Range Tour Dash Cam Hardwire Kit, Hard Wiring Kit for Car
Range Tour Dash Cam Hardwire Kit, Hard Wiring Kit for Car Cam with Mini USB/Micro USB/USB-C Port 4m Car Charger Power Cord 12V/24V to 5V Charger Cable with 4 Power Adapters 3 Fuses for Dashcam GPS etc
How To Connect EachPart?
Fuse Tap Cable:
1. Pull out the original fuse you need at the car’s fuse box.
2. Insert the original fuse into the slot on the adapter. If the car fuse does not match the slot, please use our 7.5A fuse.
3. Insert the Range Tour 2A fuse into the other slot.
4. Select an interface that matches the automotive fuse socket(Mini/ATO/Micro/Micro2).
5. Connect the Fuse Tap Cable to the Red Wire
Red Wire:
Plug the connected Red Wire to the location where the fuse was removed from the car.
Black Wire(Ground Wire):
Connect the black wire to any metal part of the car(negative pole). Usually, there would be a bolt around used as a ground terminal.
Note:
Installation may require professional assistance. If you are unsure of the circuit system we advise that you hire a professional to do it.
Affordable and easy to fit no problems at all just had a quick look at a video on YouTube I’m there was no problems would recommend this to another buye
Reading reviews can sometimes be problematic. I wondered whether I had made the right choice with this one. However it works and did not take too long to get a neat installation. The only thing that was slightly difficult was inserting the fuse tap into the passenger fuse box (a ACS Mini fuse). However with a little patience it went in and all is now working well.
Comes with all bits needed I have a convertible and cigarette lighter was removed for push start so this was great for my dash cam connection to radio fuse with a piggy back fuse that is included in pack so it turns off with ignitio
This kit has pretty much all you will need to wire in a dashcam or other similar accessory and it includes an in-line 12v to 5v at 1.5A which ill power any USB device. The fitted plug is an angled mini USB and you also get a micro and type C usb plug which will cater for most devices. The adapter supplied allows you to piggy back a fuse holder into your existing fuse panel which makes a neat job and also maintains fuse protection for the circuits. A range of adapters are supplied for different fuse panel sizes as well as having longer pins to lift the adapter above any obstructions if needs be. Also supplied is a trim removal tool, a couple of cable tidies and even a small screwdriver, it has around 4m of cable as well.
Everything you need to hardwire your dash cam. I have mine on a lighter plug at present, so going to use this kit to make it more stable and pleasing to the eye. Must use the 2A fuse on the ACC line for the dashcam to make sure it only provides power when your ignition key is turned on.
Very simple to set up, just find your best rooute. Also comes with adapters for different cam models power connection.
CONCLUSION:
An affordable way to do a quick job yourself if you’re fit and able, and a massive saving too.
Recommended