Arca Swiss Quick Release Plate for AirTag, Camera Mount
Arca Swiss Quick Release Plate for AirTag, Camera Mount Adapter with 1/4″-20 Screw for Tripod Quick Release Plate, Compatible with Canon Sony Nikon Fujifilm and More Camera, AirTag Hidden in Base
From the brand
Camera Accessories
Weight: | 45.2 Grams |
Dimensions: | 9.3 x 6.2 x 1.9 centimetres |
Brand: | Kiorafoto |
Part: | CP-AT1-JWM |
Colour: | Airtag Quick Release Plate |
Dimensions: | 9.3 x 6.2 x 1.9 centimetres |
Reference: | CP-AT1-JWM |
Die Arca Swiss Platte habe ich gegen den Halter von Peak Design getauscht.
Jetzt kann ich die Kamera abstellen und sie ist gerade ausgerichtet.
Den Apple AirTag legt man in die Platte und schraubt eine Abdeckung drauf.
Danach wird die Platte gegen die Kamera geschraubt und man kann den AirTag erst dann entfernen wenn man die Platte wieder abschraubt.
Sehr gute Lsung.
Gute Qualitt, einfach montiert.Top um Einfach Gurte zwischen Kameras zu tauschen.1Gurt fr alle.Schneller Wechsel mglich.Geniale Idee mit der Schwenkse.Damit kommt man super ans Batteriefach zum Akkutausch,zumindest bei meinen 3 Nikons.Und dazu noch Arca swiss tauglich.+einem Gewinde fr Zubehr. Toooppp.Da hat Mal jemand nachgedacht.So geht sinnvolles Zubehr.
Super discret, trs bien fini, il est livr avec un jeu de vis supplmentaire, le petit tournevis qui va bien, car ce ne sont pas des vis classiques. Il y a mme un petit outils de livrer pour fixer le plateau sur don appareil.
Comme j’ai des cages avec support arca, j’ai mis ce plateau dans mon sac photo, il a la double utilit d’abriter mon airtag et d’avoir un plateau de secours si ncessaire.
Bref je recommande.
I purchased this Kiorafoto QR plate in order to track my Nikon Z camera while traveling. The QR plate is bigger than QR plates that do not have AirTags, but is still relatively compact in size given the storage space for the AirTag. More importantly, the QR plate works great with the QR baseplates on my tripods. The installation of the AirTag into the QR plate was straightforward — remove two screws for the top plate, insert the AirTag, replace the top plate and the two screws.
A 1/4″ screw is used to connect the QR plate to the camera. The screw is slotted for a standard screwdriver, coin, or other item. I would have preferred a screw with a D-ring, as no tool is then needed to attach or detach the plate from the camera.
Ideal um die Kamera an der Hfte mit einem dementsprechenden Gurt zu sichern. Ich hatte vorher eine starre se fr den Karabiner. Nun mit dieser Verbindung etwas flexibler und ich kann die se bei Nichtverwendung einfach waagrecht klappen. Das Akku Fach der der Lumix G 91 ist leider nicht mehr frei zugnglich. Aber die Platte ist sehr schnell gelockert etwas gedreht und der Akku kann gewechselt werden. Also KEIN Problem. Alles supe
No more double plating – this plate perfectly fits my K&F Concept tripod and the built-in eyelet mates perfectly with my shoulder harness. Great features and build quality, including a locking pin for the eyelet swivel.
I needed an arca compatible plate for my camera that would interface with the photographer’s cross body strap. [ https://a.co/d/d3MaQOh ] because I have multiple cameras and don’t want to have to change the plate every time I want to carry a different camera.
This not only fits the bill, it does it with style. The versatility of having an arca swiss plat that also doubles and an attacment point is immence. I only just received this but I can aloready tell it’s well made and strong enough for any camera I might wish to attach it to.
Pros:
Arca compatible
MAde of grade a material
ring is reinforced
ring can be swung out of the way for better tripod adaptability.
1/4 screw hole for added adapters or direct attachment to tripod/monopod, etc.
Cons…
Ummmm??? Pending more in the field use… None
This solved my problem of having a camera strap attachment plate and a tripod mounting plate stacked on top of each other. They would not stay tight, always moving around which caused me great concern. This product does the job of both I thing it’s awesome.