Vetroo AL700 Mid-Tower ATX Black PC Case Dual Tempered Glass
Vetroo AL700 Mid-Tower ATX Black PC Case Dual Tempered Glass Panel Top & Baseplate 360mm Radiator Support Computer Gaming Case ARGB with LED Strip Pre-Installed Rear 120mm Addressable RGB Fans
ARGB Light Strip
With LED light strip and ARGB fans, The color of light strip can control by I/O LED button.
Powerful Airflow Performance
There are two airflow channel,The open design of the perforated top and bottom assures excellent thermal airflow.
Removable Dust Filters
Magnetic dust filter on the top and bottom. It can effectively reject the entry of dust when inhaling cold air, and effectively reduce noise.
Type-C Ready
The I/O panel on the top of the computer case, Type-C can offers faster transfer speeds. usb2.0, usb 3.0 give you more choice.
Specifications
| Product Name | AL700 |
| Available Color | Black |
| Dimensions | 16.7 x 11.2 x 15.7 inches |
| Motherboard Support | ATX/Micro-ATX/ITX |
| Expansion Slots | 7 Slots |
| I/O Port | USB 3.0 x1, USB 2.0 x1, Audio x1, Type-C x1, LED & Reset Button and Power |
| Dust Filters | Top & Bottom |
| Fan Support | Top: 120mm*3 / 140mm*2 Bottom: 120mm*3 Beseplate: 120mm*3 / 140m*2 Rear: 120mm*1 |
| Radiator Support | Top: 360/280/240mm Baseplate: 360/280/240mm |
| Max CPU Cooler Height | 160mm |
| Max GPU Length | 400mm |
| PSU Length | 240mm |
| Pre-installed Fan(s) | Rear: 1x 120mm ARGB & PWM Fan |
 |  |  |  | |
|---|---|---|---|---|
| Dimensions | 16.7 x 11.2 x 15.7 inches | 18.5 x 8.1 x 17 inches | 17.8 x 8.7 x 16.1 inches | 16.8 x 8.3 x 15.8 inches |
| Motherboard Support | ATX /Micro-ATX /ITX | ATX /Micro-ATX /ITX | ATX / Micro-ATX /ITX | Micro-ATX / Mini ITX |
| Max CPU Cooler Height | 160mm | 160mm | 160mm | 166mm |
| Max GPU Length | 400mm | 400mm | 325mm | 345mm |
| Fan Included | 1x 120mm Fan | 3x 120mm Fan | 1x 120mm Fan | 1x 120mm Fan |
Good case but...
I do like this case, but I had to literally cut a 2.5″x5″ (inch) square out of the bottom of the case in order to fit the 360mm CPU cooler (CoolerMaster if it matters). I wanted the radiator and fan to be mounted on the side of the case (next to the motherboard) which according to the description the case can accommodate this. This part is very untrue. For one the reality is that all the 360mm CPU coolers have to actually be longer than 360mm because it has 3 fans that are each at the standard 120mm design, so 120×3=360… this does not account for the tanks at each end of the radiator that must extend beyond the 360mm total length of the fans because the tubes need to connect into the radiator somewhere and the fans cannot be in the way, so therefor I have not found a CPU cooler with 3 fans that is truly 360mm or less, which is about how much space that is given from top to bottom to mount fans (and supposedly a CPU radiator) I imagine a 360mm CPU cooler could fit across the top of this case, but that was not my vision and I feel with such a nice display case, putting a large RGB radiator and fans on top would look sloppy. Since I did not want to return it and I felt the alternative one I found (though I liked that one had glass that was much more frameless, I felt ventilation was more obscured and I like good air flow) was just not what I wanted and would take longer to arrive. So I measured and cut out a rectangle large enough to fit in the radiator with the fans and it worked out good overall, but still alot more work than expected and I was not happy I had to do this to begin with when the description claims my equipment would fit there. So, despite this I have built my dream machine and I love how it came together overall. I like that it has glass on the side AND the front, the power supply is behind the motherboard instead of underneath and all the cables are well hidden, which by the way there is tons of room behind the motherboard and radiator to hide all the wires. So in the end I do totally love this case and the build overall. I even added 2 extra fans behind the motherboard, one directly behind the CPU and the other behind the radiator in the 1.3″ void from backside of radiator to outside vents on the side of the case. I will say, while cutting the sheet metal on this case I discovered it was thicker than I expected, it took a bit to cut through. Most screw holes lined up well but some could have been more accurate. Overall it all worked out and again I love the outcome of this build.
Intel i7 14700K
CoolerMaster MasterLiquid 360L Core ARGB
Gigabyte z790 Gaming X AX
G. Skill 32GB DDR5 RAM 6000mHz
MSI Ventus3x GeForce RTX 4080
EVGA 1000W Gold Power Supply
The remove-able plates on the back that expose the gpu display ports, are breakaway. Could use some more rubber covers for the wires too. The exact type of things you’d expect from a case at this price point. Hard to complain for this price though.
The remove-able plates on the back that expose the gpu display ports, are breakaway. Could use some more rubber covers for the wires too. The exact type of things you’d expect from a case at this price point. Hard to complain for this price though.
For the price it's an awesome case. More than ample room for the largest GPU. The front will not accommodate all 320mm radiators so measure yours first. I had to top mount mine, but prefer that config anyway. The top panel has all the usual bells and whistles and easy to install as all the connectors were labeled properly. Top USB ports nice and fast. It did come with one RGB fan which I couldn't use with my Asus mb. Love the strip LED panel on the outside front. Push button control of it pretty cool too. All in all I have zero complaints. Only one 2 wishes though - one, that it had more 3.5 HD mounting bays in back (only one 3.5 and two 2.5s). I'll have to modify something eventually when I go to add a 2nd 20gb. And two, that the side air vent had a dust filter also. Everywhere that sucks air needs one and this case only has one for the top (exhaust) and one for the bottom (intake). For now since the back of my box is hidden against the wall I have a makeshift ac air filter taped over it. Oh, very responsive support too. I messaged them a question I had and they replied same day. Happy buyer.
For the price it’s an awesome case. More than ample room for the largest GPU. The front will not accommodate all 320mm radiators so measure yours first. I had to top mount mine, but prefer that config anyway. The top panel has all the usual bells and whistles and easy to install as all the connectors were labeled properly. Top USB ports nice and fast. It did come with one RGB fan which I couldn’t use with my Asus mb. Love the strip LED panel on the outside front. Push button control of it pretty cool too. All in all I have zero complaints. Only one 2 wishes though – one, that it had more 3.5 HD mounting bays in back (only one 3.5 and two 2.5s). I’ll have to modify something eventually when I go to add a 2nd 20gb. And two, that the side air vent had a dust filter also. Everywhere that sucks air needs one and this case only has one for the top (exhaust) and one for the bottom (intake). For now since the back of my box is hidden against the wall I have a makeshift ac air filter taped over it. Oh, very responsive support too. I messaged them a question I had and they replied same day. Happy buyer.
Gorgeous Aesthetics, Reasonable Price
While this case competes directly with the popular LIAN LI O11 and the ZXT H9 Flow, in my opinion Vetroo was able to improve on those designs with a cleaner overall aesthetic while selling it at a more competitive price. There’s a lot of room for hiding cables, a USB-C top connector, and the built-in LED strip on the front looks great with the hexagonal pattern.
There are two caveats: first, just because the graphic shows a 360mm radiator is able to fit vertically on the right side of the case, doesn’t mean that every 360mm radiator will fit. So if you are determined to place a radiator there instead of at the top, you may need to measure it first.
Second, while the dust covers on the top and bottom are great, there is no dust cover on the right side of the case. As long as you have those fans blowing out it shouldn’t be a problem.
As a side note, I contacted Vetroo’s customer service about a cable issue, and they responded very quickly, communicated clearly, and went above and beyond to help me. So I not only recommend this case, but also Vetroo as a company.
So so
(Word of advice) – remove the gpu socket before installing the motherboard.
Not bad.. but I do not feel satisfied with this product.. any way is not a better one on the market.. price is two higher for this cases.. so its good enough..
Roomy
This is my second case for the build because there was not enough room in the last case for the graphics card. I like the wide open look.
Pros: lots of space inside, can fit 10 fans
Cons: No rubber holes for cable management, back brackets need to be broken off instead of being set by a screw so you can close that hole if you decide too.
Overall: I like this unit for the price and would recommend it to someone looking to use a larger graphics card.
Overall everything about thus tower is amazing. My only complaint is the lack of covers for the wiring. Wire running and spacing in this tower is a breeze. Offers plenty of ventilation and plenty of room for parts. Fits full size Atx PS and it can fit Atx, Micro Atx and Itx. I ran a Radeon 6950XT GPU and there is still plenty of space for more. If you are looking for a sturdy, spacious, and we'll ventilated tower then stop here. For the price I have not seen any other tower that is as nicely crafted as this one.
Overall everything about thus tower is amazing. My only complaint is the lack of covers for the wiring. Wire running and spacing in this tower is a breeze. Offers plenty of ventilation and plenty of room for parts. Fits full size Atx PS and it can fit Atx, Micro Atx and Itx. I ran a Radeon 6950XT GPU and there is still plenty of space for more. If you are looking for a sturdy, spacious, and we’ll ventilated tower then stop here. For the price I have not seen any other tower that is as nicely crafted as this one.
The only issue with this spacious beauty is that I suck at perfecting my wire management skills. It’s so good and cheap I decided to buy another one for my girls build she loves the LED strip. Only real issue is your gonna need a wire management master mind to make it look good in the back but 100% good
The only issue with this spacious beauty is that I suck at perfecting my wire management skills. It’s so good and cheap I decided to buy another one for my girls build she loves the LED strip. Only real issue is your gonna need a wire management master mind to make it look good in the back but 100% good
Huge +rep for the packing foam, which is the expensive and sturdy kind. This case was a breeze to build in and the aesthetic is excellent. Great dust filters, plenty of airflow, spacious cable management space, and the I/O cables are nice and flexible.
Huge +rep for the packing foam, which is the expensive and sturdy kind. This case was a breeze to build in and the aesthetic is excellent. Great dust filters, plenty of airflow, spacious cable management space, and the I/O cables are nice and flexible.
Very Good Dual Chamber Case
Great good case for the price. Plenty of room and mounting options for cooling.
It would have been nice to see some stuff like rubber grommet covers for the metal cutouts where you pass your cables through or an included argb control box versus the single press button on the top of the case. The included RGB strip and RGB fan do give the case a little flair if you don’t have your own to add right from the start.
The thing that caught my eye was that it is Satin and not a matte pain job like some other cases I’ve used. The lights bounce around MUCH more fillingly in my opinion.
It makes the interior of the case really light up. I darkened the images to compensate and still looks great.
For size comparison, it is capable of a 360mm rad on top, and a full length Taichi 7900XTX with room to spare. There was enough room on the back side of the bottom with the fans that I was able to add a GPU stand.
Pretty nice case.
Lots of room/easy to work on .
Will take a 400mm video card. Plenty of space to put the cables in, USB-C (amazingly rare in cases).
Decent airflow.
There is enough room for a 360 water cooler on the bottom, but, for this case I might recommend getting a 280 instead.
The Vetroo AL700 Mid-Tower ATX White PC Case is an absolute marvel that surpasses expectations on every front. From its sleek aesthetics to its outstanding performance, this case delivers an unparalleled experience for PC enthusiasts.
Visually, the AL700 is a work of art. The white exterior, complemented by dual tempered glass panels, exudes elegance and sophistication. It effortlessly stands out among its competitors, making it a perfect fit for users looking to showcase their PC in style. The high-quality materials and flawless construction contribute to its premium feel, leaving no doubt about its durability.
Inside the case, you’ll find a spacious and intelligently designed interior. It comfortably accommodates ATX motherboards and allows for easy installation of components. The ample room for high-performance graphics cards, multiple storage devices, and efficient cable management ensures a clutter-free and efficient setup. The AL700 is a dream come true for those seeking customization options, as it provides numerous drive bays and SSD mounts to expand your system effortlessly.
When it comes to performance, the AL700 shines brightly. It boasts excellent ventilation, ensuring optimal airflow to keep your components cool even during intense gaming sessions or heavy workloads. The cleverly positioned fan mounts and removable dust filters make maintenance a breeze, ensuring that your PC remains in top-notch condition without much effort.
Another notable aspect of the AL700 is its versatility. It is compatible with a wide range of hardware configurations, making it suitable for both gaming enthusiasts and professional users. Whether you’re building a powerful gaming rig or a multimedia workstation, this case caters to your needs with ease.
Overall, the Vetroo AL700 Mid-Tower ATX White PC Case is a true gem that earns its 5-star rating without hesitation. Its stunning design, spacious interior, excellent performance, and versatility make it a top choice for anyone looking to build a high-end PC. If you’re seeking a case that combines style and functionality seamlessly, the AL700 is an investment worth making.