PARKVISION AHD 1080P Reversing Camera HD 140° Rear View
PARKVISION AHD 1080P Reversing Camera HD 140° Rear View Camera, Metal Housing Wide Viewing Angle Adjustable Car Rear Parking Backup Camera 12V-24V Universal Wired Reverse Camera[PJ-115]
Flexible Mounting Camera
The body of this backup camera can be rotated 360 degrees, the lens can be rotated 45 degrees (right to left) + 45 degrees (top to bottom), giving you a perfect view in all possible positions.
Note: This 4-pin connection is between the camera unit and the power cable, it is not directly connected to the monitor.
Specifications
| Image Sensor | 100W pixel HD CMOS |
| Power | DC 12-24V |
| Resolution | 1920×1080P |
| Viewing Angle | 140° |
| Waterproof Grade | IP68 |
| Minimum Illuminance | 0.01Lux |
| TV-System | Standard PAL (NTSC can be switched by blue coil) |
| Parking line | Standard ON (OFF can be switched by white coil) |
| Signal | Standard CVBS (AHD can be switched by the little white plug) |
| Signal to Noise Ratio | ≤48dB |
| Working Humidity | 80%RH |
| Operating Temperature Range | -20℃ ＋65℃ |
| Storage Temperature Range | -30℃ ＋8O℃ |
Can it be connected to a DVR or dashcam mirror?
No, this will cause incompatibility and no image will be displayed.
Does this reversing camera fit my radio model XXX?
Regarding to compatibility, the most important thing is whether the radio matches the camera parameters and if they match, then they are suitable.
The camera has a 4-pin connector. Can I connect it directly to my 4-pin monitor?
No, it can’t. The 4-pin connector is between the camera unit and the power harness, not directly plugged with monitor, and the connector for monitor is standard RCA, you need to reinstall the wiring.
I followed the instructions to install the wiring. Why it does not work, no image displayed?
The wiring may not be correct, or there may be a problem with the camera itself. You can connect it to an independent display for testing. We recommend that you contact PARKVISION directly.
why do i get blurry image?
It is recommended to first check whether the radio settings match the camera parameters. Then follow the instructions in the product manual. If there is still no improvement, it is advisable to contact PARKVISION.