iONZ KZ-Z – PC Gaming Case, ATX Mid Tower – Dual Chamber |
iONZ KZ-Z – PC Gaming Case, ATX Mid Tower – Dual Chamber | Front I/O USB Type-C – Black
Water cooling options
Flexible AIO positioning
- Top can Fit up to 360 mm Radiator
- Bottom can Fit up to 360 mm Radiator
- Side can Fit up to 360 mm Radiator
- Rear can Fit up to 120 mm Radiator
Style without Compromise
Option for 3 Side mounted fans
No Longer do Glass Cases have to impede Airflow. The Dual Dynamic Advanced offers the class of a Glass Fronted case whilst still allowing ample airflow from the top, bottom and sides.
| MotherBoard Supported | ATX |
| Front Panel Ports | USB 2.0 x2 and USB C x 1 |
| VGA Card Support | up to 400 mm |
| CPU Cooler Height | up to 160 mm |
| PCIE Slots | 7 |
| PSU Position | Dual Chamber Bottom |
| Panels | LHS Tempered Glass, RHS Metal with Airflow |
| Fan Support | up to 10 x 120 mm Fans |
| Case Size | 440mm x 285 mm x 400 mm |
| Watercooling Support | Top,Side and Bottom |
| Dust Filter | Top |
Toon me a bit to find this case looked threw thousands and came access this one received it and easy assemble for my mother bored and other PC parts and all in all really nice case and for 60pound couldn’t compline
Great space in the case and therefore plenty of fans etc that will be able to put in it.
Unfortunately I broke the tempered glass window very easily due to it not being on hinges but that is also due to my stupidity.
Great value for money
Ok so ive not built a pc since the dark ages where the case was a beige metal box that no one cared about. This is well built strong decent weight cable management is ok might be better with a modular psu but front of case looks neat back of mines looks like a rats nest but out of sight out of mind. Decent fans which i can control through msi mobo so also have mystic light so i dont have blinking rainbow in my face. Actually installed another 3 fans also changed direction on three fans at back so draws from here (read this from another review and agreed makes sense) plenty air movement. Gpu knock outs are actually screwed rather than snap outs. 2.5 ssd support at rear great case for the price .
Make sure you screw in any SSD’s before you put the motherboard in
needs thin rad at top or it will hit the rear fan. Had to move it to the bottom. (I have arctic freezer II 360mm)
no magnetic filter for side intake or PSU
Fans don’t make much noise but also don’t spin very fast. ARGB is nice though. Fans are daisy chained so make sure you plug them into a header than can handle the current and voltage.
Don’t get me wrong it is a nice case and decent value for money but does have some drawbacks.
Really nice case. Loads of room for airflow and everything fit perfectly. Need to talk about the GPU bracket at the rear though.
As I said everything fit perfectly, however there is not alot of room for the HDMI/DP connectors at the back. I tried to put the HDMI cable in for to connect to my monitor and it only just doesn’t fit for a proper connection. DP connectors seems to work fine though
All in all a great case, needs more work on the rear GPU bracket, Space needs to be slightly wide
Really enjoyed building with this case, straightforward and easy. Fans that come with it aren’t too bad either. I would recommend this if you’re looking for a white case like i was.
I ordered the case with 4 argb fans included. They work great, good air flow and the lights are bright and smooth. But it is important to note that they use a molex connector for power, and non standard 4 pin connectors. So they will run full speed with no control. They are however pretty quiet, helped by the included rubber mounts. They do have a 3 pin argb connector for motherboard control but I have not used this yet. There is a button on top of the case to cycle through some pre programmed colours and effects – very easy! But does not include a lights off option. If you want quick and easy they are perfect, if you want better fan control you may be better off ordering with no fans and picking up some thermalright argb fans instead.
Another thing to note is that the 3 fans mounted vertically at the back side of the case were configured as exhaust fans. It makes more sense for these to be intake so I have swapped them around. Easy enough to do.
The buttons and ports top the top of the case feel rather exposed internally – realistically this won’t cause any problems but seeing exposed circuitry can be daunting. Would have been nice to of taped them over as a minimum.
Finally, the included removable magnetic fan filters are nice. I’d reccomend leaving the top one on even with exhaust fans mounted as it does look a little ugly with it removed. The back side vents do not have removable filters, but the side panel vent holes are the same size anyway so this should not matter.
Overall very happy with the purchase considering the price, and as long as you are aware particularly of the included fans setup, I’d definitely reccomend this case.
Love the layout and accessibility of this case … the cable management is awesome and the inside of my case now looks so clean.
The only possible nit pick I can suggest is that the rear panel could be better supported if removed vertically.