Pro-Lift Dent Puller, 2 Pack Car Dent Puller, Strong Suction
Pro-Lift Dent Puller, 2 Pack Car Dent Puller, Strong Suction Dent Remover Kit, Efficiently and Quickly Repairs Dents in Different Areas and Shapes of Car Body
From the brand
| Weight: | 79 g |
| Dimensions: | 10.2 x 7.2 x 6 cm; 79 Grams |
| Brand: | Pro-Lift |
| Manufacture: | FA |
| Dimensions: | 10.2 x 7.2 x 6 cm; 79 Grams |
| Reference: | labaqi-rb |
This jack seems to be of great quality. The force on the handle to extend under the front axel of my F350 diesel is low enough. The problem I have is when using the ram extension is roughly 3 inches, I used bricks to then keep the wheel up. The release is easy to use but the ram must then be pressed down(not convenient under the truck axels) the short 3” extension is about right to add a brick(2 2x4 are a tight fit) but that short extension and being under the axel just doesn’t work fo my main use.
This jack seems to be of great quality. The force on the handle to extend under the front axel of my F350 diesel is low enough. The problem I have is when using the ram extension is roughly 3 inches, I used bricks to then keep the wheel up. The release is easy to use but the ram must then be pressed down(not convenient under the truck axels) the short 3″ extension is about right to add a brick(2 2×4 are a tight fit) but that short extension and being under the axel just doesn’t work fo my main use.
Exactly what I needed
I had to do some repair to an exterior wall in which I had several rotten studs due to a water leak behind the shower. I used this jack to support the top plate as I removed the rotten studs. It didn’t have any problem with the weight.
It is not a long term solution for support as a traditional wall support jack would be as it will lose some pressure over time, but this can be used for other jobs as well and I only needed to support the wall long enough to replace some studs. I my not have needed the jack at all, but better safe.
This is a great product that I anticipate using for many years. I purchased it to use in leveling a 45 feet shipping container but imagine many uses in future years. It is everything I hoped it would be.
bought 2 of these 2yrs ago. used them for most of my lifting needs, changing tires on 30ft camper, lifting farm equipment slowly. very happy with the bottle jack itself, the jack handles aren't to my liking but functional. I prefer a one pc handle like the 2-2.5-ton jack handles available
bought 2 of these 2yrs ago. used them for most of my lifting needs, changing tires on 30ft camper, lifting farm equipment slowly. very happy with the bottle jack itself, the jack handles aren’t to my liking but functional. I prefer a one pc handle like the 2-2.5-ton jack handles available
I’ve used this to lift everything from the floor of my house to a truck with a flat tire.
Small, compact, but will lift 40,000 lbs. Ridiculous. But true. It fits under the seat of my truck!
The screw top makes it perfect for stepping up cribbing. Lift, add a couple inches, lift, add a couple more, then reset jack. Very helpful for lifting in small increments.
This is a lifetime jack, I’m fairly sure.
No complaints.
I replaced four columns in my basement that were supporting the floor above. The jack had plenty of power and I had no problems. It retracts slowly and needs a little help. I would buy this jack again.
Its cheap but it does not hold
A little update on this product afther using it for a wile i find out that u got to tighten the bolt and it holds it may lower depending on the weight thats holding but its holding good product for the price