Car Phone Holder Air Vent , TOPK 360° Rotation- Upgraded
Car Phone Holder Air Vent , TOPK 360° Rotation- Upgraded Hook Clip Universal Phone Mount for Car Compatible with 4.0 to 6.7 inches Phones
Car Phone Holder Air Vent , TOPK 360° Rotation- Upgraded Hook Clip Universal Phone Mount for Car Compatible with 4.0 to 6.7 inches Phones
Car phone holder ( Air vent)
This car phone holder is of great quality. It has good grip on the car air vent. It’s easy to install. I have being using it for while now no issue at all. You can easily rotate it to your desired angle. Holds the phone with good grip no fear of falling. Great product.
Only had a few days - Initially very positive
Have just fitted to Toyota Avensis. When I received the product, I was a bit concerned that there was only one hook to go on the vent and couldn’t see how it would be stable. However, I then noticed the grooves on each side of the hook which also grip onto the vent and stabilise the holder when the locking nut is tightened. Overall the construction seems very solid and fitting was super easy (2 minutes!) on my car. I also like the close/quick release mechanism (works great on a Samsung A32). Time will tell how well this type of fitting (grill mount) works when driving over our pot-hole roads but, as of now, I’m quite impressed.
Good little holde
Took me a little bit of time to figure out how to attach but then once I’d cracked it the holder went on no problem..
So far it’s held up to a few journey’s and allowed me to argue with sat nav ‘face to face ‘ it did droop a little bit and I had to repositioned it a few times but they could be how I’d had it placed.. My passagner tried it out with their phone to see how it held up to different sized and it had no problem with thei
Another one!
This is the second one of these I have bought, the first one is still going strong! But I thought I’d get another, as they’re really good.
The most sturdy of all the ‘air vent’ holders.
Fits securely to the vent and holds the phone reliably
Until now I’ve been using a similar vent-based phone holder from Halfords. This one is a vast improvement for two reasons. Firstly, the way it attaches to the vent is with a hook that grips the back of one of the vent blades and once screwed tight can’t come loose (my previous holder used a sprung clamp that would occasionally work loose). Secondly, and most importantly from my perspective, is that it has a ledge at the bottom that prevents shiny glass phones from slipping out, which my previous holder lacked. This ledge has a gap so that the charging port is not obstructed.
In all, this is an ideal solution if you use your phone for navigation while driving. It allows you to mount it in a sensible position without obstructing your view out of the windscreen (something that might get you in trouble if stopped by the police).
Does the job.
This will work on the correct ventilation slot and holds the phone well. Always remember not to allow hot air out of that particular slot and never use a mobile phone whilst driving.
Sceptical at first, but fits very well and very secure
I was sceptical that a phone holder that clips onto your vents would secure your phone enough. However, I am very pleasently surprised that it fits on very securely and holds your phone steady. It is adjustable and has a notch at the bottom for the charging cable to fit through. Did take a while to figure out how to attach but was fine after RTFM. Very good pruduct at the price point, I would recommend.
Car Phone mou
Good quality / good construction Car Phone Mount. Secure fitting via metal adjustable hook. Padded / soft materials to reduce damage. Compatible with most phones from 4.0 – 6.7 inches in size. Easy to fix in place and suitable for most vehicles apart from those with round vents as per manufacturers blurb. Quick release button and easy one handed operation.
All in all a nice, inexpensive and well constructed Phone mount that will fit most Phones / Cars.
Easy to install, secure and works very well
If you use your phone as a sat nav then this is a worthwhile purchase. I fitted this to the air in my car within a couple of minutes and it seems to be very secure. I have recently done a three hour car journey and the phone was held in place securely the whole way. It’s very easy to adjust the cradle and I really cannot think of any negatives. Great buy.
Serves the purpose well
The phone holder fits into our air vent well. It is stable and durable. It holds the phone well even on bumpy roads. It can rotate 360 deg so could keep the phone vertically or horizontally on our choice. It has a single push release button to release the phone.
Does exactly as it is supposed to - holds your phone whilst driving!
What I really liked about this phone holder was the metal clip to grip the heater vent. Previous holder I bought had a plastic clip, which broke after 2 days.
The other great thing about this holder is the distance is sticks out from the vent. The other model I had meant it was easy to hit the holder when using the indicator. This phone holder is shorter in depth so no worries about bashing it.
Easy to extend side arms, just press the button on the side. Lower holder, just pull dow, place phone in holder and then push the side arms in to grip your phone. I tested the ability of the holder to hold my Honor 8x, 6.5″ screen whilst going down a track with some good pot holes. No issues, held the phone solid.
All in all a good quality phone holder.
Makes my life whilst driving so much easier..
This car phone holder is by far the best I’ve ever used. I didn’t realise there were such sturdy, trustworthy and agile models on the market.
I’ll start off by saying my previous holder from another brand caused me stress whilst driving. This was an old technology holder that “pinched” one ‘slat’ on the vents. Over time it lost grip and constantly fell off, leaving my phone and holder in the footwell beneath my pedals.
Finally, with this TOPK phone holder I can drive stress-free because this product uses a different technology altogether. It relies on an adjustable hook which hooks around the back of one ‘slat’ on the vent, and then you tighten it with the built-in screw so it doesn’t fall off. I was skeptical at first, and when I realised I had vertical vents I thought this wouldn’t be compatible with my car but I was wrong.
I have attached photos to show the holder securely mounted on my vertical vents. I am seriously impressed that it hooks onto vertical vents as it’s literally working against gravity.
When I forcefully wobble the holder there is very little movement. So far the holder has stayed tightly in place without moving, and it grips, and holds a heavy phone up successfully. I have to drive off-road over pot holes and tracks almost everyday and it still hasn’t budged.
Long story short: the holder stays in place, it’s easy to fit, it rotates to a variety of useful angles, it fits on horizontal and vertical vents and finally, aesthetically it looks very smart and modern in my car. I would recommend this phone holder 100%. Impressive product!
Air vent phone holder.
Perfect for when you need to use your phone’s GPS or maps while driving, as this vent-phone holder is strong enough to hold the phone while you’re driving. With it being vent mounted, it’s perfectly within the driver’s eyeline for when they glance at the map apps. It also stops the phone from sliding around the dashboard and being a distraction.
Works well
We have the larger version of this phone holder that has both the dashboard suction cup and the vent mount options. We’ve always preferred the vent mount style out of the two so when we were looking for an additional holder for another of our cars, this seemed like a good option to choose.
The phone holder fits onto the car vents quite easily and is tightened into place using the screw on the arm. Once in place, it is sturdy and doesn’t move around so it hasn’t been a problem using this on the roads. The phone has an adjustable cradle that will suit a variety of phone sizes and it’s easy to put your phone in and out of this quickly enough.
This works well as a vent car phone holder if this is the style you may be looking for.
Good for either centre or side vents.
The ‘Car Phone Holder Air Vent , TOPK 360 Rotation- Upgraded Hook# arrived in a branded box; which also contained a user manual.
The back surface of this holder has a stylish finish, and is a bit taller than some others I have seen. The holder itself uses a push button to automatically widen the holding arms of the phone holder.
The important bit is the hook mechanism which has 4 locating bumps; these help keep the bracket in position when tightening the hook and maybe will reduce the risk of a vent fin being distorted if over tightened. The important thing to remember is to only tighten the hook as much as needed to keep the hook stable.
Attaching the holder to the hook, is just a case of loosening the nut and pushing onto the ball, but again gently as you are putting force on your vent fins.
Vent holde
I have a a quite large phone what is also quite heavy and that makes I wasnt sure whether the way that holder is built would be able to hold steady (especially with my driving)without causing any damage to the car’s air vents or falling off
I’m pleased with the way that it is manufactured, prevents any damage to your car and it can hold your phone securely. Also if you like to have hot air constantly blowing out your vents I wouldn’t recommend.
It looks like a robust product that will manage to withstand the test of time.