Room Thermometer, LCD Digital Hygrometer Thermometer, Indoor
Room Thermometer, LCD Digital Hygrometer Thermometer, Indoor Thermometer with Temperature Humidity Monitor for Bedroom, Baby Room, Warehouse, Cellar, Car.
Indoor thermometer
Emoji display
Drying: 10%RH – 39%RH.
Humidity: 99%RH – 71%RH.
Comfort: 40%RH – 70%RH.
A vivid smiley face indicates the comfort level of the room, letting you know at a glance what’s changing in your home and whether to humidify or dehumidify, providing the utmost care for you and your family
High Reliability & Accuracy
The thermometer for room temperature is compact, intelligent, easy to use, and has various installation options to meet your different needs: stand, wall mount, paste mount. Using double-sided tape and hanging holes, you can stick it or place it wherever you like. Not only is it light and compact, but it is also easy to put in a pocket and can be placed anywhere in the house or taken outdoors with you.
Multiple placement options
Bracket type, wall-mounted type, stick-type installation, can meet your different needs. The room temperature thermometer is compact, intelligent, easy to use, and has a variety of installation methods. With double-sided tape and hanging holes, you can stick or place it anywhere you like. Not only is it lightweight and compact, but it’s also easy to carry in your pocket and can be placed anywhere in your home or taken with you outdoors.
1. Please let the greenhouse thermometer and humidity stand for 10-20 minutes for the first use. The temperature and humidity reading will gradually become consistent.
2. （!Important)To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents
3. （!Important)Make sure the display is positioned away from moisure sources.
4. Do not clean any part of the product with benzene,thinner or other solvent chemicals. When necessary, clean it with a soft cloth.
5. Never immerse the product in water. This will damage the product.
6. Do not subject the product to extreme force, shock, or fluctuations in temperature.
7. If digits are missing, please turn it off, wait for 10 seconds, then turn on again.
 |  |  |  | |
|---|---|---|---|---|
| Packing Specifications | 1 Pack | 2 Pack | 4 Pack | 6 Pack |
| Temperature Range | -10℃~60℃, ±1℃ | -10℃~60℃, ±1℃ | -10℃~60℃, ±1℃ | -10℃~60℃, ±1℃ |
| Humidity Range | 10%-90%, ±3% | 10%-90%, ±3% | 10%-90%, ±3% | 10%-90%, ±3% |
| Battery Replaceable | ✓ | ✓ | ✓ | ✓ |
| Temperature Refresh | Refresh every 10 seconds | Refresh every 10 seconds | Refresh every 10 seconds | Refresh every 10 seconds |
| Weight: | 25 g |
| Dimensions: | 4.3 x 0.03 x 0.03 cm; 25 Grams |
| Model: | YS-28 |
| Part: | YS-28 |
| Colour: | White-1 |
| Batteries Required: | Yes |
| Batteries Included: | Lithium Manganese Dioxide |
| Manufacture: | OPPERD |
| Dimensions: | 4.3 x 0.03 x 0.03 cm; 25 Grams |
Sits on my desk – lets me know when I’m being a sissy, e.g. if I’m thinking of turning on the heating when it’s not really all that cold!
I checked both thermometers against an industrial electronic thermometer and they were well within the declared accuracy. I think its best to mount them on a vertical surface as illustrated. Its possible that if you stand them on a flat surface they may be a bit slow to respond as air needs to circulate through the top and bottom slots.
Have them all over the house and find them useful for the temp! One fell on the floor and the magnet in it fell out so that’s a little frustrating as Everytime you try to put it back it sticks to the battery, but nothing a bit of super glue can’t fix!
Bought the pack of four. Three out of four thermometers work but one arrived dead. The three that do function seem to be working well and giving clear temperature readings. Haven’t used the magnet but it seems to be strong.
When the thermometers arrived, I thought they only packaged 1 as the box was so small. Each thermometer is just over an inch squared. They are great thermometers and clearly show the temperature. I ordered 4 for work as our heating is rubbish. All 4 showed a very slight variation in temp by 0.1 degrees.
The magnet is not very strong and easily slips.
My main concern though is they were already powered on so not sure how long they will last until the battery dies
Updated: Regarding LL indicator, not flat battery. Bought a pack of two, one had blank sceen until I managed to get it’s battery aligned properly. Both compared favourably with a calibrated digital thermometer/hygometer. I thought the battery in one had gone flat after two weeks in but the LL indicator for RH was probably due to the humidity in a filament storage box had dropped below 10%, specified working minimum is 10% RH. As other reviewers have pointed out there is not an insulated strip to pull out so the battery is powering the device long before you receive it. How long will the battery last? I will update this review accordingly. I have just bought a second 2 pack, and again one arrived blank and needed better alignment of the battery for it to work. I will check their readings shortly, to be fair at this price do not expect laboratory grade devices.
It took 4 weeks to get my central heating fixed by engineer. Without any heating I had to use three oil-filed radiators keeping me warm. In order to know when I had to turn radiators on and off I was manually monitoring temperature. The added bonus of monitoring the humidity of water in the air was paramount as I was drying out the water damage. They were extremely useful!
My order was delivered fast and well packaged. The product was very easy to install and within 2-3 minutes I had them mounted on the walls at eye height for easy monitoring. Each device had a peel-off sticky fixer pad so I could stick one to my cupboard front in my home office and one on the wall in the home hallway.
The next few weeks I had no problems monitoring both temperature and moisture in the air from these small and easy to read thermometers.
After telling my friends and family about these devices my mum ordered a set for her home. I ordered another set of 2 myself. I obviously would happily recommend these thermometers.
10 months later in October 2023 the two thermometers still remain where they were originally placed and I use them daily.
The unit its self is very small and discrete, although small, its size is ample enough for a clear and visible display. It has a nice ” face display ” which is either smiling when humidity levels are good (below 70%) or a sad face when levels are higher than acceptable (70% or more).
The sensor comes with a self adhesive patch so it is easily applied to a wall or surface of your choosing. The sticky pad leaves no residue when removed so no need to worry about future troublesome marks on the wall.
Both the temperature and humidity display are very accurate. I’ve compared the temperature against my room thermostat and the humidity level against a dehumidifier. All of which were in alignment.
All in all a very pleasing purchase for the modest price paid (less than 5 at time of purchase). As such I am happy to recommend