Cooler Master MasterLiquid 240L Core ARGB CPU Liquid Cooler
Cooler Master MasterLiquid 240L Core ARGB CPU Liquid Cooler – Dual Chamber Gen S Pump, Superior Radiator and 120 mm ARGB Fans, LGA 1700 and AM5 Brackets – Black
AIO Liquid Cooler
Cooler Master MasterLiquid 240L Core ARGB
The popular MasterLiquid Lite Series brings affordable, high-quality and high-performing all-in-one liquid cooling solutions to novices and experienced builders. The L-Core ARGB coolers feature an updated, clean design and high-quality components for improved cooling capabilities.
Re-Engineered Copper Base
Dual Chamber Gen S Pump
Features boosted water flow and pressure; copper base targets heat spots with increased precision.
Increased Surface Area
Enlarged Radiator Fins
Deeper radiator fins provide highly-efficient heat dissipation along the wider water channels.
Optimised Cooling
120mm ARGB Fans
Quietly (27.2 dBA) provide increased airflow (71.93 CFM) for optimal radiator performance.
Universal Design
Socket Compatibility
The universal CPU brackets have been updated to be compatible with the latest Intel and AMD CPUs.
Clean & Modern
Revamped Design
The original MasterLiquid Lite design has been updated to a clean look with ARGB for sleek builds.
LGA 1700 BracketThe MasterLiquid L-Core liquid coolers are compatible out of the box with the new Intel LGA 1700 platform. The LGA brackets use the same screws, reducing the extra parts in the box.
” data-position=”triggerHorizontal” />
MasterLiquid L-Core ARGB
MasterLiquid Lite
MasterLiquid L RGB
MasterLiquid R RGB
MasterLiquid Illusion
MasterLiquid Mirror
| Weight: | 1.31 kg |
| Dimensions: | 15.7 x 11.96 x 2.72 cm; 1.31 Kilograms |
| Brand: | Cooler Master |
| Model: | MLW-D24M-A18PZ-R1 |
| Colour: | Black |
| Batteries Included: | No |
| Manufacture: | Cooler Master |
| Dimensions: | 15.7 x 11.96 x 2.72 cm; 1.31 Kilograms |
Parfait, refroidis bie
Rapport qualit prix je ne sait pas si il y a mieux
acheter 80 d’occasion sur amazon, trs ” bon ” venue neuf, rien n’a tait ouvert, ventilateur fond le processeur reste 25*, au minimum des rpm ventilateur, le processeur est 50* max… magnifique
Zufriede
Die Leute beschweren sich immer darber, dass AIOs laut sind. Die Sache ist AIO und Stille kommt nie zusammen. Dieser AIO ist laut, aber Sie knnen die Geschwindigkeit seiner Lfter steuern. Das habe ich getan, es ist jetzt nicht laut und nicht hei. Das Beste an diesem Produkt ist, dass es bei weitem einfach zu installieren ist. Ich habe 6 verschiedene AIOs fr meine Purebase 600 ausprobiert. Entweder haben sie einen zu groen Khler oder sie sind zu teuer. Dieses spezielle Modell wrde in die meisten Mid-Tower passen und seine Kabel baumeln nicht, sodass es einfacher durch die winzigen Lcher der Rckplatte gefhrt werden kann. Dank Cooler Master musste ich meine CPU-Sockelhalterungen nicht komplett austauschen. Sieht fantastisch aus und funktioniert perfekt.
Optisch sehr schön, Lüfter können aber sehr laut werde
Die Wasserkhlung ist sehr schn und macht was her.
Leider ist die Khlleistung mit 2 Lftern nur okay.
Im IDLE habe ich bei einem Intel i7 14700k 30-50 Grad.
Knnte besser sein….
Leider war keine Anleitung beim Produkt dabei, also musste man probieren.
Quiet. Looks good.
Looks good.
Quiet
Easy to install
Managed to get a great deal for Black Friday. So had to pick one of these up for the price. Even though it almost didn’t fit in my case. Was worth it. Argb is hands down nicer than rgb
Great!
No issues at all from this, quiet and runs smoothly. Came with everything needed to install, 2 bracket types, thermal paste, the lot. Looks great too! This was so easy to install which was great as this is my first liquid cooler.
Perfect for big case
Coole
I ordered this cooler around 2 months ago, and it has been amazing. I had an air cooled Alienware pc so was skeptical if it would fit or not. However, it was really easy. Temperatures have been excellent, stays around 65 degrees under load and around 40-45 on idle. Sound is extremely quiet aswell. However, AMD brackets were not included so I used intel brackets instead, a bit of an issue but it worked nonetheless.
works very well, and quite too
It’s a bit of a squeeze to fit in your case if you don’t have a top case vent. I managed to fit it in – just. Check before buying. Works well. PC case also acts as a heat sink too. So expect your case to get warm. It quite and you can only hear it above the PSU fan when running fast action games.
So to address the elephant in the room… I know it’s not correct for the G20 pc, but as parts are impossible to get hold of now I had to compromise. That aside…
This was a great value purchase for what you get!
Downside is that you have to TOTALLY dismantle the pc (or at least remove the motherboard) to get to the back of the CPU to change the mountain bracket.
What I didn’t like however, was you have to remove the square lockdown CPU surround (that holds down the processor) in order to fit the mounting bracket for this… That results in the CPU relying totally on the coolerpump to hold it in place with thermal paste. (I.e. If you remove the pump, the CPU lifts out too stuck to the underside of it by the thermal paste).
The fans are a little noisy, but…. Because this runs much more cooler than the heatpipe/fan setup it had from factory the fans are slower mostly. Only more noise when ramped up.
I do like it… and it does run cooler and was a good price… So that overrules the negatives in my mind. BUT I can’t believe they make you remove that CPU lock down. Not impressed with that part of it.
I already have a lot of Corsair water cooling kit in one PC and needed to fit an AIO to a new build I was putting together. Corsair kit is fine but costs an arm and a leg, plus I did not need any RGB bling either.
Looking around I found the Cooler Master Master Liquid Lite 240 CPU Liquid Cooler and it was the best solution I came across. I went ahead with the purchase despite a number of one star reviews saying that they leak, the pump/fans are noisy or fail, the fans are impossible to screw into the radiator and whatever. My experience was and has been the reverse so far. It arrived on time, packaging great with the pump, radiator and fans well secured. It all looked like quality kit and the fans could be EASILY fitted to accommodate a push or pull configuration depending on what case or set up you required. As for noisy fans, I have to keep checking that they are actually turning as they are so quiet in normal desktop and gaming use. Installed and running since mid January and only good things to report. If that changes I will eat my words and update this review. But for now my advice is don’t overlook this one if you need a non RGB AIO cooler.
For the price this is a brilliant coole
I went for this cooler because the stock cooler just wasn’t cutting it in game. During one session of Division 2 the temps were hitting the 80s so I thought I’d invest in something new.
I was deciding between this and the V2 but went for the v1 instead because of the price gap
One thing to note is I’d never built a pc before, so I knew what I was looking for but no idea how to implement it. Anyway it turns out it was simpler than I thought.
I removed the stock cooler, cleaned the CPU, installed the brackets that came with the mother board, one blob of thermal paste connected it and there you have it. Now temps barely touch 58 du omg intensive games and it’s idling between 30-40 degrees.
One thing I did was change the stock fan that came with the cooler. The fan has noisy bearings and I already had a set of deep cool fans in my case so went with that. The only sound I have now is the sound of the pump which really doesn’t bother me at all because it really isn’t loud.
I’ll definitely upgrade to something better in future but for now this will do me.
Short overview of my system:
Windows 10 Pro 64-bit|AMD FX-8320|32GB DDR3 1600MHz|Gigabyte 990FXA-UD3 Rev. 4.0|MSI R9 290 Gaming 4GB|2x Corsair AF-120, 1x Corsair AF140, 2x Fractal R2 Silent Series 140|CM GM750|CM 690 II Advanced (USB 3).
I probably could’ve gotten away with just replacing the thermal compound on my old Hyper 212 Evo that had a stock Cooler Master fan. But, to be honest, it’s also a pain to work around inside of the case, and I also intend to upgrade to Ryzen some time soon. So I decided to retire the Hyper 212 Evo, and go AiO with this MasterLiquid Lite 120.
As far as assembly and installation goes. It was simple to put the necessary brackets on for my CPU, although I wish they had some kind of grommets to help keep the backplate in place–it’s a bit of a challenge with just two hands. This, however won’t affect my rating.
Installation of the radiator was a bit of a headache, but that’s more down to my case, the CM 690 II Advanced (USB 3). Near the rear fan mount, there’s a clip that I guess is meant for cable management, if you’re only going to use a rear exhaust fan, and doesn’t facilitate a radiator that well. So I had to get a little creative to ensure the area was flat enough that I could screw/secure the radiator. Whether intentionally or not, I had enough accessories/fittings that I could easily go for a push/pull config.
That stock fan that comes with the MasterLiquid Lite 120 is audible. But honestly, while gaming with a headset on, it hasn’t bothered me. Some may want to consider buying a third-party/aftermarket fan, such as a Corsair Air Series SP120. The pump is only really audible on initial boot.
Some quick results–not super scientific. I ran Cinebench a few times:
Hyper 212 Evo: FX-8320 @ 4.2GHz and 1.42v–48C at idle, up to 71C at full load (100% all cores)
MasterLiquid Lite 120: FX-8320 @ 4.4GHz and 1.39v–28C at idle, 51C at full load (100% all cores)
I didn’t use the thermal compound that came with the MasterLiquid, however. I decided to use Noctua NT-H1.
While running games such as Mass Effect 2, which don’t max out all cores. I played for several hours with the temps being between 38-41C.
I’d happily give it a 5/5 rating.
UPDATE:
I’ve since made some major upgrades to my system. I’m now using this with a R7 2700X @ 4GHz. It idles at between 35-40C, and at full load reaches 56C.