Clearwater CH0009 Water Clarifier for Hot tub Spa
Clearwater CH0009 Water Clarifier for Hot tub Spa and Swimming Water Treatment for Pristine Crystal Clear Water, 1 Litre
1. Ensure all algae is pre-treated
Pre-treat any existing algae with algaecide 24 hours before using the clarifier. This releases any algae clinging to the walls of your pool/spa
2. Adjust the pH between 7.2 -7.6
Make sure the pH level of your water is between 7.2 and 7.6 before using the clarifier. You can use the Clearwater pH Plus and pH Minus to do this
3. Gradually apply the clarifier direct to the pool water
Measure out the recommended amount of clarifier (as stated on the bottle) and pour directly into the pool water whilst the pump is turned on, preferably near the water inlet to aid distribution
4. Keep the filter turned on until water is clear
Keep the filter turned on whilst the clarifier is working to ensure the broken down particles are filtered out
Dimensions: | 24.69 x 8.9 x 8.7 cm; 898.11 Grams |
Model: | CH0009 |
Part: | CH0009 |
Manufacture: | ClearWater |
Dimensions: | 24.69 x 8.9 x 8.7 cm; 898.11 Grams |
Didn’t seem to keep the water any better than not using this product. Maybe it was me and I don’t use it properly maybe it was the product. I can’t say for sure so I can’t really knock it all I know is using this didn’t make any difference.
Absolutely great for cleaning the water after being stood for a few weeks.
The pool only goes up for a couple of months, three at most. With good chlorine and pH control, regular filter running even when pool not used, we still get a tinge to the water. This stuff works a treat, crystal clear again in no time.
The product has easy to follow instructions and dosage is all depending on the size of the hot tub. It seems expensive for what it is but is a must to keep the water crystal clear.
I’ve used this a few times as instructions, my waters pretty clean maybe that’s where I’ve gone wrong I was hoping for that sparkle like the day I filled it, did it make a difference ? Not in my opinion.
After setting up the hot tub this summer after a couple of days we had all this white stuff floating around, I’ll be honest it literally looks like dead skin I didn’t have a clue what had happened or what it was & then it clicked! This was of course a build up of biofilm! It was simply where the main filter unit has been stored for months with dampness and when in action again all the gunk was dislodged. Anyway, don’t freakI bought this product and Algaecide Algae Remover, following instructions no joke within 24 hours the water was crystal clear! I now use both products every week where I also clean the filter. It’s 100% keeping the hot tub clean and fresh. We have just changed the water for the first time in 8 weeks – madness! Highly recommend.