2 Pack Kidde 5CO Carbon Monoxide Alarm, Ten Year Alarm

2 Pack Kidde 5CO Carbon Monoxide Alarm, Ten Year Alarm Sensor Life, AA Battery Powered (Replaceable)
From the brand





Winter Safety
Install a reliable CO detector in your home to give your family the warning needed to help prevent CO poisoning.
Weight: | 450 g |
Dimensions: | 14.6 x 25.4 x 7.8 cm; 450 Grams |
Part: | KEK5COX2 |
Colour: | White |
Batteries Required: | Yes |
Batteries Included: | Alkaline |
Manufacture: | Kidde |
Dimensions: | 14.6 x 25.4 x 7.8 cm; 450 Grams |
Reference: | KEK5COX2 |
As stated and quick delivery,
Bought to simply replace an old unit that had been in place for over 10 years.
New one just simply slides onto the old ones backing plate that is already fitted to the wall,
So simply interchangeable…..
Thanks
Put the batteries included in and it is good to go. It’s got a good little test sequence and does what it is meant to. The alarm has a very loud beep.
Not much can be said it’s a detector and we can only comment on its efficiency if we have a leak, which we don’t want. Looks good. Delivered in excellent time. Easy to install. Correct size for the space we had.
Good little CO detectors but strangely it was significantly cheaper to buy 2 single ones than a twin pack buy hey ho whatever and I like that these ones don’t have the stupid built in battery so are not limited if the battery fails prematurely.
This is a simple to set up carbon monoxide detector. Stick some batteries in and away it goes. Has a long life of ten years overall. Is small and unobtrusive but is loud enough to be heard in all areas of the house. Very happy with this purchase.
These CO monitors have replaced ones that’s use date had expired. Went for the same again as the earlier ones have proved faultless and the batteries still operational at 10 years old!! Just remember to press the test button a couple of times a year. Other than this forget them and know protection against CO build up is there. 🙂
There are many brands of detector to choose from, but we chose this well-known American Kidde model, which was actually recommended by a professional gas service engineer who recently worked on our boiler. We like this detector because it’s straight forward to set-up, install, test, and use. This is a twin pack, in each of the boxes you get:
1x detector
2x batteries
1x back plate (which you simply slide into position after fitting the batteries)
1x pack of raw plugs & screws
1x excellent guide
Once you have installed the batteries and backplate the unit is ready. Before deciding we’re to position the detector, you should test the device by simply pressing the large button on the front of the unit – if all is well you will hear 4 loud beeps, a pause, then another 4 even louder beeps, then a short beep and the unit will return to its normal standby mode. For peace of mind it’s best to test weekly. Anyway, we’re very pleased with this product – which is why I have no hesitation recommending it to fellow Amazon customers. Stay safe!