Ultra Strong Magnetic AirTag Holder, Waterproof AirTag Case
Ultra Strong Magnetic AirTag Holder, Waterproof AirTag Case, Strong Neodymium Magnet, Suitable for Any Flat Steel/Iron Surface (2 Pack)
Magnetic Test
Firmly adheres to weighted iron blocks and will not come off.
IPX8 Waterproof
Rust resistance, fully tested in snow, rain, mud and other environments.
Keep track of your valuables with the Ultra Strong Magnetic AirTag Holder, a reliable and versatile solution for securing your AirTags on any flat steel or iron surface. This waterproof AirTag case features a strong neodymium magnet that ensures a secure attachment, giving you peace of mind knowing your belongings are easily locatable. Whether you're tracking keys, bags, or other items, this 4-pack holder offers flexibility and durability for all your tracking needs. Say goodbye to misplaced items and hello to organized peace of mind with these magnetic holders that keep your essentials within reach at all times.
Keep track of your valuables with the Ultra Strong Magnetic AirTag Holder, a reliable and versatile solution for securing your AirTags on any flat steel or iron surface. This waterproof AirTag case features a strong neodymium magnet that ensures a secure attachment, giving you peace of mind knowing your belongings are easily locatable. Whether you’re tracking keys, bags, or other items, this 4-pack holder offers flexibility and durability for all your tracking needs. Say goodbye to misplaced items and hello to organized peace of mind with these magnetic holders that keep your essentials within reach at all times.
I recently purchased the Ultra Strong Magnetic AirTag Holder, and I couldn't be happier with my decision. This waterproof case is incredibly sturdy, and the strong neodymium magnet holds firmly to any flat steel or iron surface. I used it to attach my AirTag to my car, and it has stayed secure through rain, car washes and rough terrain. Highly recommend this product for anyone looking for a reliable and durable AirTag holder!
I recently purchased the Ultra Strong Magnetic AirTag Holder, and I couldn’t be happier with my decision. This waterproof case is incredibly sturdy, and the strong neodymium magnet holds firmly to any flat steel or iron surface. I used it to attach my AirTag to my car, and it has stayed secure through rain, car washes and rough terrain. Highly recommend this product for anyone looking for a reliable and durable AirTag holder!
Nice vehicle tracke
The first thing I want to comment on is the fact that the magnet sticks really well – certainly an important point considering I am using it on my truck.
In this case, the waterproof element is clearly an important detail for me, and after doing a bit of an experimental dunking, and letting it sit with water. I haven’t noticed any issues with the waterproofing being an issue at all.
This holder is definitely discreet and very easy to hide, but a huge bonus to it being magnetic is that it is so easy to mount and so far I haven’t noticed any issues with it.
Very Strong Magnet. Fits Airpods Perfectly. Comes with Water Proof Cover.
I got this to be able to attach an AirTag to my bicycle. The magnetic case itself is a bit on the larger side and does not sit fully flat on any part of my bicycle. With that said, despite not being able to sit perfectly flush with any metallic surface of my bicycle frame, it still has enough magnetic strength to hold it in place. I did still put some tape over it, just to make sure that it holds much more securely within the frame of my bike so that it stays put in the event of a particularly rough drop.
It was very easy to place an airtag in; simply twist it open and insert the airtag. It comes with a nice waterproof cover, which perfectly fits the air tag and effectively acts as a barrier for any liquid from getting inside the battery compartment.
Overall, for the price, I can easily recommend this magnetic airtag holder for anyone looking to get something like this for their bicycle, scooter, car, or any vehicle.
Super strong magnet includes anti-rattle Air Tag sleeve
This does exactly what it says. It is 40mm in diameter and 13mm tall.
Sticks very strongly to iron / magnetic surfaces.
You screw it open to put airtag inside, and the screw has rubber o-ring for water sealing. It comes with a thin silicon case for the airtag which you put inside first before putting it in the holder. It prevents the airtag from rattling.
Note that due to Apple’s anti-stalking feature, if you stick this on your car, someone who steals your car would likely get a warning on their phone that there is an air-tag following them, and can make it make a sound to help them find it. You would want to find a way to silence your airtag if you want to use this to against car thief’s.
Good strong magnetic AirTag holde
This is my review of the “Ultra Strong Magnetic AirTag Holder, Waterproof AirTag Case, Strong Neodymium Magnet, Suitable for Any Flat Steel/Iron Surface (1 Pack)”
The item is sold in a sealed plain white box with a label stuck to it indicating what is inside.
I opened the box and removed the AirTag holder. I purchased a few Apple AirTags recently and since Apple AirTags don’t come with any type of holder, I was looking for different types of items to hold the AirTag.
As I wanted to put an AirTag inside my car, I thought that this item might be useful.
I put one of my AirTags into the unit and screwed it in place.
I opened up my car’s hood and attached it to a steel part of y car and it felt secure but was not stuck there permanently and could be removed somewhat easily.
This holder adds a bit of extra size to the AirTag so if the AirTag itself is close to being a tight fit, putting an AirTag into this holder will likely make it too large/thick.
It offers water resistance. While I wouldn’t trust putting something which is indicated as “waterproof” inside water for any length of time, I do like that it does offer what I would consider as water resistance since I’m not going to submerge anything electronic into water even if it is advertised to be “waterproof”.
I think that this is a good product.
Works well, water resistant fi
Airtag fits great. The silicone protector looks fit and combined with the seal on the screw cap I’m sure this would be fine for a long time in outdoor use.
The magnet is substantial but not enormous. It takes a good tug for me to pull the magnet off my fridge with one hand, but the polished surface allows it to slide very easily around.
I was going to use this on the chassis on the bottom of my car but I need to find a spot where I don’t think it would ever have the chance to slide around and where it is out of the way of debris that could strike it causing it to shift or fall off. I’m not sure the magnet is strong enough for me to trust it right there facing the road on the bottom.
The magnet is strong enough for a lot of uses, but I just wish it was maybe 30-40% thicker so that it has some overhead strength for my peace of mind.
For now I am planning on using this in my metal toolbox where it will work perfectly in the inner lid.
Upon receiving the Ultra Strong Magnetic AirTag Holder, I was eager to test its ability to securely hold my AirTags, especially as I planned to install it in my car's exterior area for tracking by Airtag. Firstly, I was impressed by its sleek and unobtrusive design, which seamlessly blended with the surfaces I attached it to. The AirTags fit snugly within the cases, providing confidence in their stability. Overall, my experience with the Ultra Strong Magnetic AirTag Holder has been positive. It's a reliable and well-designed product that met my expectations and served its purpose effectively.
Upon receiving the Ultra Strong Magnetic AirTag Holder, I was eager to test its ability to securely hold my AirTags, especially as I planned to install it in my car’s exterior area for tracking by Airtag. Firstly, I was impressed by its sleek and unobtrusive design, which seamlessly blended with the surfaces I attached it to. The AirTags fit snugly within the cases, providing confidence in their stability. Overall, my experience with the Ultra Strong Magnetic AirTag Holder has been positive. It’s a reliable and well-designed product that met my expectations and served its purpose effectively.
Product works well, super easy to pop an AirTag inside the housing, and the included silicone cover helps with some water proofing features. Magnet is super strong so I'm not worried about it falling loose from bumps or anything, perfect for stashing in your vehicle in case of any theft, or if you need to find your car in a huge parking lot, or area
Product works well, super easy to pop an AirTag inside the housing, and the included silicone cover helps with some water proofing features. Magnet is super strong so I’m not worried about it falling loose from bumps or anything, perfect for stashing in your vehicle in case of any theft, or if you need to find your car in a huge parking lot, or area
As advertised and as others have noted, the magnets on these are strong. Not crazy strong but certainly strong enough to hold a light weight AirTag. There are no o-rings so proper use of the included silicone seals is importantly to make the casing waterproof as advertised. Plastic housing is of average quality but seems sufficient for the simple task of holding the AirTag. Having a magnetic adhesion is a nice alternative to a more permanent solution in cases where you might want to move it around.
As advertised and as others have noted, the magnets on these are strong. Not crazy strong but certainly strong enough to hold a light weight AirTag. There are no o-rings so proper use of the included silicone seals is importantly to make the casing waterproof as advertised. Plastic housing is of average quality but seems sufficient for the simple task of holding the AirTag. Having a magnetic adhesion is a nice alternative to a more permanent solution in cases where you might want to move it around.
Robust holde
This holder should be robust and suitable for outdoor use. However, it lacks an O-ring on the holder thread, which might prevent it from being completely waterproof. Therefore, the silicone rubber case, which houses the AirTag, seems to play a crucial role in providing water resistance. The case fits the AirTag perfectly, but care must be taken not to install it in the wrong direction.
The magnet on the bottom of the holder is strong, and it is difficult to detach the holder vertically. However, due to its smooth surface, it can easily slide sideways. For safety, when attaching it to a large surface, it would be advisable to use double-sided tape or rubber sheet as an anti-slip measure.
IPX8 water-resista
These Neodymium Air-Tag Holders from CITYWAY are manufactured well, and when used correctly with the supplied Silicone covers, they’ll effectively become IPX8 water-resistant.
The Neodymium magnets used are strong, however the expectation – considering they are Neodymium – should have been much stronger than what they are.
The manufacturer probably wanted to have a good balance between weight vs stronger magnet since anything stronger than this would equate to a much thicker and heavier Neodymium piece.
Overall it’s okay, and serves the purpose, however, at $32 (as of this review date/time), this 4-pack is a bit pricey.