ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA
ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA, -0.03mm, 1kg(2.2lbs)/Spool,Black
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Net Weight | 1KG | 1KG | 1KG | 1KG | 1KG | 1KG |
| Printing Temperature | 200℃-250℃ | 190℃-220℃ | 190℃-220℃ | 190℃-220℃ | 190 °C – 220 °C | 190℃-220℃ |
| Bed Temperature | 80℃-100℃ | 50℃-70℃ | 50℃-70℃ | 50℃-70℃ | 55-70°C | 50℃-70℃ |
| Printing Speed | 40-80mm/s | 40-80mm/s | 40-80mm/s | 40-80mm/s | 30-60 mm/s | 40-80mm/s |
| Diameter | 1.75 ± 0.03 mm | 1.75 ± 0.03 mm | 1.75 ± 0.03 mm | 1.75 ± 0.03 mm | 1.75 ± 0.03 mm | 1.75 ± 0.03 mm |
| Weight: | 1 kg |
| Size: | Regular PLA-1KG |
| Dimensions: | 22 x 21 x 7.3 cm; 1 Kilograms |
| Brand: | ERYONE |
| Colour: | PLA-Black |
| Manufacture: | ERYONE |
| Dimensions: | 22 x 21 x 7.3 cm; 1 Kilograms |
| Size: | Regular PLA-1KG |
Nice stuff
As usual, Eryone filament never fails me. I printed some Multiboard panels from Keep Making, shelves and brackets will be fitted to it and hold all my fish tank gear. Adhesion was amazing, the parts were still stuck on a little after the bed cooled which I like. I can’t see layer lines at 0.2mm, and it printed fine at 300mm/s on bambu.
White went brittle in no time
Price was nice but the white filament became very brittle within a couple of days of opening. Had to throw like half of it away but if you get thru a lot of filament it’s a good buy
Amazing!!!!!
Love the Eryone brand of filaments, so easy to work with! Each spool is wound well and the quality of the actual pla is better than other brands I have used so far. Great adhesion and extrudes well. The colour palette available is also second to none!
Cardboard spools :(
Good finish, calibration hardly had to be changed from generic PLA on my Bambus.
The only issue was with the Bambu AMS – the cardboard spool was weak at the edges and frayed almost immediately. I tried spool rim rings but the fraying was already too much for them to clip on properly so I ended up with a universal outer spool to make it work.
In future I shall rewind onto a Bambu spool.
Let me start off by saying that this filament is some of the best I’ve ever used. I’ve gone through a variety of PLA filaments and have settled on Eryone’s filaments due to how great and consistent they print.
But there is something that could be considered a con with the filament, but its not really anything worth worrying about as it’s easily fixed – the filament is very forgiving in terms of adapting your settings.
At 200 degrees C, some layers take on a very shiny appearance, but then others are quite matte and dull. It’s the inconsistency at this temperature that is the concern. It’s only aesthetic though, and can be easily fixed by raising the temperature. I’ve found 215 to be a sweet spot for this filament.
On to the pros (and there are many), the overall vibe I get with the filament is that its very high quality and consistent once you get the temperature right.
I haven’t had any stringing at 200-215 C on my Ender 3 V2 or my Prusa i3 MK3S. The layer adhesion is great, and is comparable to a lot of other high end filaments such as prusament.
It is slightly lighter and slightly more flexible than Eryone’s galaxy purple for example, but that’s to be expected as those contain glitter particles which aid stiffness whereas this filament is plain jet black.
Print quality is extremely pleasant and has a beautiful shine. I’ve not noticed any brittleness, popping when printing, moisture issues or anything. I’m also very happy with the performance of the filament, it is a pleasure to print and is very durable.
My customers love the products I make using this filament and I really enjoy printing with it. Thanks!
Great vlaue for money but a little too brittle
I find that this filament prints very well once you get to know it. I find it can be very brittle in some circumstances, for example, if I finish a print on an evening and then start a new one the next morning the filament snaps at the point it enters the extruder, every time. I’m sure this could be solved with a filament guide, but this isn’t needed for other brands. Also, the first few meters of this reel were spooled poorly and snagged a lot. Once I got past the first few meters this hasn’t been an issue.