IKWOLETI Upgraded Controller Grips Cover for Meta/Oculus
IKWOLETI Upgraded Controller Grips Cover for Meta/Oculus Quest 3 Accessories, Controller Grips with Battery Opening Cover and Adjustable Knuckle Straps Protector (Not for Charging Dock)
IKWOLETI Upgraded Controller Grips for Meta/Oculus Quest 3 Accessories, with Battery Opening Cover and Adjustable Knuckle Straps Protector
Free Your Hands and Immerse Yourself in the VR Game
The controller grips for Quest 3 are ergonomically design. Premium skin-friendly silicone for better grip control, allowing for a long time to free your hands and immerse yourself in the VR game.
I decided to upgrade my controller grips to the IKWOLETI controller grips for Meta Quest 3. The batteries always drain rather quickly and it’s a hassle having to remove grips just to replace the batteries. That’s where these grips come in handy; you just lift the silicone tab covering the battery compartment, pull the available tab inside and remove and replace the battery. The grips are well made and fit well. Unlike some other grips, these are just one piece per grip, no separate straps or hooks to contend with. The grips feel nice and the straps are adjustable. Recommended.
I decided to upgrade my controller grips to the IKWOLETI controller grips for Meta Quest 3. The batteries always drain rather quickly and it’s a hassle having to remove grips just to replace the batteries. That’s where these grips come in handy; you just lift the silicone tab covering the battery compartment, pull the available tab inside and remove and replace the battery. The grips are well made and fit well. Unlike some other grips, these are just one piece per grip, no separate straps or hooks to contend with. The grips feel nice and the straps are adjustable. Recommended.
es bie
Ils sont tres bien et cochent toutes les cases
Notamment d’avoir acces au compartiment pile sans devoir les retirer, bon grip, capteurs non occlus, bien arrims et ne pouvant pas glisser…
Personnellement j’utilise un systeme sans silicone avec juste lanire et compartiment qui se clipse la place de l’original, que je prefere, mais c’est selon ses gouts (car mon systeme est plus leger/simple mais grip un peu moins bon et pas de protection silicone)
They add to the experience
These are decent quality grip covers that add just that little bit more to the experience by being able to feel I have a stronger hold of the controllers.
They appear as though they will last looking at the material and I look forward to continue using them.
Great addition to Quest 3 controllers
I’ve been lucky to try a few controller grips/covers, and these are up there with the very best. Whilst the quest controllers do have a small strap, they aren’t the grippiest of things to hold and I’m very conscious that one could slip and either be damaged, or cause damage! These covers certainly help solve that problem!
To install, take off the existing battery cover and replace with the included battery covers that have a space in them for easy access when in the case. You can then put on the covers and adjust the hand straps for some extra security when using the controllers. There were no issues with tracking when using, and they made holding the controllers a much more enjoyable experience! They are comfortable to hold, with the straps helping to keep them secure in your hand.
Also included are some joystick covers, however I did not use these.
Breathable, grip protectors for meta 3 controllers
Both of these fits easily to the meta quest 3 controllers. They have comfortable grip for long term use of gaming sessions. The are made from material that is breathable and not sweaty for palms. They help ensure the controllers have long lasting life by covering and protecting them. 4 stars due to price which is average for these products.
Handy bits of kit for your hands
These do double duty in keeping your controllers free of grime as well as protecting them (and your surroundings) from some impacts. The hand straps feel a lot more natural than having lanyards hanging round your wrists.
Nice accessory
These are a great little upgrade for the META Quest 3 controllers.
These grips make the controllers feel a lot better than not having them and provide a decent level of grip when you are using them.
The grips are easy to install and will only take you a matter of seconds.
The grip section is nice and chunky and will even allow a good firm grip for the sweatiest of hands.
The only negative thing I would say about these are the price.. Nigh on 23 March 24.
Other than that I can recommend these grips to anyone who is looking for to purchase some.
As for durability , I cant really say how long they should last, but they do feel robust enough for the job.
Excellent Quality Knuckle Strap - Comfortable with Good Tactile Feel
The Meta Quest 3 Virtual Reality Headset is a great product, but as it comes it can be let down by some of the peripherals such as the head strap, face cover, and controllers. This is where the aftermarket comes in, providing niche products to modify or enhance functionality of the headset.
This IKWOLETI Quest 3 VR grips aims to improve the Quest 3 controllers. The stock item works fine, but the strap provided hangs off your wrist, and essentially forces you to hold the controllers all the time — often in an unnatural position compared to the virtual situation. These grips aim to provide a means of attaching controllers to your hands by knuckle straps, even when all controls are released; and to provide a more natural feel.
Instructions are provided. The original battery cover needs to be removed, together with the battery. There is a choice of whether to retain the original wrist strap or not. If not required, removal can be quickly achieved by sliding out the plastic tab of the original wrist strap located at the bottom of the battery end of the controller. For Virtual Reality users indulging in strenuous gaming and hand movements, it may be useful to retain the original wrist strap for additional security.
Then it’s just a matter of slipping the provided replacement (white) battery cover in place. Ensuring the attached battery tab lies across and below the reinserted battery, and if retained the original wrist strap threaded through the hole provided. Thumb stick covers were included, and these provide a welcome soft tactile feel.
These wrist grips were advertised as improved. As is the tendency with aftermarket products the early releases have the advantage of being sought after products, but later products can offer enhancements from lessons learnt. Would agree these have an improved wrist strap, with freely moving pivot point. Also, the grip texture feels more secure. The panel face cover has holes for the controller signal points, but feel this could be a vulnerable tear area if the straps are regularly removed from the controllers.
As with similar products, these wrist grips are not compatible with the charging dock. The grips would need to be removed, and the USB pins inserted together with a dedicated battery holder. Not really practical to use with a charging dock; that said the Quest 3 controllers are efficient with battery usage and can last many weeks, so don’t really need a charging dock.
Having tried a number of Quest 3 controller wrist stap upgrades, this is up there with the best of them.
Positives:
– The tactile feel is brilliant.
– Battery compartment cover clips down firmly and is white (albeit not perfect shade match) like the original controller.
– All the sensors still work.
– The strap itself has freely moving pivot studs enabling easier and more natural access to the buttons and thumb stick.
– This controller upgrade in use felt comfortable, and stayed on the hand without needing to over tighten the straps.
An excellent quality knuckle strap at a good price. Accessed to be 5 stars.
Good but not my favourite
I’ve tried a number of grip covers for the quest 3 and these grips are good but not my favourite. They’re made of a standard silicone rubber and fit really well. The textured parts offer good grip.
My issue with these grips is the length of the velcro strap, they don’t need to be so long. I’ve found they can catch a bit on clothing.
That being said, I’d definitely still recommend them so if they are in the right price range, go for it.
Transparency Notice: I received this product for free through the Amazon Vine program. My participation in this program does not influence my reviews in any way. I strive to provide honest and unbiased feedback based solely on my personal experience with the product. I may update this review if I have any significant additional thoughts or experiences to share.
Great grips for the Oculus Quest 3!
IKWOLETI’s Upgraded Controller Grips Cover for Meta/Oculus Quest 3 Accessories, featuring a battery opening cover and adjustable knuckle straps protector, receives a perfect 5-star rating for its design and functionality. These grips are tailored to enhance the VR gaming experience, providing a secure and comfortable hold that prevents accidental drops and enhances gameplay immersion. The battery opening cover ensures easy battery replacement without needing to remove the grips, while the adjustable knuckle straps offer a customizable fit for users with different hand sizes, making long gaming sessions more comfortable and enjoyable.
The true value of the IKWOLETI Controller Grips Cover lies in its thoughtful design and attention to detail. Not only do they protect the controllers from wear and tear, but they also improve the overall user experience by ensuring that the controllers feel like an extension of the player’s hands. This level of integration is crucial for immersive VR gaming, where precision and comfort can greatly enhance performance and enjoyment. For Oculus Quest 3 users looking to upgrade their setup and safeguard their equipment, IKWOLETI’s grips offer a practical and stylish solution that significantly improves the virtual reality experience.
Thank you for reading my honest review, I hope you found it helpful! 🙂
Nice silicone covers, does the job!
I received this item via the vine programme. Here is my honest and unbiased review.
These are smply nicely made silicone covers for your VR set.
Nice silicone, fits the hand helds well.
Not really anything else to say, other than that they are a little pricey at 22.99.
They do the job!
4 Stars!
Does what they say!!
These are a lovely set of grips for the oculus Q3. They feels great and sturdy, the strap is adjustable and allows more movement with the controller without worrying about dropping it.
I think these are great value and would recommend
Good grip texture, tracks well, can use original strap as failsafe backup
This is a nice grip that doesn’t really offer anything new to the many grips out there but it covers all the basic requirements with assurance.
The most important requirement for me, once the basics are covered is the ability to have a failsafe in case the grip band fails, and that safe is basically to have the original wrist strap still attached and wrapped on the wrist. This grip thankfully, has a little cut out at the bottom for the wrist strap to feed through for that peace of mind.
The battery compartment cover is replaced with a battery hole, for the convenience of taking out the battery without removing the grip. A “lift out” strip is included to pry out the battery easily. Unfortunately, not all batteries brands will pry out with the “lift out strip”. In fact, most brands don’t and its due to the different size connector tip as shown in my pictures. That includes the popular battery brand shown in my pictures. This stress that this is no fault of the grip product, it’s just the reality of battery brands. However, with a prying tool, such as shown in my picture, all batteries can be pried out without removing the grip.
As for performance during Quest 3 gaming, the controllers worked perfectly, tracking wise and the grips provided a nice grippy feel and comfort. The Velcro band must not be tight, though, because when tight, it suppresses the movement of fingers on the controller buttons. having the ability to keep the controllers in the hand while switching to hand tracking is a great convenience.
Full marks.
Simplifies battery changes
Swapping out batteries mid-game used to interrupt the flow, but now it’s smoother, keeping immersion intact. The grip material is a game-changer against sweat during those marathon sessions, and cleaning couldn’t be simpler. Adjustability ensures a good fit for different hands, though finding the right angle takes a bit of tinkering. A minor gripe: would appreciate if it eased the installation process for those moments when time is of the essence.
Very practical, battery changes are quick, feel grippy and well made.
These grips are simple to use, feel great, and make battery changes practical, easy, and quick.
They don’t interfere with performance and if anything they enhance it. The silicone feels durable and I believe it will last well.
They are not compatible with charging docks but I love how they feel in the hand, and how useful they are.
In my opinion they’re fairly priced, well made and add convenience.
I hope you find my review helpful.
Enhanced Comfort, but Durability Questions
The IKWOLETI Upgraded Controller Grips Cover for Meta/Oculus Quest 3 brings added comfort to the gaming experience with its well-designed features. The battery opening cover and adjustable knuckle straps provide convenience and flexibility during extended gaming sessions. The black color option adds a sleek look to the overall design.
On the positive side, the grips cover is easy to install and fits the Meta/Oculus Quest 3 controllers securely. The adjustable knuckle straps offer a customizable fit, enhancing the user’s control and comfort. The addition of a battery opening cover is a thoughtful touch, allowing easy access when needed.
However, concerns arise regarding the overall durability of the product. Some users may find the material less robust than expected, and it may show signs of wear and tear over time. Additionally, it’s important to note that this cover is not compatible with charging docks.
In terms of value for money, the IKWOLETI Upgraded Controller Grips Cover is reasonably priced for its features, making it a cost-effective accessory for enhancing the gaming experience. While the durability may be a point of consideration, the added comfort and usability features contribute positively to its overall appeal. In conclusion, it offers enhanced functionality but potential buyers should be mindful of its durability limitations.
OCULUS QUEST 3 SILICONE CONTROLLER GRIPS
ANTI SLIP SILICONE QUEST 3 CONTROLLER STRAPS. ADJUSTABLE STRAPS TO SECURE YOUR CONTROLLER TO PREVENT SLIPS OR FALLING. EASY ACCESS TO THE BATTERY PANELWITH BATTERY PULL TABS FOR SWAPPING ETC. ERGONOMIC DESIGN GIVES BETTER GAMING EXPERIENCE.
Enhances gaming comfo
The grip upgrade for the Quest 3 controllers was a noticeable improvement. The open battery compartment design cleverly solves the annoyance of frequent battery swaps. The silicone material is both comfortable for long sessions and provides a secure hold, minimizing the risk of slips. Adjustability for different hand sizes is a thoughtful touch, ensuring a good fit for anyone.
Well constructed and a essential item for your controllers
Each time I get a pair of these I think surely they can’t get any better than the last lot, that’s not to say there is anything wrong with the previous grips that we have gotten, because there isn’t, far from it.
What separates these from the others is, with these you can replace the batteries without having to take the whole things off, which is very handy when you have got a little boy bugging you to change the batteries as quick as you can because he is in the middle of a game.
These feel well constructed and comfortable to hold foe long periods of time, also as I have previously said, if you have a Quest device you do need to get something like this as the afford you they extra grip so they don’t come flying out of your hand in the heat of the moment.
Would I recommend them.
Yes I would..
Handy controller grips with good access to the battery compartment.
These black controller grips with their knuckle straps and accessible battery compartment are a useful accessory for the Quest 3. Also included are a couple of black thumbstick covers and the battery replacement compartment (white coloured) covers.
The kit comes with a set of instructions, but it’s pretty straight-forward to work out how they should be used.
The grips themselves are that wibbly wobbly kind of silicone which is common for this type of accessory. The grips aren’t smooth, but feature a pattern of sorts which help to secure your grip on the controllers. The battery compartment accessibility option is a good one. Even if the controller batteries do last quite a long time. I did find putting the grips on the controllers was a trifle fiddly, but at least gave a good sung fit when sorted out.
I will say the battery cover flaps don’t close to form a tight seal and the white controller can be seen through the gap. It’s purely a cosmetic note, as it doesn’t affect the performance of the grips themselves.
The grip covers have the necessary cutouts so that the controller infrared lights/cameras are not obscured and so tracking does not appear to be impaired. There’s even a cut-out to put the controller wrist strap through.
The adjustable knuckle straps are a useful size and the Velcro style strips worked well. I don’t have a charging dock, but it’s worth noting in the description that they won’t work with a charging dock.
The thumbstick covers are useful too and felt fine in use.
In short, a good pair of grips for comfortable safe use of your controllers with good battery access. The gap on the battery compartment flap fitting is slightly distracting and not being able to use a dock is a nuisance perhaps for some.
Good quality grips cove
I ordered these for my new Quest 3 and I’m really happy with these grips. They are well designed and the cutouts are all nicely aligned. I like that the design allows access to be able to change the batteries.
So far I’ve not experienced any problems with using these and the performance of the controllers is not impaired in any way.
Highly recommended!
Makes grip a lot easie
The product was great as it was made of silicone, which made it silky and comfortable to the touch. The material also made it elastic and gave it a better grip. Additionally, the added battery access made changing and replacing the batteries a lot easier than the previous model. Overall, it is a very practical and useful addition to my Oculus controller.
Excelle
Just excellent. I have like 5 different grips for mq3 controllers and this is by far the best.
Rubber quality is exceptional comparing to the other ones. Grip and straps in perfect location.
I don’t have enormous hands but the other ones were too tight.
And the cherry on top is fact that you don’t have to take controllers out just to change battery anymore.
Great, great, great! I wish more sellers would sell quality products like this one.
Snug fit and feels grippy
Looking to level up your VR experience? Enter the IKWOLETI Upgraded Controller Grips Cover — the ultimate accessory for Meta/Oculus Quest 3 owners who demand both comfort and control.
Let’s talk comfort. These controller grips are like slipping on a pair of custom-made gloves for your hands. With their ergonomic design and adjustable knuckle straps, you’ll feel like you were born to wield your VR controllers. Say goodbye to hand fatigue and hello to endless hours of immersive gameplay.
But it’s not just about comfort — it’s about control too. The upgraded design features a battery opening cover, so you can easily swap out batteries without ever having to remove the grips. It’s the kind of thoughtful detail that makes all the difference when you’re in the heat of battle.
And let’s not forget about durability. Made from high-quality materials, these grips are built to withstand even the most intense gaming sessions. They’ll protect your controllers from bumps, scratches, and accidental drops, so you can focus on conquering virtual worlds without worrying about damaging your gear.
So, if you’re ready to take your Meta/Oculus Quest 3 experience to the next level, do yourself a favour and pick up a pair of IKWOLETI Upgraded Controller Grips Covers. Your hands — and your high scores — will thank you.
Good fit for Oculus Quest 3
Good quality material used for the grip. The silicone/rubberized construction provides a comfortable grip and It feels soft in the hand but sturdy enough. Plus unlike other covers that make battery replacement a hassle, this one allows for easy access without compromising the snug fit. It’s a small detail that makes a significant difference. It’s important to note that these grips are not designed for a charging dock.