quiet enough. The front looks a little weird with the panel blocking half of the bottom fan but to each their own. I added two more exhaust fans up top for the cooler radiator and air flow seems fine with i7-13700k idle temps at sub 30. The control board’s double stick tape on the back isn’t reliable, I had to add a strip of my own double stick tape to make sure it stayed put. I had to remove one of the bottom fans temporarily so I could plug in the pump fan at the bottom of the motherboard. There wasn’t much clearance between the bottom fans and the motherboard but it was ok for my build; I’d heard that others weren’t as fortunate with their choice of motherboard. The top of the chassis had enough space for me to place a 2 fan radiator where it wouldn’t bump into a large heat sink sitting at the top of the motherboard (my previous chassis didn’t have enough clearance between the two, hence I bought this one). Everything worked out of the gate as soon as I sorted out my motherboard’s BIOS issues. All in all, this chassis was a welcome part of a fairly drama-free home project.
This computer case worked great for my GF's build! Glass door comes off easy for access! Very well made besides the power and reset buttons are lopp sided and also if you top mount an AIO the screws will make the magnetic dust screen stick up making it look a little funny! None the less great case for the money and also one of the only ones in pink!
This computer case worked great for my GF’s build! Glass door comes off easy for access! Very well made besides the power and reset buttons are lopp sided and also if you top mount an AIO the screws will make the magnetic dust screen stick up making it look a little funny! None the less great case for the money and also one of the only ones in pink!
Great case - just don't use the hub
Just to note the pink variation doesn’t include the black side panel, this is clear so shows the pink case. Use your on board ARGB headers which the included rgb fans support as the on case hub is crap, same thing for fan speed just use the headers on your motherboard which you can do to control fan speed of all 6, they are PWM so all works well. lots of cable tides and accessories included to help the build.
After building the PC, I quickly learned the power Sw connector was faulty. I could only power up the rig by jumping the power pins on the motherboard! After contacting the Vetroo through Amazon, which Amazon was a great help in the process, Vetroo quickly sent me a replacment part for free, which i easily switched out.
Thankyou Vetroo for your quick response.
Pros.. Plenty of room to build in! The front glass panal swings open for easy access, Plenty of fan size options. will hold 10 120mm fans, that’s with a radiator for an aio! Or 5 140mm fans + 2 120mm fans. two fans on the bottom come installed, but i took them out! All in all, the case is nice.
Cons.. Cable management in the back is super tight.
The pull out slots for the GPU are disposable. The vertical spot is reattachable with thumb screw.
With all of the fan options and locations, I was finally able to cool my 13700 CPU with this case. With this case, I was able to install a larger 360mm AIO cooler and I have not had any problems since with overheating.
With all of the fan options and locations, I was finally able to cool my 13700 CPU with this case. With this case, I was able to install a larger 360mm AIO cooler and I have not had any problems since with overheating.
For my money this is the best looking and most functional case on the market. The black border around the glass window really showcases your custom build in a stunning way. The door pivots open easily via a simple magnetic mechanism, no screws required. My GeForce 3080 TI and all other components fit easily as I’d expect.
The one caveat is the built-in fan controller on the back side panel of the case that powers all 6 built-in fans. The problem is that there is no way to control these fans from the motherboard, so they’re stuck blasting away at 100% all the time. For all the other reviews that mention how effective the fans are, or how loud this case is, that’s why. It’s a bit of work but do yourself a favor and unplug them all from the fan controller and instead plug them into the motherboard so you can control them based on CPU/GPU temps and have a much quieter PC as a result.
I love this case and the price was on point. Just be aware if you have a full size GPU and mount it motherboard direct you will need a 90 degree power supply cord. They are also sold on amazon for around $19.
I love this case and the price was on point. Just be aware if you have a full size GPU and mount it motherboard direct you will need a 90 degree power supply cord. They are also sold on amazon for around $19.
My previous case was literally held together with duck tape, and I REALLY wanted to get a pink case. This is perfect! I did have to remove the pre-installed fans in order to get my motherboard in and stuff plugged in, but it all worked out and I love it. I did choose to unplug the fan lights, but they were nice and bright when ai tested them. The fans are louder than my other fans but my old fans has been through 4 other builds and they deserved to retire. Overall, 10/10.
My previous case was literally held together with duck tape, and I REALLY wanted to get a pink case. This is perfect! I did have to remove the pre-installed fans in order to get my motherboard in and stuff plugged in, but it all worked out and I love it. I did choose to unplug the fan lights, but they were nice and bright when ai tested them. The fans are louder than my other fans but my old fans has been through 4 other builds and they deserved to retire. Overall, 10/10.
I needed a new case for my triple fan radiator. My old case was the same size but only fit a 2 fan radiator at the top. I had a choice between this and a perhaps more appealing to a gamer yet likely cheap materials at a higher price due to it’s aesthetics pc case. I decided to go with this, and went from a black case to this white for the ambiance effect it has with RGBs. But what won me over was the extra fans. I figured I wanted beauty and performance over sleek faux futurism.
I regret nothing! I installed 2 ARGB fans into the extra slots immediately, and replaced the fans underneath the GPU as well. Btw, YES they make a difference! My 2080ti runs noticeably cooler when gaming. They 2 under the gpu, the 3 front, and the 2 extras inside are set to INTAKE. Holy cow do they suck in air. The exhaust fan in the back is blowing cold air when it’s running at full. There is only a little heat that comes out of the top radiator. The inside of this case is getting so much fresh air, it’s just ice cold all the time.
My old case had 3 fans but only had a narrow slot along the front, and on the bottom to draw in air. This case has the whole front panel to draw in air. Then you got fans along the side helping pull more air, as well as the bottom, and your psu also pulling air.
THIS BABY IS A VACUUM… without all the loud noise.
Downsides. The extra white fans aren’t anything to brag about.
Also the bottom has screws for 3 fans… However it’s impossible to fit a fan in the middle slot with an ATX motherboard. All the case/usb and other wire essentials plug in and stick out. These bulky fans, and my narrower fans both fail to fit. They should have moved the mounting holes just a few millimeters towards the glass and it’d be perfect. Idk how they could have made such a great case. And then fail to notice such a flaw that is so easy to fix at the manufacturers level. I will eventually have to drill my own holes, but honestly I am not that picky. I just have an ugly gap between my fans. I 3d printed an icicle to hold up my gpu there instead.
I am going to give this a 5 star solely because that extra fan doesn’t matter, and out of an otherwise perfect case. I can accept one small flaw for it’s price. If it was over $150 in price, I would give it a 4. But this is too good of a case for it’s price for me to give it anything less than a 5.
I really love this case. Only thing black on it is the boarder on the glass and then the feet stands for it. My desk setup is mainly pink and white. But this little amount of black don’t clash with it at all. Overall for a mid size case I’m really impressed with all the fan options and the size this really can hold. I could easily also put a 360 radiator on the font and still have clearance for the graphics card. If looking for a pink case this is by far the best one I have seen.
I’m running a Ryzen 9 7950x, rog strix X670E-A motherboard, Sabrent extreme performance 2tb ssd, 64gb of G.skill trident ddr5 6000, gigabyte aero oc geforce rtx 4080, Pinkflow ID-cooling 360 aio, super flower leadex gold pro 1000W power supply.
I really wanted a pink case to match my setup and this case is almost perfect! The metal feels sturdy and the glass panel is a nice touch. My fiance said this case is easy to build on and definitely made cable management much easier (this is the 6th pc he’s built so he has experience, keep in mind it may not feel as easy for other people). Giving it 4 stars because I’m not a fan of the open gap that shows the PSU.
This is a great looking case. I was glad to find out that I could turn off the fan LEDs. I am 76 and I don't play games, so I don't need the lights, although they are cool for about a minute. I would have given this case if one of the six fans was dead on arrival. Also, the control module came off the back of the case and wouldn't stay so I had to buy some double-sided tape. Now it is in place permanently.
This is a great looking case. I was glad to find out that I could turn off the fan LEDs. I am 76 and I don’t play games, so I don’t need the lights, although they are cool for about a minute. I would have given this case if one of the six fans was dead on arrival. Also, the control module came off the back of the case and wouldn’t stay so I had to buy some double-sided tape. Now it is in place permanently.
The picture has the PSU completely shrouded, however the actual case has a small window exposing the PSU. So if you don't have a white PSU it will be visible.
The picture has the PSU completely shrouded, however the actual case has a small window exposing the PSU. So if you don’t have a white PSU it will be visible.
This is one of the best cases I’ve built in. There is plenty of room for cable management in the back and the tubing helps with tidying it all up. The pre-installed fans are okay, but I replaced them with my corsair ones so I don’t have to use two different rgb softwares. The design of the case is great for airflow. Currently have the fans as front and side intake, top and rear exhaust.
Overall – a great case for maximum air flow control.
Likes – comes with its own rgb control hub. Comes with 6 fans (1 rear, 2 bottom, 3 led front). The bottom 2 fans sit over the power bank and HD slider. The filters for the case are held with magnetic strips, which is a new concept to me. There are plenty of cable guides and anchoring areas for a clean wiring.
Dislikes – fans that come with thr case are very noisy. If you power the fans using the rgb hub, most fan control programs will not be able to detect the fans. The magnetic stripped filter on the top does not sit well if you install an All-in-One (AIO) cpu fan. (I have a 360 MM).
I ended up swapping the front rgb fans for noctura fans (my preferred fans), and since it was too cramped I removed the bottom two fans. Then I plugged the fans in directly to my motherboard. Using my fan control application, it detected the newly installed fans and I set them to 60% speed. Far less noise!
This is a very user friendly case and it has a lot of space inside. I put an ATX motherboard in it with an AMD 5700X cpu, 6800XT gpu, 64GB of ram, and an AK620 cpu cooler. There’s plenty of clearance for everything. I run the simple RGB fan setup where I press a LED button to change the fan colors, works perfect for me. The glass side panel is easily removable and also magnetically latched, kinda cool. I’m very happy with i
Bought this case because I was upgrading my gaming pc with a new CPU cooler and GPU.looked at A LOT of reasonably priced cases and this one was the best choice.had enough space for a triple fan radiator with no problem.my original motherboard fit perfectly.an it had more than enough areas to add fans.i also thought the swing open door was a useful feature. Although I didn't use the fans that came stock, it had everything else I needed. Thinking about building my wife a pc an might get this case again but in pink. Definitely worth i
Bought this case because I was upgrading my gaming pc with a new CPU cooler and GPU.looked at A LOT of reasonably priced cases and this one was the best choice.had enough space for a triple fan radiator with no problem.my original motherboard fit perfectly.an it had more than enough areas to add fans.i also thought the swing open door was a useful feature. Although I didn’t use the fans that came stock, it had everything else I needed. Thinking about building my wife a pc an might get this case again but in pink. Definitely worth i
Overall a great case. Everything was well packaged and organized. Even the rgb fans and internal fans were already organized and connected. I ended moving the 2 bottom fans to the top but I had to purchase different fan screws because the fans on the bottom had a different bit size. Only reason I don't give it a 5 star review is because I don't like that I had to pry out the panels for the graphics card. It is not a simple unscrew and pull out method. If I had known that before I installed the motherboard i would have taken it out already. For this, I ended up scratching the motherboard edge close to those panels because I had to pry them out. But it is not a bad scratch, it didn't break anything. Also, I wish the rgb lights would sync with my settings but it seems it is just independent. I don't think I can switch it off unless I unplug them, unless I am missing something. Anyway, Im still happy with the purchase and would recommend it. Thanks.
Overall a great case. Everything was well packaged and organized. Even the rgb fans and internal fans were already organized and connected. I ended moving the 2 bottom fans to the top but I had to purchase different fan screws because the fans on the bottom had a different bit size. Only reason I don’t give it a 5 star review is because I don’t like that I had to pry out the panels for the graphics card. It is not a simple unscrew and pull out method. If I had known that before I installed the motherboard i would have taken it out already. For this, I ended up scratching the motherboard edge close to those panels because I had to pry them out. But it is not a bad scratch, it didn’t break anything. Also, I wish the rgb lights would sync with my settings but it seems it is just independent. I don’t think I can switch it off unless I unplug them, unless I am missing something. Anyway, Im still happy with the purchase and would recommend it. Thanks.
This is a lovely looking case and I especially love that the glass panel functions as a door and can be taken off easily if needed.
The back has a lot of little places to secure wires to make cable management easier and two bigger plastic brackets to hold thicker bundles of cable but I actually ended up taking it off. They’re attached with a sticky adhesive so you don’t need to worry about damaging the case if you wanted to remove it.
You can take off the front mesh panel of the case as well if you wanted to replace the fans it comes with.
Here’s a few flaws I noticed in terms of quality:
– The buttons on top of the case were slightly slanted (It’s only noticeable when there’s a light shining directly on it so it’s not too much of an issue)
– The blue USB port on top (I think it’s labeled USB 3) gets kinda stuck whenever you plug something in and you have to pull hard to get it out.
~ I have also not been able to hear anything when I plug my headset into it but my friend did do a lot of fiddling with the wiring when he was helping me build it so maybe he messed something up.
– The paint came off easily just from the screws I was using to secure the fans.
~ This was my first time building a custom PC so I don’t know if that’s normal or not for all cases or if it was just the particular fans/screws I got. The fans cover the tiny spots where the paint came off so it’s not noticeable. Just be careful not to scratch it.
Overall I still love this case and the number of useful little features it has so I’d say I’m pretty happy with my purchase 🙂