2024 Graphene Ceramic Coating Kit 10H High Gloss Extremely
2024 Graphene Ceramic Coating Kit 10H High Gloss Extremely Hydrophobic Anti Scratch 10+ Years Protection Car Care Polish for Cars, Boats, Motorcycle & More
| Weight: | 230 g |
| Dimensions: | 11.3 x 7.9 x 7.6 cm; 230 g |
| Model: | 1 |
| Part: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Duoffanny |
| Dimensions: | 11.3 x 7.9 x 7.6 cm; 230 g |
If you prepare your car correctly for the application of this product, let it “flash”, or “half-dry” before wiping it off thoroughly, then it works great. Make sure you wear the supplied gloves though – I didn’t and my hands are now fully waterproof for the next couple of years.
Went on easy , buffed off easy with cloth provided. Dries well. Goes on well done a whole sportage and still enough to do a little left .
Used on plastics and headlights ( didn’t go for the windows ) so all in all it’s very well worth the money and the results are very good , as for how long it lasts who knows even summer would be good.
For the money it’s brillia
2024 Graphene Ceramic Coating Kit 10H High Gloss Extremely Hydrophobic Anti Scratch 10+ Years Protection Car Care Polish for Cars, Boats, Motorcycle & More
This ceramic coating certainly makes my car shine if applied correctly, and is reasonably priced as well. It was easy to apply to an area I tested and fairly easy to remove as well. It leaves the paint surface shiny and almost wet looking, so that is a plus point for me anyway.
One thing to bear in mind though is to get optimum protection you need to keep the car in a garage or similar and away from dust, water etc. For most people, this is completely unrealistic, and if this is needed for the 10 years claimed protection I can’t see much use for it. However, looking at it for a shorter period of protection it should be fine and seems to be still beading water okay. In all, I would not buy this for the claimed 10 years of protection which must be under an ideal environment, but would be fine to use for shorter periods or for layering of paint protection.
I decided to test out this graphene coating on a small section of my black car, approximately 10 cm in size, just to observe the outcome. I must say, it performed exceptionally well initially. However, I soon discovered that it needs a curing period of 2 weeks. The challenge I faced was the lack of a garage and the highly unpredictable weather in the UK. It’s quite difficult to properly carry out the curing process when the weather changes multiple times within a single day. In terms of quality, the product seems spot on, but the specific conditions it requires are quite demanding. I suppose I’ll most likely attempt the application during the summer months when the weather tends to be more stable. Hopefully, that will ensure the longevity of the coating! I’m giving it four stars, deducting one due to the challenging conditions it necessitates.
This product absolutely floored me in the most positive way. I drive a 2016 DS3 Sport in pearlescent black with blue mirrors and top and black wheels and rims. Naturally, you can see all the bits of mud, and it has been raining a lot around here.
I power-washed the car, then washed it with warm water and shampoo. Further, I rinsed it well and dried it with a special cloth. When the car was entirely dry, I started applying the graphene coating. There is a tiny sponge inside and several white cloths, as well as gloves, a microfibre cloth, and instructions. You wrap the tiny sponge in the white cloth, get a few drops of ceramic coating and apply it to the car. You must use up-down and left-right movements, as advised. Once you are done, you must wait for 3 minutes and polish the surface with the microfiber. I am beyond impressed with the gloss.
Moreover, it is easy to apply the coating to the chrome fixtures or wheels. I used it on my rims with incredible results (photos show two of the wheels). Initially, I did not think much of the product, as most of them claim to be professional. Nevertheless, this has proven true to its word. My car has a gorgeous shine, like a mirror. I had some water dripping from the wipers and it, indeed, beaded on the hood. I hope I have applied enough to last because my car looks shiny and happy.
The coating is a premium product that anybody who loves their car should have. I wholeheartedly endorse it.
It is important to prepare the surface properly before applying this ceramic coating, and ensure no direct sunlight or rain so that the coating has time to ‘cure’. Once the surface is clean, the coating is applied using the supplied cloth and mini block. It can be challenging to evenly apply the coating if the surface has contours or well-defined edges, such as the style of many cars nowadays. If you want full coverage, front pillars around a windscreen or bodywork under the front grill of a car can be challenging.
The product itself works well, with water beading as it should. I recommend against using an Auto wash as it will significantly reduce the lifespan of this coating, hand wash with a pH-neutral shampoo only. I can’t testify to the lifespan of this product.
Ceramic coatings have the reputation of being difficult to apply, as much as for the preparation before as the application of the product
Used this on one panel only of a 3 month old car, after a thorough clean (citrus spray, snow foam, hand wash) decontamination wasn’t necessary, nor was claying or machine polishing as the paintwork is in excellent condition. An older vehicle will need more attention though
This was simple to apply, in small areas, up-down, the left-right. Follow the instructions for how long to leave it and then polish off – a clean microfibre cloth. Not in the sun though and make sure that there’ll be no rain as sun will make it difficult to buff off and rain can damage the coating before it is fully cured
The beading is good, not amazing, but good enough
Time will tell if the protection is as good as claimed – 10 years seems rather ambitious to be honest, but I’ll be happy with 12 months before re-application
Good value, time will tell how effective so I’ll update this review in a few months
I’m very impressed by the shine that this product can produce, and it’s suitable for both body panels and glass. Water beads straight off coated surfaces, and the slippery surface coating also stops mud and dirt from sticking. The effect is especially helpful on the windscreen, and driving safety is improved considerably, especially in heavy driving rain, when water clears far more quickly and vision is greatly improved. I like the fact that gloves and a sponge are included too – everything you need for application.
All of this is great news, but the bad news not revealed until you read the instruction sheet is that fact that for a proper result you need to keep your car off the road and inside a clean dry garage for 2 – 3 weeks while the stuff cures. I kid you not. Tree sap, rain, insects, leaves, pollen, fingerprints and bird droppings are all things mentioned that will harm the finish whilst this stuff cures. So be prepared to clean your vehicle VERY thoroughly first, to remove all surface contaminants and old waxes so the graphene can bond, then treat it with this product, then lock it away in a garage for three weeks before coming back again.
The ten year coating life is a theoretical maximum, depending on perfect cure conditions and a 100% clean surface, free of contaminants – something none of us the real world will accomplish.
CONCLUSION
Based on my tests the results are excellent, but achieving them involves lots of preparation and a long wait. So, whilst this is a great product it’s probably best suited to owners of a garage and a spare vehicle. If that’s you, I certainly recommend this to you. If it isn’t, a standard rapid wax type product such as the Autoglym I often use is probably going to be more practical, if a little less effective. Taking practicality into consideration I’m awarding 4 stars.
As a passionate car enthusiast who takes pride in maintaining the appearance of my vehicle, I recently decided to try out the 2024 Graphene Ceramic Coating Kit to give my car the ultimate protection and shine. After putting it to the test, I must say, I am thoroughly impressed with the results.
The kit comes with everything you need to achieve professional-grade results right at home. The instructions were clear and easy to follow, allowing me to apply the coating with precision and ease. I appreciated the comprehensive nature of the kit, which included all the necessary tools and materials for a seamless application.
Once applied, the results were truly remarkable. The 10H hardness rating ensures unparalleled protection against scratches, chips, and other forms of damage, giving me peace of mind knowing that my car’s paint is safeguarded against the elements. Additionally, the high gloss finish left my car looking like it just rolled off the showroom floor, with a brilliant shine that turns heads wherever I go. Water beads up and rolls off the surface effortlessly, making it easier than ever to maintain a clean and pristine finish. Not only does this save time and effort during car washes, but it also helps to prevent water spots and stains, keeping my car looking immaculate between washes.
What’s more, the graphene ceramic formula offers long-lasting protection that far exceeds traditional wax or sealant products. With a lifespan of over 10 years, I can rest assured knowing that my car is shielded against environmental contaminants and UV damage for years to come, saving me time and money on frequent reapplications.
Overall, I couldn’t be happier with the Graphene Ceramic Coating Kit. It has exceeded my expectations in terms of ease of application, durability, and performance, making it an essential addition to my car care routine. If you’re looking to revitalise the appearance of your vehicle and provide it with unmatched protection, I highly recommend giving this coating kit a try.