Evolution Power Tools ST2800 Circular Saw Guide Rail/Track Fits Makita, Bosch, Festool, (Clamps and Carry Bag Included), 2800 mm
|
|
|
---|---|---|
Clamps x2By simply sliding the provided clamps into the underside clamp trench and tightening, you have secured a movement-free cutting line. Ready for a perfect cut! | Connector Bars x2The ST1400 comes in two pieces. To secure the two, simply slide the provided connector bars into centre of the two tracks (underside) and tighten with the provided hex key | Carry BagTransport and maintain both 700mm pieces of track & clamps, easily with the hard-wearing Evolution carry bag that is also provided |
Universal Fit
The ST2800 track doesn’t only work when paired with Evolution circular saws. This track is universal and is compatible with most brands’ circular saws
Compatible with the R185CCSX
The ST2800 track goes perfectly with the Evolution R185CCSX. Combine the two for accuracy and reliability to get the job done faster, smoother and safer than ever before. Together they deliver straight cuts, ideal for sheet materials. Simply use the connector bars, along with the provided hex key to fit your track together. The 2x provided clamps along with the underside surface grips, ensure no movement when your saw is in a cutting motion
Compatible with the R185CCSX+
The ST2800 track goes perfectly with the Evolution R185CCSX+. Combine the two for accuracy and reliability to get the job done faster, smoother and safer than ever before. Together they deliver straight cuts, ideal for sheet materials. Simply use the connector bars, along with the provided hex key to fit your track together. The 2x provided clamps along with the underside surface grips, ensure no movement when your saw is in a cutting motion
R185CCSX
R185CCSX+
Weight: | 4.7 kg |
Size: | 2800 mm |
Dimensions: | 280 x 19 x 1.1 cm; 4.7 Kilograms |
Model: | 004-0010 |
Part: | 004-0010 |
Colour: | Black / Orange / Silver |
Pack Quantity: | 1 |
Batteries Included: | 1 Lithium ion batteries required. |
Manufacture: | Evolution |
Colour: | Black / Orange / Silver |
Quantity: | 1 |
Size: | 2800 mm |
Great addition to my tool kit, cut straight as a die with this
Found that my Saw plate was no square so had to be adjusted to ensure perfect cut following the track. Once that was lined up they were easy to use and extend
Avevo gi il binario dato con la sega, ma era troppo corto per i pannelli. Con questo ho risolto definitivamente.
I binari sono molto precisi, scorrevoli e velocissimi da fissare con i loro morsetti dedicati.
I have had the replacement delivered today and its good. One of the edges is a bit rough but its square so I can live with that and its acceptable for the price paid compared to the items I recieved yesterday. I’m glad I went for a replacement instead of a refund as I really wanted this to work. Its a big track. Its probadly worth fettling with to make life a bit smoother. Came with two clamps that I’ve not used and a bag. I have not cut the rubber strip yet but that will need doing and maybe even require a bit of work. I
will leave yesterdays review in brackets below. I have the Makita track turning up in the morning. That will be an interesting compare.
(Delivered 5 minutes ago. The track edges are appalling and NOT square at the other end. You have zero chance of joining these two rails together without a nasty train track effect. Putting back in box for replacement. If the next set is bad I’ll request a refund. You’d think a company that deals in saws could cut straight! Let’s not mention the pitted finish as per photo three)
Already had an 18v makita circular saw which I believed would work would work with this rail as the description names makita as compatible brand. However I had to instead purchase a new evolution saw to be able to use the track.
Great saw for the price though and worked perfectly with the track to rip down large bits of sheet wood. This works better and is easier work than using a table saw to rip big lengths of ply or mdf.
Produit de bonne conception. Idale pour deligner des panneaux. La prcision est au millimtres, donc bien pour le gros uvre, mais pas pour de la menuiserie pure.
Ich habe fr meine Bosch PKS 54 eine gnstige Fhrungsschiene gesucht und bin hier fndig geworden. Perfekte 2x 1,40m lange Schiene mit weiem Splitterschutz, zwei schwarzen Moosgummi Streifen, als Antirutsch und oben zwei Kunststoff Streifen als Gleitlager fr die Handkreissge. Dazu zwei durchdachte Zwingen, die beiden Feststellschrauben am Schenkel, ermglichen das Einhndige festschrauben der selbigen. Zwei Verbindungschienen, ein Imbusschlssel und eine Tasche.
Mit dem Bosch Adapter luft die PKS Spielfrei auf der Schiene. Der Splitterschutz braucht nicht “eingeschnitten” werden, da man die Maschine mit dem Adapter perfekt anpassen kann. Vielleicht macht man noch etwas “Silbergleit” auf die Fhrung fr den Adapter um ein noch besseres Ergebnis zu haben. Ich kann nur sagen Top! Und das ganze fr 92 Euro!
I needed a guide for my circular saw from Wickes. I generally like the evolution products and these rails are pretty good at giving a straight line from A to B but, my circ saw does not have a guide stop that clicks in to position. However, if I off set the guide by 33mm and then just push against the higher edge, it does a pretty good job. For a casual DIYer, it’s fine.
Bought this set of tracks for my Parkside saw. Tracks with the Parkside saw are a little effy. When connections small ones you never really get a good straight cut so I thought I get these two longs ones. Best thing about it is that you can use two connectors to make sure they are 100% straight. With newly 3m long you won’t need anything else. Comes with clamps and storage case. I’ve never had clams but it’s very hand. All under 80?? Can’t go wrong really. It will pay for it self in couple of jobs. Do your self a favour and get one of these, stop faffing around with small ones.
ben fatta molto robusta comoda da portare, spedizione ok arrivata ben protetta e anche in anticipo
Got this set because I was struggling to cut sheets of plywood that weren’t perfectly straight use it with a Makita hs76001j and the Makita 19700-5 guide rail adapter and all work perfect together , very happy now
Well made, perfect for when a straight cut or line is needed.
passt leider gar nicht zu BOSCH GKS 55 GCE – berhaupt nicht. Totale Irrefhrung.
25.07.2021 Nachtrag: habe mittlerweile heraus gefunden, dass Bosch sein System gendert hat. Meine Maschine ist von 2007 – damit noch das alte System, daher die Inkompatibilitt.
Habe mit jetzt die neue Bosch GKT 55 GCE zugelegt – eine super Maschine und die passt hervorragend zu den Schienen. Sehr przise Schnitte mglich. Auch das Zusammenklemmen auf 280cm ist easy und sauber.
Klemmzwingen funktionieren prima – Tasche dabei, alles ordentlich verrumt. Super!
Bought this for my Evolution saw, it’s easy to assemble, but dont assume it’s straight, I did with my first cut, then when I put a straight edge on the timber it wasn’t straight, I put a spirit level along the back of the track and sure enough, although the joining ends were butted up, the ends aren’t truly square, I loosened the joiners and had to have a small gap at the back to get them truly straight. The second cut was perfect. Slight gripe, but you’d assume being machined made they’d be perfect square end
These rails are an excellent price and a good product. I use them with my Triton plunge saw. the clamps that are supplied are also good.
The only disappointment is that the t-slot on the far left of the rail is inverted when compared with Triton, Makita and Festool rails. This means I cannot join these rails with others. Also I can’t use the UJK bench dog clips with these rails. I know this before I bought it.
Muy buena gua y prctica, inclusive sin las prensas es bastante estable
Been wanting these ages .. Excellent to use with Lidl’s plunge saw. Like fact comes with 2 clamps and lovely pro looking bag. Friend who is carpenter uses these and rates it ..
Fr den Preis echt unschlagbar. Zwei 70er Fhrungsschienen, die man hinten mit zwei Verbindungsstcken zusammenfgen kann. Wirkt hochwertig verarbeitet. Bosch GKS 12V-26 luft mit dem Adapter da wunderbar. Klemmen sind ebenfalls dabei, ebenso wie eine Inbusschlssel und die Tasche. Alles gut verarbeitet. Bei anderen zahlt man alleine fr die Tasche oder die Klemmen schon fast den Preis. Fr den Preis ist das Set echt TipTop.
Estoy muy satisfecho.
Muy buen material.
Entrega muy rpida en 2 das.
What can be said, other than it’s a track for a saw. Both sections connect very securely and also join to the shorter Evolution track sections. I’ve used these to reduce both width and height of oak doors and they perform perfectly. However 50 for two sections of aluminium seems steep. But this was the lowest price I could find.
would give 5if the ends were square and better joining the
Brilliant product which is so easy to use, woodworking is a hobby for me, highly recommend.
This thing is awesome for what it is.
Unfortunately my Circular saws don’t work in the track as 2 are narrower than the track allows and 1 is wider. What I’ve done for the wider 1 is fit a wider trim piece to the underside to make up the space and for the other 2 I use the back as a straight edge instead.
Its totally dead straight and easily strong enough to handle anything I throw at it (not literally)
Don’t think this is a bad investment for the money
Le ho prese dopo aver ricevuto la circolare delle Evolution, c’erano 3 spezzoni da 35 cm che erano perfetti anche per la Festool, ho preso quelle da 70 cm per avere qualcosa di pi portabile dei binari da 140 che avevo per la sega ad affondamento, devo dire che sono perfetti, non sono tagliati perfettamente a 90, ma i giunti sono precisi nei canali e tengono tutto perfettamente allineato, prima o poi li squadrer perfettamente, ma visti i risultati non che serva… Entrambi i canali sono rivolti verso il basso, come i binari Makita piuttosto che Festool.
Sono ovviamente perfetti anche per la Evolution R185ccsx, in entrambe le seghe va regolato l’eccentrico che stringe o allarga il canale di scorrimento per togliere ogni gioco. I morsetti sono ok… servono solo a tenere fermo il binario, nulla di pi, considerato che tutto il set costa poco pi di 1 solo morsetto festool, di che cosa non essere contenti? 100% raccomandato.
Sono compatibili con Festool, Makita, altre “cinesi” tipo Scheppach. Non con DeWalt. Bosch sono fatte in maniera diversa ma non ho provato la compatibilit.
Parfait, rapport qualit-prix
Juste bien ajust la scie circulaire pour le part cla
I bought these to use with my erbauer plunge saw and they work a trea
Really good piece of kit. Got it at a great price too, which makes it even more satisfying.
Die Fhrungsschienen sind kompatibel zu Festool / Makita. Allein aus diesem Grund lohnt sich der Kauf schon. Man erhlt neben den Schienen noch einen Verbinder und zwei Klemmen. Diese beiden Zubehre kosten bei den anderen Marken bereits mehr als dieses Set. Zudem kann es zuknftig mit anderen Schienen erweitert werden.
If like me you own a circular saw that is guide rail compatible and you yearn for the possibility of using it to easily and accurately cut up sheet material, this could be the answer to your prayers. As a designer crafts person I could not warrant the expense of the Bosch version and therefore researched this Evolution kit containing everything you are likely to need for a third of the price.
My main concerns related to perfect compatibility, construction quality and accuracy.
– On the first point I can confirm that if your saw claims to work with the Bosch rails (for Bosch tools it must have the letter G is at the end of the product code) it is ok.
– Construction quality is not quite up there with the big names but the aluminium extrusions are sturdy, straight and correctly sized. The two lengths of track line up accurately using the supplied joining pieces but I was surprised to find that the ends had not been cut accurately square. Although this does not prevent correct usage, this simple and unnecessary issue does little to inspire confidence and could lead to some product returns. In practice most users would be able to correct it themselves or just live with it.
-As with all saw guides of this type, on first use the plastic splinter guard needs to be trimmed away with the saw set to take a very shallow cut – particularly important as this one is made from a slightly brittle plastic. The instruction sheet fails to even mention the need to slice this off to exact size.
– The supplied bag is well put together from what seems to be tough fabric but inevitably offering limited protection to the track corners at each end.
– In conclusion, this is a very useable product at a realistic price and providing compatibility is checked for your saw, this is a worthwhile investment and recommended for all but every day professional use.
Great for cutting large panels with the work saw very accurate
Really good track. I bought this for my Triton plunge saw and it’s perfect. The track bag is one of the things that sent me to this item, it’s a good value and quality set. Can definitely recommend.
I have used this track with a Titan branded track saw and it has worked well, after a little adjustment on the saw it fits well and allows good accuracy of cuts. Joining the two sections together is easy as the tracks come with the joiners and a hex key. The package also includes some clamps which are OK but dont seem as sturdy as my Makita ones, I suspect they wont last too long. Another thing regarding the clamps is that I found the Makita clamps would not fit these tracks which is a little annoying. The carry bag included is well made and fits everything with a little room for addition accessories.
Overall I would recommend the track, as long as you adjust the saw it will fit well and cut accurately.
Unfortunately when the two tracks are slotted together on my one it does not line up square. I have tried loosening the brackets to see if it was that, but it just doesn’t budge.
Basically i will have to buy the more expensive bosch one for my bosch plunge. Was hoping to avoid doing that.
Die beiden Schienen kamen wirklich gut verpackt bei mir an. Alle Verbinder passen und die Zwingen passen gut in die Fhrung. Optimal zur Evolution Handkreissge.
Bin schon lange auf der Suche nach einer bezahlbaren Schiene fr meine Hilti WSC265KE
Bei einigen Schienen, bei der die Hilti aufgelistet ist, ist auch immer wieder die Rede von einer Bosch GKS Handkreissge, wie auch bei dieser Schiene.
Habe mir gedacht, ich bestelle diese mal und teste das. Und welche Freude, Schiene passt.
Macht einen absolut hochwertigen Eindruck, Schiene wird auch bald getestet.
Preislich absolut unschlagbar bei dieser Lnge mit Zubehr.
Excellent just a pity this was not supplied with the saw had to buy it separate since track supplied with saw was too short.
Great product!
My saw glides over the rails even at the join.
Supprisingly both of my rails were square out of the box
Pay 62, deux rails de 700mm deux serre-joints, deux barres d’assemblage et les bandes anti drapante et le sac de transport! chez festool c’est le prix du sac seulement. Petit regret avec les serre-joints qui sont bien mieux chez festool mais acheter sans hsiter. J’aurais bien aim me procurer les trois rails de 34cm livr avec la scie circulaire de la mme marque, cela aurait fait un ensemble pour toutes les situations (du moins les miennes. volution pro tool est une marque (anglaise) suivre de prs, d’ailleurs leur circulaire quivalente la TS 55 l’air plutt bien et ne cote que 140 je crois. Je n’irais pas jusqu’ regretter ma festool mais pour ceux qui ne sont pas prs dpenser les sommes leves de festool, la R185CCSX semble tre tout fait convenable ct de la TS 55…
Thought I would write this review as see a few people have had problem saying it wouldn’t fit the Erbauer plunge saw mine fit fine with a little adjust on your rail saw tension screws when you do this you will then have no movement on the rails hope this helps
La ocupo con la sierra Evolution y obviamente es 100% compatible aunque dice que funciona con otras sierras de gua no la he probado
Good Quality, great price with functional carry / protective bag makes this a product that fully meets my expectations. I’ve now tried this with two different branded track saws makita and Erbaur and had same results (great fit) so I think it is more universal. I’m not a professional but think the Length of track pieces is spot on to allow flexibility between short and long jobs like trimming a door.
first one arrived without the joining strips but pleased with the replacement which arrived 2 days later. All the parts were provided and i put it together straight away to start my DIY project which i should have started 2 days ago. Better late than never, and once my neighbour saw it he asked me to get him one as well.
Produit de trs bonne facture et super rapport qualit prix pr rapport aux grandes marques.
Compatible avec scie festool, parkside, makita et srement d’autres.
Excellent value. Clamps seem good and the rails are solid when joined. Using with Festool TS55-REBQ – feels locked in well and runs smoothly on the track.
Love the Evolution tracks ,very versatile fits a large range of tracksaws including my Titan . I have had no end of use out of these tracks ,if you have a little workshop like me it is so handy to cut up sheet goods into a more manageable size to work with in the shop.
I normally only use 1 track at a time so connecting them is not an issue for me, fits my Makita plunge saw perfectly fantastic value for the money
Sono un hobbista evoluto in possesso di una sega circolare Evolution. Avevo gia’ acquistato i binari da 2800. Soddisfatto del prodotto ho acquistato anche i binari da 1400. Ottimo rapporto qualita’/prezzo.
I love this thing, I used to use a home made wooden one, but this is so much easier and more accurate…but if u notice I marked it down for acuracy? thats because the way they show you how to use it is not spot on accurate,
Ie stick it down and use the white strip as a guide… that strip gets wrecked and is easily cut wrong if the joins are not 100% accurate, which is not really possible. Good enough for a lot of jobs though. But if you want it to be mm perfect, calculate the distance of the back of the guide to the blade, for me its 187 mm (that will always be the same). say you want to cut 500mm. Set a ruler to 313 (using a stop) then set another ruler using the first as its measure so they are both exact, clamp them to each side of the board, push the back of the guide onto them, they act as a stop, then cut. spot on accurate everytime.
Ottime!!
Prender anche quelle piu lunghe perche sono davvero utili e di ottima quali
If you have a circular saw it can be tricky to line up a long peice of wood and get a straight edge. A colleague recommended I try using tracks, not realising the tracks can be very expensive.
This product offers a significant price incentive and it certainly meets my simple home improvement needs. I recently used the tracks when laying down floor boards in my attic.
The 2 tracks are easy to put together using attachments rods and my circular saw mounted the track nice and easy. I also use trench clamps so that I can use the tracks on the floor without worrying I am going to slice into the crossbeams or carpet.
A couple of clamps are also provided to ensure the tracks stay in place when using the circular saw, and results are really impressive and using the tracks really keep wastage to a minimum.
The tracks lack some of the more useful features that the higher end tracks include, but these tracks are the ideal product for simple home improvements. I also like the storage bag which is more than adequate to keep the tracks stored away.
If you are a DIYer like me…. this kit takes the hassle out of making long cuts or ripping full sheets. Far more accurate than a table saw (unless you are willing to spend a lot of money).
I bought this to use with a tracksaw of another brand, which it does perfectly well. There are two points that are worth noting with these tracks. Firstly, and most annoyingly, they can be a little hard to get a dead square connection when you connect them up. This isn’t something unique to these tracks, as any track with a connection can be a bit fiddly to get set up well.
The slightly more annoying thing of note is that whereas makita and festool tracks have an open t slot along the top of their tracks, this track has two t slots on its underside, which makes for a very clean track and more space for clamps, but does mean that if you wish to use any track accessories like a parallel guide, then this won’t work.
In all honesty, it’s not a huge problem unless you use your tracksaw for finer joinery projects, and I’m more than happy to trade off for the price saving over the festool track which is over 300 (!)
The bag is decent – probably better for not having zips – and the clamps are…passable. Absolutely good enough considering the overall price.
As mentioned with Saw review, great package, easy to use, great storage bag, quality up there with the top quality saw/track systems, but, no where near the price. Beauty about this, is that it can be used as a Skill saw as well as track saw.
Doing long straight cuts freehand is hard to do with a handheld power saw. Of course you’d normally draw a pencil line to follow with a metre rule or something of that kind, but even so, when doing a cut down a long plank or a sheet of wood, it’s all too easy to wander off course a little and end up with a slightly wavy edge.
These guides help to get a good straight cut first time. Setup is a bit of a chore and the weakest point of the product is the clamps which seem to want to shake loose with the vibration of the saw action – you need to be pretty brutal with them to stop that from happening. However, once setup you get a lovely straight and perfect long cut.
The only problem or comment I can make against this product is having two parts 1.4m is ok unless you want 1.5m you have a lot of hangover maybe 1 part 1.4m and two parts 0.7m would be better. I also found that I had a 2mm from the ends to the centre when using both parts.
I love this track, it’s straight and couples up with my triton plunge saw perfectly.
I use this almost every day, unfortunately I did slip with my saw and damage one of the tracks so will have to order another one.
These tracks are well made and accurate. The splinter guard does a good job of helping to minimise tear-out.
Easy to put together. Only small issue would be nice the bag is comes in had a zip , but that’s trying to find a fault.
Brilliant gr8 to use when set up just take time to zet up
Useful addition to the circular saw. Great for use in doors and worktops. You have to run the saw down the track to cut/match the track’s plastic edge to the saw. I found this a bit awkward to carry out. It has to be done accurately as this will be the edge used for all future cuts.
Bought this to use with my Festool plunge saw. Works great and saw fits on the track perfectly. Watch for the track slipping off the line, it doesn’t seem to grip quite as well as the festool track but it comes with the clamps. I’ve given it 5 stars regardless of this fact as value for money and the tool does work well
I’ve had rails before from other manufactures that when connected together are not straight, I took a bit of a gamble on these but it payed off as they are dead straight when used together. The only small niggle is the splinter guard is made from hard plastic and not a rubber but the strip is cheap enough and I change it whenever is replace the blade in my saw anyway. Great value for money.
I would recommend this, arrived quickly, Bought this as a gift for my husband, he will love this
At last I got a chance to try this out on some sheets of plywood, I found it easy to set up and for the first time ever I had straight saw cuts, very pleased with it and look forward to cutting sheets rather than dreading them!
Only thing I thought could be the carry bag as it’s a bit right getting everything back in it, apart from that very good
Really cheap for a rail saw. Only problem was now matter how much I tried I could adjust it so the blade didnt cut the thin plastic strip. So now the plastic strip is cut but still works fine
Generally good for a first rail saw set up.
No zip on tge bag. Just velcro. But so far so good.
Brilliant bit of kit, used with my Makita saw.
Really good value for money having two tracks, clamps and a bag, for a fraction of the price of the Makita track.
Why pay more?
Go well with the right saw, just remember to tighten the saw to the straight edge.
Great product and value for money is exceptional. Let down again by the shoddy storage option, in this case the bag. The tracks are snug to say the least as you have a fight on your hands to get the tracks in and out of the bag which I’m sure will wear as quickly as your patience. Such a shame.
I already have an Evolution track saw and the short track that is used with it. I was impressed with the saw, but the two short lengths were not good having been cut off the extrusion by a blind man and no where near 90 degrees for fitting together. They also seemed to have a slight twist.
Thankfully these longer lengths are fine. They are flat and straight with the ends cut at exactly 90 degrees meaning they fit together perfectly.
They come with two clamps that slide in a groove that is under the track and will hold it firmly in place. They are slightly awkward to use, and I suspect that there are better options out there but almost certainly a lot more expensive.
The track is fitted with a flexible edge piece that is sacrificial. What you do is make sure that you adjust your circular saw so as to take out any backlash when fitted to the track — best or easiest done without the blade fitted — and then you run the saw down the track which, then cuts the edge to suit your blade. Because the blade has made the cut edge you know that this is a perfect edge to use lining up your markings. I haven’t checked but given that this is sacrificial it might be possible to buy replacements if you change the blade and hence the thickness of cut.
You have two lengths that can be joined using a couple of steel bars and four Allen screws. Not the most efficient but works well and is secure. It means you can cut an entire length of board in one go. Naturally a single length is enough for a cross cut of a board.
There isn’t a soft ‘sticky’ pad on the bottom of the track which some expensive track saw systems have which allows a bit of cutting on the fly without the clamps. With this system you must use some form of clamping, either the supplied clamps or your own fitted over the top.
The track and clamp comes with a carry bag that will keep things safe and secure from damage. The fit is a bit on the tight side, but it is perfectly useable.
Like all the Evolution stuff I have this is a well-priced product that is aimed at the serious home user or light industrial tradesman. For serious pro-users there are far more expensive and elaborate systems out there from high end manufacturers. For most of us however, this Evolution system is good value for money and works well.
They allright only issue is that they are not that sticky as other brand and tend to move if you don’t put enough weight o
Great value for money. A good length of track in 2 pieces, with 2 clamps for securing the track. I bought the track in conjunction with the Evolution saw R185CCSX, but the track should also work with other brands of circular saw. Will be using it to rip plywood for constructing kitchen cabinets and will update the review.
I’ve used these with the Evolution R185CCSX+ saw and also my Festool TS55.
The quality of these tracks is not too different from the festool and they are great value.
Clamps and extension / connection rods work well to provide a 2.8 metre long track for long accurate and repeatable cuts.
I wish these had been on the market sooner!
Very helpful tool for people doing lots of cutting in daily basis. Cutting tracks arrived well packed in box together with carry bag, 2 clamps and 1 Allen key. The tracks are compatible with few popular brands saw machines, not only from the same brand. Tracks are well made of strong aluminium. The edges of the tracks are a bit sharp and pointy so need to have it in mind when setting it up and work with it. The cutting tracks are good size for cutting large sheets of wood, boards with great accuracy. One track is 1.4m long but if the cutting sheet is longer we can extend the track to up to 2.8m
Clamps are easy to use, good quality, helps to hold tracks firmly into the board/ sheet we want to cut, preventing making the wrong cut. Attic floor is nearly ready, all thanks to this tracks, it speeded up our work. Recommended to everyone.
These are great tracks for using a tracksaw/plunge saw. I have a Triton saw and it works on these tracks very well. These do not have the extra captive section on the Triton track for locking the saw to the track when making angled/tilted cuts. But they can still be used with the saw and added to the Triton track – the slots line up perfectly. The splinter guard strip is really good on these as it is quite a stiff plastic, rather than a thin rubber strip I have used on other tracks. This means that once trimmed to the saw it gives a super clean finish with virtually no splintering. The clamps are OK and do the job although I do prefer quick release versions. The case is great for transporting the tracks and clamps to a jobsite. The bag is just the right size, holding the tracks securely, but not too tight that it is tricky to get them back in afterwards. All in all great value and a good quality product.
It fits the Dewalt DWS520 plunge saw perfectly and has worked perfectly cutting over 30 8×4 sheets of 3/4” ply down to 2×8 to fit through attic trap door and floor it . The only annoyance i had was that 3 of the 4 sides were a couple of MM off square so left a gap when fitted together . If i didn’t have to square them off with a Mitre saw i would have happily given 5*
The circular saw track is a very good quality, and ideal for making long, accurate cuts.
Are very easy to use,came with a lovely bag and secured wrapped!
Good value for money and I will definitely recommend it!
Very well made. Perfect that its accommodating for many types of circular saws.
To prepare for use, use alan key provided, turn aligner upside down and you will see the rails screwed in. Undo with alan key, slide to position and attach the other piece then screw rails into place on both pieces.
One of the edges is not cut very well at all and I’ve actually managed to scratch my arm on it when getting it ready, I didnt notice the edge prior to this. This did slightly effect the lining together of the two pieces, they still screw together well just needs tightening quite strongly. The saw still stayed in place never the less so it only more effected the appearance than the quality of use.
Overall, I think for the price the cutting quality needs to be checked by control more before leaving the warehouse, or maybe they could implement some filing along the edge so it’s not as sharp. Other than that everything seems so well made. Comes with everything you need provided. Comes with a handy well made bag that holds everything including a large pockets for the vices. This is all stripped in tight with velcro and has large strong handles to carry it.
I would recommend, I’d just be wary of the edges.
I am using this with my evolution saw which came with some track, ( model R185ccsx) but nothing like the length of this.
This has been easy to use and have achieved straight cuts on larger pieces of wood, namely a new door for my shed, I took the old wooden back door from my kitchen and cut a strip off to make it fit, without the track this would have been a disaster but I was able to get a clean straight cut..
Like most jobs the time is in the preparation and it did take a few minutes to set things up but once I got my saw going it was easy to achieve the straight rip.
Well worth the effort to set up for good accurate cuts
Great rail for a great price. Check you tool works with this firs
Great product easy to use but arrived with rubber strips broken.
The combined length is more than enough to tackle 8×4 sheet goods and the included clamp system ensures accuracy.
Good product. Compatible with Lidl tracksaws.
knocked off 1 star as on 1 of the tracks the rubber backing strip wasn’t fitted correctly not used yet so hopefully should still be ok.
Great rails for the money my Makita and Festool plunge saws fit nicely on them..
Perfect, exactly what needed for use with my evolution circular saw, tracks perfectly every time.
Fit the saw perfectly so I can knock down a 8X4 shee
What can I say? A long straight bit of aluminium with a guide rail.
Ever tried to cut perfectly straight lines with a circular saw, and never quite got there?
These tracks along with the Circular saw are great for all sorts of projects, and Evolution are decent – this my 3rd (different type of) power circular saw (Table and Chop are my others), and it works a treat for the DIY projects I have around the house and garden.
Work fine with my Triton plunge saw. Just as well-made as the Triton track. Only one issue is that the chip strip is too thin; it doesn’t touch the wood so doesn’t really do it’s job very well. But thicker chip strip can be purchased cheaply online so still works out to be good value.
Wow, you get a lot for your money. Good quality rails and clamps, not forgetting the carry bag.
This is clearly the way to cut in a long straight line, clamp the guide rail to your work, door etc and simply push your circular saw which sits on the rail, no more wonky lines, takes a few minutes to set up but well worth the time when you see the results, 100% straight line both vertical and horizontal, superb piece and very well made, all joiners need to invest in this valuable workshop accessory.
Vince.
Nottingham
This is an indispensible accessory for the Evolution track saw if you need to cut long boards. I used it to cut oversized kitchen worktops to width and the results were very good. The supplied clamps are a bit of a pain (the fixing screws tend to work loose) but this does not really detract from a first class tool.
Once you fiddle a bit with the set up it works well. Took my time to set it all up and now I can rely on a straight cut. Decent produc
Fantastic price for a quality Kit every bit as good as the overpriced big names spend 5 mins and add up the equivalent individual cost of each item and compare the savings
Fits my Rutland track saw perfectly Better than the original
Bought the Evolution track to extend my Lidl plunge saw and it fits the rails perfectly.
Great for cutting large sheet stock and the carry bag is very good and even has a built in pocket to keep the clamps and allen key for the connector bars.
Much cheaper than any other third party track for my saw so I’m pleased. Nearly double the price for the Makita equivalent.
I’d recommend these tracks at this price point.
Very good for the price but not 100 % straight. Used I to do a butted joint on counter top and left a small gap in middle of joint.
Great bit of kit, very well made! And nice finish, clamps are so so but do the job, and nice carrying case with unreal strong velcro!! Highly recommend this product, and cheaper than evolution tools direct! Nice one amazo
One of my best buys. Makes cutting 8×4 boards a pleasure!