Amazon Basics Dual Side-by-Side Monitor Display Mounting Arm
Amazon Basics Dual Side-by-Side Monitor Display Mounting Arm with Adjustable Height, 360-degree rotation, Adjustable Screen Tilt and Cable Organize
In The Box
– Upper Arm (2 arms)
– Lower Arm
– Base
– Grommet Bracket
– Bracket Cover (2 pieces)
– Wing Nut
– 10mm Knobs to attach monitor arms to your monitor (8 pieces)
– 10mm screw (4)
– 6mm screw
– 4mm Allen Wrench
– 2.5 mm Allen Wrench
– Cable ties (4 pieces)
– Instruction Manual
| Dimensions: | 65.02 x 17.53 x 41.15 cm; 6.12 Kilograms |
| Model: | K001395 |
| Manufacture: | Amazon Basics |
| Dimensions: | 65.02 x 17.53 x 41.15 cm; 6.12 Kilograms |
Likely not faulty, read this before returning i
I was thinking of returning it due to me thinking the joints were stuck. My recommendation is to not try to “manipulate” the joints before assembling the whole arm. Yes with force it will work, but it will make you think something is wrong when nothing is wrong.
You first need to install the arm with the monitor, even if it faces upwards. Once set up, the motions will be much smoother due to the leverage the monitor provides, then you will be able to adjust everything very easily, assuming your monitor isn’t tiny or too light.
Even if I struggled, I’m giving this a 5/5. In fact, we can’t even say that the instructions are not clear, because they don’t ask you to play with the joints before setting up the monitor.
All perfect for my 38 inches monitor LG 38WN95C-W (8.3 kg). So far no need to screw the resistance but I’m sure they will be useful in the future.
Really simple to put together and great value.
Apparently this is manufactered in the same factory as the Ergetron arms. And just rebranded amazon basic. So getting a used one half the price on warehouse was a steal. It feels really robust and strong. Easy to move but strong to stick in the excat same place.
Really happy with this arm.
Perfect for very large monitors
I’ve been using the dual arms to fit a 34″ ultrawide and a 27″ monitor side by side. So far, perfect item for my needs. Moving monitors around is significantly easier. I’m very happy with my purchase!
This is basically a Ergotron LX dual monitor stand, rebadged as Amazon Basic – I currently own two of the single version, saw this at a ridiculous price of 42 so pulled the trigger instantly. Currently have 2x 27 inch monitor hanging off it – steady as a rock, no droop, smooth tilt, up/down and side to side. This has to be bargain of the year for me.
Great but longer pole needed
Please let me know if you need a longer pole for either the single or dual monitors
solid enough for an ultrawide Acer Predator z35P scree
eally good and solid bracket that can hold properly an ultrawide monito
Build quality and ease of use were fine, as expected, however this is not suitable for holding up a 49″ curved monitor as some reviews have suggest, the main issue was not weight by the center of mass being further forward due to the curve, overnight the screen would tilt down, product returned.
Ergotron quality without the cos
If you’re looking for a VESA mount monitor arm, buy this. Its an Ergotron that’ll last you a lifetime, support any reasonable monitor, give control and moveability and look good on the desk. Worth the expenditure any day of the week.
Easy to install and use, but know its limits
Everyone talks about how freeing monitor arms can be, and there’s some truth to that. But if you’re getting the dual-arm model and have a wall behind your desk, understand that you will not be able to move your monitors very far back without them bumping into each other, especially if you have a wall or furniture next to your desk too. The “elbows” really need to be able to swing backward in order to get the full range of motion and positioning these arms offer. Maybe consider getting two single-arm stands instead of a dual-arm one if this limitation would apply to you, as being able to independently move the mounting locations will greatly increase your positioning options.
5/5 anyway because these are extremely well-made arms.
Pandemic price is over. It's time to pick one up!
While my desk isn’t exactly hurting for space, and I don’t have a need to pivot my my monitor position much, I still love being able to slide my closed laptop right under the monitor.
The build quality is very sturdy. Most monitor these days are pretty light weight. I’m using it to mount Dell 27″ and 23″ and the stand is absolutely rock solid.
I was concerned about monitor ‘sagging’ or not being level, but that is absolutely not the case.
You are also able to adjust stiffness of rotation to minimize unintended rotation through nudge.
At low $100s, these are absolute steal considering their construction quality.
Great stand
I was a bit unsure of this as it’s the Amazon basics brand, which I think does this stand a disservice. It appears this is a rebranded LG stand or made from the same or very similar spec and was previously being sold at a much higher cost. Really good stand, holds my LG ultra wide 34 with ease and is sturdy and also easy to move around. Getting it setup takes a little bit of work and the joints are stiff, but to be expected (I don’t want it to move around).
Great value, I just wish they wouldn’t slap Amazon basic logos on it (I sharpied them off).
Pretty simple to install and decent quality lag bolts that didn't strip. Had to really go for it when using a drill, but then I reached for an impact driver which made it much easier. In the photo I've mounted a 34" UltraWide that weighs about 10lbs - this thing isn't going anywhere and has full range of motion. Overall very happy.
Pretty simple to install and decent quality lag bolts that didn’t strip. Had to really go for it when using a drill, but then I reached for an impact driver which made it much easier. In the photo I’ve mounted a 34″ UltraWide that weighs about 10lbs – this thing isn’t going anywhere and has full range of motion. Overall very happy.
Great value for money
I’ve never had a monitor arm before, but I’ve been aware for a long time that my posture while sitting at my computer desk wasn’t all that great – part of that being was not being able to position my monitor quite as I would like.
Due to a recent injury to my neck I’ve decided to address a few things in my day to day life that I feel affect my back, so after researching different monitor arms I decided to go with this one after reading the good reviews and also because it was not too expensive.
I set it up yesterday. The instructions aren’t all that great, although when do you ever get good instructions these days? But once I worked it out it was pretty much a doddle. The build quality of the product is outstanding I would say, and it supports my 27 inch monitor no problem. I didn’t really need to adjust all that much. The joints are a bit stiff out of the box, which you can adjust apparently, but I didn’t bother – I just moved the monitor into place. Once I did this I just tightened the hinges with the supplied allan key so that it didn’t swing about.
There is a slot for cable management which I haven’t used so I don’t know how good or useful that is.
All in all though, delighted with this product. Wish I’d bought one years ago!
The Amazon Basics brand is generally known for knocking off popular more expensive brand name products and sold for half the cost; however, quality shows that you get what you pay for. BUT… this dual arm monitor stand is the exception: clean, sturdy, and about 1/3 the price of next equivalent dual monitor arm and similar strength and design - Ergotron LX. Unfortunately, this only comes in black. There is nothing that compares at this price point… in fact, goto YouTube for reviews and you will hear/see the same. I would buy this without thinking at even $300, but you don’t have to because it is selling at $120 currently.
The Amazon Basics brand is generally known for knocking off popular more expensive brand name products and sold for half the cost; however, quality shows that you get what you pay for. BUT this dual arm monitor stand is the exception: clean, sturdy, and about 1/3 the price of next equivalent dual monitor arm and similar strength and design – Ergotron LX. Unfortunately, this only comes in black. There is nothing that compares at this price point in fact, goto YouTube for reviews and you will hear/see the same. I would buy this without thinking at even $300, but you don’t have to because it is selling at $120 currently.
Holding up a Samsung Odyssey G7 32" for about week and half now with no problems. Instructions are a little confusing, but once you figure it out... smooth sailing hah. Would totally recommend this one. The expensive ones were in the $300+ mark & this does the exact same thing.
Holding up a Samsung Odyssey G7 32″ for about week and half now with no problems. Instructions are a little confusing, but once you figure it out… smooth sailing hah. Would totally recommend this one. The expensive ones were in the $300+ mark & this does the exact same thing.
Love everything about it once it was up. But install was hard because the bolt that holds it into the walls it was too big for the surrounding space and we could not screw it all the way in. We had to find a new bolt with a small head to get it installed properly
Love everything about it once it was up. But install was hard because the bolt that holds it into the walls it was too big for the surrounding space and we could not screw it all the way in. We had to find a new bolt with a small head to get it installed properly
Solid construction; wish it adjusted a bit highe
Overall, this is a very nice monitor arm. The build quality is very good – a couple of non-critical parts are plastic, but this doesn’t impact the overall quality.
I deduct 1/2 star for the instructions – there are at least a few typos that caused some confusion (e.g., for adjusting the part that mounts to the desk, some of the measurements are missing decimal points.) Otherwise, the instructions are picture-style, with limited wording and some steps are not as obvious as they could be. Once the steps are understood, it is easy to assemble.
I also deduct 1/2 star for the limited height adjustment. I’d really like another 5 or 6 inches of vertical adjustment.
Ultimately, I’m happy with the product. I have two 27-inch monitors mounted (one landscape, one portrait). They are easy to adjust (except for the limited vertical adjustment) and there is no sagging.
¡¡¡Excelente soporte!!!
Tena rato pensando si necesitaba un brazo de soporte, al final me decid por este de amazon y no puedo estar ms contento con la compra, si tuviera un precio ms bajo comprara uno para cada pantalla de pc que tengo.
Best Single Monitor Arm You Can Buy At This Price
This is literally an Ergotron LX with an Amazon logo on it but without the brand tax. I have used a few cheap monitor arms over the years and I can say without a shadow of a doubt that this is the only monitor mount you will ever need. I have mounted a Wacom Cintiq 22 and it holds this thing like a mother holding her child. I tried it out with my even heavier 32inch Asus monitor and it holds it up in any position exactly the same. If you are looking for an adjustable monitor arm don’t waste your time and money on cheap monitor arms and just get this one.
high quality arm
set up was easy and the quality of the arm for the price is very good. does everything as advertised. if you have any issues you either are using it wrong or you got a bad arm. (return it till you get a good one)
i have it clamped to really thin pressboard with a wooden block between the bottom of clamp and the desk and it hasn’t started destroying the desk yet, but i also don’t have the arm extended often.
Holds an Odessey G9 (with some mods)
Well, this is 40 cheaper then the Ergotron LX, but is the same item. If you take the bracket from the G9 stand and drill out the Amazon Basics bracket and replace, it easily holds the g9.
5 stars as it performs over what is should.
The Amazon Basics Monitor Arm is extremely strong, currently have a decently heavy ultrawide on one and its held up great! My only issue is the range of motion isnt the greatest, I've had to get creative to make it work with my setup
The Amazon Basics Monitor Arm is extremely strong, currently have a decently heavy ultrawide on one and its held up great! My only issue is the range of motion isnt the greatest, I’ve had to get creative to make it work with my setup
Its a great product. Sturdy, comes with everything you need, looks great when in place. Excellent range of motion.
Definitely make sure you add a length of hardwood if you are using corregated cardboard desk (like most IKEA desks). This will spread the torque and stop the risk of a heavier monitor like mine (Alienware ultrawide 34″) from collapsing forward.
The smaller allen bolts are very stiff, and the included wrench is your run of the mill cheapy. I used my own which has added grip, so was able to loosen them without issue.
Mi Ha salvato la vita
Ho preso questo braccio per il mio monitor ultrawide 49″, nonostante avessi letto recensioni secondo le quali fosse necessaria una modifica. Ho deciso di comprarlo ugualmente, perch le alternative erano decisamente pi costose.
Come si vede dalle foto, il braccio praticamente invisibile, il monitor piuttosto pesante, ma il braccio non ne risente minimamente, la cosa pi bella che non stata necessaria alcuna modifica per evitare che la testa del braccio si inclinasse per il peso.
Acquisto fantastico, per la resa e per il risparmio incredibile rispetto alle controparti.
stra consigliato.
I did extensive online research looking for a monitor stand. Am really happy with this purchase. Have a 32 inch monitor mounted on it. Great range of motion. Doesn’t wobble, relatively easy to set up (has options to mount to side of desk or through a grommet hole in the desk). I move it back and forth all day and so far (2 months in) it hasn’t loosened up or stopped holding its position. I looked at lots of other models, some of which were 2x+ the price and end of the day, not sure how much better those would be.
I did extensive online research looking for a monitor stand. Am really happy with this purchase. Have a 32 inch monitor mounted on it. Great range of motion. Doesn’t wobble, relatively easy to set up (has options to mount to side of desk or through a grommet hole in the desk). I move it back and forth all day and so far (2 months in) it hasn’t loosened up or stopped holding its position. I looked at lots of other models, some of which were 2x+ the price and end of the day, not sure how much better those would be.
Un buon prodotto tutto sommato.
Ripetendo il titolo, tutto sommato un buon prodotto, ottimo sotto il punto di vista della robustezza e dell utilizzo una volta stretto ogni grano al punto giusto.
Le uniche pecche sono la base, utilizzandolo forando la scrivania anzich in versione “pinza” che abbastanza ingombrante e il fatto che i bracci sono troppo corti per mettere 2 27″ tenendone uno frontale e l altro obliquo, il massimo che ho potuto raggiungere con un 27″ dritto stato con un 21″ in verticale in obliquo e anche li non stato il massimo era di quel poco troppo corto il braccio.
This monitor stand is a great idea that needs improvement . But, you can make it work.
Shown is two 27 inch Samsung monitors.
If the two books used to raise this stand above the desk were not used, then these monitors would be scraping the desk. Well, almost, but certainly they were too low to be useful.
My solution was to drill a hole in the desk and mount them closer and higher to me.
Now they are perfectly located and at the perfect height, with some room for adjustment.
Combined book height is 3.5 inches.
The mounting hardware for a desk mount like this comes with the stand. The books do not 🙂
I found this giant washer (4th picture) that gives it the sturdiness required at a hardware store.
I have not idea what the normal use for the washer is, but when I saw it, I knew what I would use it for.
And this is how you make these stands work.
Great Monitor Arm, but quite expensive
Overall, a great mount for heavy monitors. Quality is good and feels really secure.
Pros:
– Easy to install
– Very sturdy
– Good cable management
– Can lift heavy monitors and remain in the same position(For example, I have 2 27″ monitors each weights 17.42 lbs)
– Good documentation, (you can easily find the adjustable parts)
– Supports vesa mounts 100 and 75
– You can adjust the arms to stay in the same position, so moving your desk won’t cause issues.
Cons:
– Too expensive
Good product but can be bette
The built quality of the product is good. Black paint quality also looks nice. I have mounted it on my standing desk and it feels stable when changing height..
The product can be better, I will share the pain points:
– The product manual which contains the instructions is not good at all, both the physical book quality and the instructions. The instruction guide seems like that someone took a print from their office printer and stable the pages together.
– Adjusting the tension of the arms is a mystery. In the instructions, it just says + / -, what does those means? + means increase tension or increase mobility?
– The screws which needs to be adjusted for tension, doesn’t seems to be a proper fit in its place because when you rotate them, powdered metal is coming out, probably its scratching against something.
– The 2 caps which goes on the base of the stand pipes, are not proper fit. I really have to shove them in, I am not sure if they will come out as mentioned in the instruction book.
– While doing setup, I choose to keep my monitor fixed position (no circular rotation, example going vertical to horizontal screen), but the screen is not completely straight (0 degree angle), it is slightly tilted towards outer side.
Overall a good product, I will recommend it. I wish its installation and setup experience was better because after doing the setup, I did not feel the excitement.
Amazon rebranded ERGOTRON
I have a heavy asus 32″ rog swift monotor that weighs 9kg … this rebranded ergotron LX monitor arm is a breeze to use not a great range of motion compared to its more expensive cousin .. but for less than 80 in the UK and thats 60+ less than the OEM ..this is a bargain … had decent range of adjustment … and the table clamp can be adjusted for depth … or bolted directly through your desk with hardware supplied … good item that should last for decades and will no doubt outlive many monitors!
Excellent dual monitor arms for the money
I purchased these for my daughter who is taking media design at college. I found them easy to install and set up. I am a do it yourselfer with a shop so your experience may be different but I would think most people would have no problem installing these.
It’s been about 2 months now and they are rock solid and articulate well.
Works well with my 38" dell ultrawide
Had a hard time deciding between the Dell MSA20 monitor arm and this for my 38″ ultrawide Dell monitor. Went with this one as it offered next day delivery and it was nearly half the price of the Dell monitor arm. Can’t compare it to the Dell but this one does the job without issues. It lifts and comfortably holds the monitor roughly 7.5 inches from the desk. No issues with forward and backward movements.
Très bo
Excellent rapport qualit/prix, ce sont les mmes bras que sur le Ergotron LX Dual Side-by-Side, rebrand Amazon, moiti moins cher donc.
Trs facile monter, il faut nanmoins avoir un peu de place derrire le bureau pour que les crans ne soit pas trop proche.
Ils supportent un poids consquent, j’ai une tablette XP Pen Artist 24 Pro qui fait presque 10 kg, elle ne bouge pas en rglant la rsistance assez forte.
Great once correctly set up but instructions are pretty lacking
Spent more than a few minutes wondering why it wouldn’t support the weight of my monitor and speakers despite being within the stated supported weight range. Instructions were no help with only vague illustrations as to what the adjustments were for. Eventually figured out what need adjusting to change the vertical spring pressure and now all is well. Good product let down by poor instructions.
Super Qualität, passt aber nicht so flexibel, wie man es aus der Beschreibung lesen könnte
Die Qualitt spricht fr sich. Nichts klappert, nichts wackelt. Die Monitore hngen bombensicher da, wo man sie hinbewegt hat.
Was mir jedoch sauer aufstt ist, dass man keine 2 x 27″ Monitore mittig zusammenfhren kann. Wenn ich meine beiden Monitore zentral zusammengefahren habe, hatte ich auf meinem 80cm tiefen Schreibtisch vor den Monitoren gerade noch Platz fr meine Tastatur.
Ich habe die Halterung nun an die hintere linke Ecke des Schreibtischs verbannt. Der rechte Monitor ist nun relativ mittig auf dem Schreibtisch, und der linke passt halbwegs daneben. Nicht 100%ig wie ich es wollte, aber die Tischflche ist dafr endlich frei.
One arm to rule them all
This is a superb arm, as others have already mentioned, this is basically a rebadged Ergotron LX arm – it’s heavy, well made and super sturdy, very easy install and if you’re stuck, there are plenty of installation videos on YouTube showing what adjustments you can/need to do. I’m using it on a 32 inch monitor and it’s holding up the monitor really well. It’s locked into position and will just stay there, no droop what so ever. The arm is on the expensive end of the spectrum but considering it’s an LX arm, well worth it.
Seit 5 Jahren im Einsatz und super zufrieden!
Ja, mein Schreibtisch sieht auf einem der Fotos chaotisch aus, aber darum geht es ja nicht 😉
Die Halterungen tragen seit 5 Jahren meine Screens ohne wenn und aber.
Jede Position wird perfekt gehalten und die Montage ist simple.
Ich wrde diese Halterung sofort wieder kaufen!
The quality of the product is outstanding.
I bought this item couple of weeks ago for my 35 inch monitor and I am very pleased with the purchase. The product is predominantly metal so it feels very high quality and durable. The installation process was pretty simple although a installation manual would have made it even more simpler (it doesn’t come with a installation manual).
Excellent value, sturdy arm
This is an excellent monitor arm that allows a great range of movement. It feels robust and secure with my 27 inch monitor. I bought a “used” one on Prime Day with a 30% discount, there was no obvious defect cosmetically. One of the bolts for adjusting the tilt was very tight but as it was I did not actually need to adjust that at all.
Great stand, but good lord the assembly is a pain!
I will start this by saying that I am VERY lucky that my stand came with pretty much EXACTLY the tension amounts I wanted already set. There was only really one pivot point that I needed to adjust, and lucky me, it was the only one that was actually easy to get to!
This stand is super sturdy, and was easy to put the pieces together – but oh man, if you need to adjust tension of any of the moving parts, get ready to contort your body in horrible ways. The hex screw adjustments are at really odd angles that are almost impossible to get to with a monitor attached. And, well, you kind of need the monitor attached in order to check that it’s at the right pitch, orientation etc etc.
Get ready to bump the monitor out of the flush position you just got it in as you desperately try to find and get an angle on the next step of adjustment.
Again, though, the stand is very sturdy, and other than tightening, is exactly what I was looking for for my 27 inch monitors.
Dopo aver provato con scarsi risultati diversi bracci che a detta del produttore potevano supportare un peso massimo di 12 kg, ho deciso di provare anche questo.
Il monitor che ho montato su un samsung c49hg90 dal peso di 12kg e nonostante il peso e la grandezza, il braccio risulta robusto e stabile, ma, c’ sempre un ma.
Nonostante, la parte finale del braccio sia stata avvitata fino all’impossibile, il monitor tende ad inclinarsi, per basta inserire un piccolo pezzo di ferro o una brugola per bloccare l’inclinazione.
In conclusione, il braccio adatto per un 49 pollici?
Ni! Se non s disposti a spendere centinaia di euro e convivere con quella piccola modifica, assolutamente si. Altrimenti bisogna guardare altrove.
Works grea
I’ve had this for just over a year now, I am using it for my 27″ Acer monitor which is listed as being 8KG. The adjustability is good and it seems very sturdy. I wasn’t able to use the main mounting points on the top and bottom of this product, so I am using the 4 smaller holes near the middle and then some other screws/mounts from a different mounting product (Corefix). There isn’t any mention of using these holes in the instructions so this would be done at your own risk, but mine hasn’t fallen off the wall yet.
This is absolutely private labeled Ergotron monitor stand. I am tall and it is a little too short for me. Someone said they found a pipe at Ace Hardware to raise it up. Not possible in my experience as I tried everywhere. The pipe size is not standard and threaded. What I did do is call Ergotron and ask if they had a solution. Turns out they do. You can buy this part of $70 BASE, DESK CLAMP, 1.375 DIA. POLE, LX2 DUAL STACKED, PACKED – 200-490-026-01P this will raise the monitor up nicely and I think looks cleaner too. Take a look at the pictures. You may have to call Ergotron to order this as I don’t see it anywhere online.
Great quality produc
Bought this over the Invision one due to better height range. It’s really well made and nicely packaged too. As others have pointed out it appears to be made by Ergotron so decent quality. I tend to always avoid included wall fixings as they rarely suit my needs. Rather than the two M8 bolts included I used 4 of my own 80mm Fischer duopower plugs which held it perfectly on dot and dab walls. About to order another one!
Wish it was taller..
I found this to be easy to setup, just because I knew what I was doing prior to receiving it, the instructions were easy to follow had I needed them.
The only complaint I really have about this particular one is I wish it was taller, though I did see in the reviews where someone was able to get a piece of black pipe, threaded on both ends and replaced the tiny 2 or 3 inch piece that comes standard, I believe I will be doing this as well, just need them to be a few inches higher.
The much cheaper one my wife picked out, ended up being the one I prefer between the two, but I’ve already taken the time to install this one, and will just purchase the piece of pipe and make it how I wanted it to be to begin with.
Hold up my 27 inch monitors without any issues, took more adjustment than I thought it would, but it has kept them in place since I received it.
Fantastic A+++++
I purchased this as good condition, apart from the box having large white labels all over the product looks to be new, easy to install, that being said one of the fixing bolt/screws snapped off 3 quarters of the way in, luckily I had only drilled the one hole which is now hidden behind the bracket, my 32inch curved Samsung is perfect, it hadn’t tilted down unlike with some brackets claiming to hold 8kg weight, my monitors are just over 6kg, I purchased another bracket and recommended to anyone.
Muy resistente y completo
Arriba del precio de otros modelos pero esto s es resistente. Algo que me preocupaba al buscar estos soportes es la resistencia de los brazos y de las articulaciones. Pero creo que escog bien esto modelo. Permite instalacin de diferentes formas, viene hasta con las herramientas para instalacin y ajustes de presin en los brazos. Muy buen producto!
Well built but not the best adjustments or instructions
Found it hard to adjust and assemble, as instructions were not great – think I had to view a youtube video. I try not to adjust it too much as for my particular setup it can cause issues but still resolvable. Overall well built and study. Will see how it fares when I get an ultrawide monitor.
One of my big concerns on this mount was would it hold up the weight of the monitor (Iiyama GB3466WQSU-B1). My monitor has a listed weight of 10.9KG and it holds it beautifully. It’s important to note there are tightening bolts which increase/decrease the weight resistance, so make sure if you’re having issues with the screen drifting from the position you place it, that those bolts are tight enough.
Sujeción perfecta para monitores de 27"
Nada que envidiar a los ergotron que son muchisimos ms caros. El acabado es bonito y robusto se ve de buena calidad. Lo he usado con dos monitores Dell 27″ y ahora con dos LG Ultrafine que son bastante pesados, y aguantan sin problema.
Si son muy pesados recomiendo usar debajo de la mesa un taquito de madera que haga ms agarre y, segn el grosor de la mesa, no la acabe doblando
Space behind the desk is importa
If you’re going for a full range of motion with these, you need ample space behind your desk. I just measured and they need to be 25cm from the wall behind. Mine was a pain to set up since they were so stiff, but I realised that its because they support the weight of the monitor. Once you eventually get them hooked up and use the allen keys to adjust the resistance they’re good. I have 2 different monitors and use them off center as I primarily use monitor one to play games, so I bought 2 of the indivual arms rather than the double. They are expensive I feel, but the build quality is quite good and I would say worth the money.
Good mount.. wel built.. would recommend
Good monitor stand with good range of motions. Metal construction is solid and it took me 10 minutes to mount it on the wall and now I have my desk back.
If you have limited space or you wod lime the monitor to go close to the wall.. I would recommend mounting the bracket at an offset as the swivelling mechanism will not go straight back so the monitor is skewed from the centre of the desk if pushed fully back (in the case where ypou mount it to wall in the centre of the table.)
Very solid - no 'droop' :-)
Love these monitor arms – Ive got a single and a double holding 3 Samsung 28″ screens. The desk clamps are very well constructed and the monitors stay where you want them.
Gut, aber schwergängiger Kopf
Habe den Arm das zweite Mal gekauft, da er seit einem knappen Jahr sehr gut bei meiner Tochter funktioniert.
Diesmal hatte ich aber ein Problem beim Aufbau. Der Gelenkkopf war so schwergngig, das er sich nur mit extremen Krafteinsatz lsen lie. Habe dies erst beim dritten Umtausch gemerkt, nachdem mir die Hotline auch nicht wirklich helfen konnte.
Also guter Arm, aber am Anfang etwas schwergngig, deshalb 4 von 5 Sternen.
I’ll let other people do the normal reviews and just say the things I want to say.
I bought this for four reasons:
1) to improve my posture as I realised the monitor stand I had was too low even at its highest and was making me slump into my chair to be eye-level with the screen. Now with this thing, I’m being encouraged to sit up straight in my chair, which is good.
2) to be able to rotate the entire monitor easily. This works brilliantly. The old monitor stand could sort-of do this but would get the cables all entangled. With this, it’s much easier to adjust any way I want.
3) because if I own this, I don’t need to limit myself to buying a new monitor with an adjustable stand as this takes care of all of that, which frees me to focus on buying just the best monitor.
4) I like bringing the monitor super-close to my eyes when I’m playing computer games. Now I can do this very easily whereas before I had to physically lift the entire monitor to bring it closer and I could only bring it so close without knocking the keyboard off my desk. Now I can give myself migraines by putting my face right into the screen!
The important thing I want to say about this product that I have not seen mentioned in recent reviews is that at the beginning, everything is very stiff, to the point where I thought it had to be broken. There seemed to be no adjustability or flexibility at all. It was a comment on YouTube about how “it is really hard to move right out of the box” that gave me hope. I carried on wrestling with it, giving up and then coming back to it. Eventually I did manage to get it loosened up and working. The instruction manual is not very good but you work it out yourself eventually.
There are only two screws you can adjust with the provided large Allen key. Turn those as much anti-clockwise as you can to loosen things up and then retighten a bit when everything is set up how you like it. Someone else on YouTube complained that the monitor attachment plate is “stuck facing the ceiling” and this was exactly what had me puzzled until I found that by using brute force, I was able to bring it down into its rightful position.
A good purchase then. It seems a bit expensive but I have to hope that means quality components and an arm that won’t just break off in the middle of the night.
Great stand
Very well made, solid piece of kit that is built to last, with nice cable management to give a clean desk.
I had problem with one arm – tension could not be adjusted – but Amazon quickly sent me a replacment
Points to note:
1) I had hoped to mount this near to a wall – but it really limits placment of screens.
Luckily I have a window along wall, so was able to relocate on my desk, in order to get full range of movement. I would say min 20-30 cm of freespace at back to use effectively and align screens as required ( I have 2 dell 25″ screens).
2) Also, I was worried as my desk has metal support beam underneath giving a depth of 75mm about whether G-clamp would fit and I didnt want to be drillling cutouts. Tip I flipped bottom of clamp upside down and it works fine!!
This is basically ergotron equivalent for 70 to 80 less which was my other option.
High recommended
Sturdy, good range of motion and excellent value!
This is my first monitor arm so take this with a grain of salt. I was a little wary of spending $130 on a monitor when maybe a $30 arm may have sufficed for my needs. I’ve been using it for 2 weeks now and I feel like I’ve gotten my money’s worth for my purchase.
I use it as a monitor for my desk and when I turn it around it becomes a screen for couch viewing, so I move it back and forth quite a bit. I secured the monitor by drilling a hole through my desk and I have no issues with stability and my monitor feels perfectly safe.
A couple of things… 1) Have a Hex Key set handy. Not all the bolts on the arm will fit the hex keys provided. 2) The length of the clamp to secure the base can only accommodate a table thickness of 2.5 in or less. Anything more than that won’t fit.
Overall, it’s been great for me and while cheaper arms may have worked just as well, my experience the last two weeks has been worth the $130 price tag.
Perfecto
Tengo dos monitores y uno sin regulacin de altura. Quera poder ajustar la posicin (alejar, acercar, poner en vertical) y tener ms limpio el escritorio.
Perfectos, estuve mirando distintas marcas, algunas superaras, pero me decid por este modelo en parte por las opiniones positivas. Y tenan razn, aguantan la posicin sin problemas, son fciles de ajustar y los cables quedan recogidos.
Buena compra.
Veel reviewers geven al aan dat deze arm op de amazon logo’s en stickers als 2 druppels water lijkt op een arm gemaakt door Ergotron. Hun produceren zeer goede professionele armen en zijn doorgaans bijna 2x zo duur. Het vermoeden is dan ook dat Amazon deze armen laat maken door Ergotron.
Heb net de mijne ontvangen en na het even bestuderen van wat gegevens en het product ben ik er absoluut zeker van dat deze armen door Ergotron gemaakt worden. Sterker nog het is gewoon een gangbaar Ergotron product op kleine subtiele verschillen na. De Amazon variant heeft zwarte schroeven ipv. zilveren en op de locatie waar normaal logo’s van Ergotron staan staan nu Amazon basics logos. Ook op de doos staat ERGGO2220A wat ook wel een signaal is. We kunnen nu echt niet meer van toeval spreken. Dit is gewoon een Ergotron voor 50% korting :D.
Ook heb ik een foto bijgevoegd voor de schroef waarmee je de veer van de arm voor het gewicht van de monitoren kan compenseren. Heb er zelf 2x een Dell 30″ a 10.5kg per stuk aan hangen.
I wish I had got these years ago, I could have saved my table lots of wear and tear and saved tons of space! This arm is super sturdy (I also have the 2-way version for 2 screens) and allows the screens to be flipped around quickly to people on the other side sitting on the couch. Everything is easily and quickly adjustable. I would buy these again immediately and recommend them to all my friends. The only issue I had was under the table the mounting kit didn't fit so I had to wedge some cardboard between to make it fit securely (see photos).
I wish I had got these years ago, I could have saved my table lots of wear and tear and saved tons of space! This arm is super sturdy (I also have the 2-way version for 2 screens) and allows the screens to be flipped around quickly to people on the other side sitting on the couch. Everything is easily and quickly adjustable. I would buy these again immediately and recommend them to all my friends. The only issue I had was under the table the mounting kit didn’t fit so I had to wedge some cardboard between to make it fit securely (see photos).
Ok:
Amazing arm for **most** monitors.
The arm is sturdy even for an Odessy G9.
The only problem is the tilt mechanism. This needs to be stronger. Even at full tension this slightly leans down over time. I have fixed it by putting the exact size Alan key between the two stopping points on the tilt mechanism and it gets me the perfect angle.
Holds an Acer x34 predator no problem. Had to tighten the tension screw, but haven't had to do it again since the first setup months ago. Looks nice, was easy to setup, although I just ended up drilling a hole in my desk to punch the mounting bolt through. Not a failure of the arm, I just have a weirdly deep desk. I'd put it on par with any name brand arms for sure
Holds an Acer x34 predator no problem. Had to tighten the tension screw, but haven’t had to do it again since the first setup months ago. Looks nice, was easy to setup, although I just ended up drilling a hole in my desk to punch the mounting bolt through. Not a failure of the arm, I just have a weirdly deep desk. I’d put it on par with any name brand arms for sure
Works with my Ikea SKARSTA and Ultra-wide Monito
I have been using AmazonBasics Premium Single Monitor arm with the LG 34WL500-B 34 Inch UltraWide monitor. The monitor’s specs are listed as 32.50 in x 14.56 in, and 13.0 lbs. After 3 weeks of use I have not seen any issues and am very happy with this purchase.
There is a tool included to adjust the amount of pressure needed to move several of the joints in the arm (just by turning a screw). I adjusted the vertical movement, as at first the large monitor caused the arm to sink down. After adjusting the tension it didn’t move at all unless I moved it intentionally.
I attached this to the Ikea SKARSTA tabletop. I was concerned the weight might be too much for this tabletop (it is not solid wood), but I have seen no issues at all.
I will mention the following because I’ve read on Reddit that other people had the same concern I had. Since I received this arm before having the monitor, it felt like the plate that mounts to the monitor was stuck and unable to move down so that the monitor would face the ceiling. I could not move it with my hand without the monitor attached. But it is not actually broken. Once a monitor is mounted, there is no issue moving it as expected.
Instructions are bad but I finally got it to work
So 1st off I spent a good 4 ish hours trying to set two of these things up for my HP 25es & MSI Optix G32. I will tell you that the tension bolts in this thing are so tight that it wore me out trying to get it to work properly. But after going on YouTube and reading others reviews about how tough they are to move I finally got it to turn and twist to the way I need it to be. It feels super sturdy and that is exactly what I needed especially for the MSI monitor as it come in at about 20lbs. No other mount any where I have seen can hold its weight so I do give props to Amazon Basics for making this as it will be a lifesaver for me as I work from Home.
Only suggestion is better instructions and maybe a warning that these tension screws will be tight as hell on the thing so a little man power will go a long way.
Expensive but grea
Great packaging, easy assembly, can hold quite heavy monitors. Adjusting the tilt was quite stiff but guess that is a good thing for keeping them in place. Easy re-adjustments of the arms and basic cable management as well.
Really solid & easy to assemble but consider depth and placement of your desk before buying
Very happy with this, but just a heads up if you have a shallow desk that’s placed up against a wall. It’s partially a matter of personal preference, but with 2 x 27″ monitors in a “V” configuration, the wall blocks the arms from retreating too far, so you may find larger screens are too close for optimal viewing.
I have a 30″ deep desk so it’s not a show stopper, but I would not want the screens any closer.
In the attached photo with the desk is right up against the wall, you’d need 16″ clearance to accommodate the arms (more still if you used the clamping mechanism on the lip of the desk). That would not leave you much working area if you had a shallow desk without a keyboard tray.
Again, a matter of preference, but something you may want to consider.
Great range of motion in all directions otherwise, and really sturdy. The mounting bracket allowed me to screw right into the back of the desk, not official but the best option. Great product.
Solid arm, difficult assembly.
Works well for LG UltraFine 5k (weighs about 19lbs) once assembled correctly. Adjustments are easy (after you get through the initial tightness in some joints).
Cons:
– A few joints were very tight initially (the one that controls the tilt in particular). I had to apply a lot of force to loosen them up (these are just tight moving parts in the joint, not the screws that control the tension as some other reviews state). They stayed smooth after loosening.
– Difficult to keep the screen perfectly level as you can’t completely lock the angle of rotation. The “locked” position, has a leeway of a few degrees (for leveling). The display always rotates a bit when you adjust tilt or height. The leeway is small, so it’s not noticeable unless you you compare it to other objects on your desk that are perfectly level.
– It’s easier to adjust tension screws if you take the display off the arm. Not a big issue as you rarely need to adjust tension after initial adjustment is complete.
– Instructions are poor.
Holds 32" Ultrawide and sturdy constructio
Used this for my 32″ Ultrawide Dell S3220DGF and a 24″ Dell U2412M. 32″ monitor needed some tightening at the end of the monitor arm, be sure to notice the screw recessed there. After that all adjustments were simple and
I’m very satisfied with the ergonomics.
Very sturdy contruction and clean looks, would recommend!
This really is a rebranded Ergotron model, as there is even a label on the box from the original shipping from Ergotron DE, Inc. to Amazon.
I use this monitor stand to support a 34" LG Ultrawide monitor without any problems. Monitor arm is of good quality and looks a lot like similar products from Ergotron but at a lower price. The package includes hardware to allow either clamping of the mount of the edge of a desk or mounting through a small hole in the desktop, which is very handy. I was initially unsure about whether a monitor arm was worth the extra cost, but I am so glad that I got one. The convenience of being able to easily adjust the position of the monitor to suit one's seating position is a game changer in my home office setup for sure!
I use this monitor stand to support a 34″ LG Ultrawide monitor without any problems. Monitor arm is of good quality and looks a lot like similar products from Ergotron but at a lower price. The package includes hardware to allow either clamping of the mount of the edge of a desk or mounting through a small hole in the desktop, which is very handy. I was initially unsure about whether a monitor arm was worth the extra cost, but I am so glad that I got one. The convenience of being able to easily adjust the position of the monitor to suit one’s seating position is a game changer in my home office setup for sure!
Good, solid produc
Sturdy and quality feeling product. Works well with my two (24″ and 25″) monitors.
I keep the stand out of the way on the left side of my desk with the larger monitor directly in front of me in the centre of the desk and the smaller one to my left. I have seen other reviewers comment on how it doesn’t seem designed for monitors over 24″ but I’ve had no issues, although I do have one monitor oriented vertically. If I was using two >27″ monitors horizontally I can see that possibly being a problem, but I’ve not tested this.
Nice and sleek looking, solid construction.
Bought these to replace my older Ergotron monitor arms, they really do appear to be repurposed or rebranded Ergotron arms, the design is practically identical. They look amazing and like Ergotron’s appear very professional and I find them to be the most well made, best looking monitor arms on the market, but that’s subjective of course.
They came well packaged and was mostly easy to assemble, the plastic caps you can use to top off the dual poles on the desk were a bit rough cut and tricky to insert/click into those tubes, but it all worked out in the end.
If the build quality is the same as my old Ergotron, they’ll easily last me a decade or so. Can definitely recommend.
Arm 5, Paper Instructions 1
One point off for the written instructions that came with the product. Not nearly Amazon’s quality … come on guys, we can do better than this!
The product itself is solid value. Once set up, a five.
The first video on Amazon is essential. And some helpful visuals on YouTube. The first of two arms was an adventure: why is the monitor plate so stiff, other joints too, why are the two different clamp options mixed, the semi-hidden screw, and a few things taking time to figure out. Took almost two hours. Once I knew what was happening the second arm went from opening box and taking the Dell U2715H (10lb) from its stand-alone place, to assembled, clamped, tension-adjusted, and back to functioning in under 25m.
Clamped to the desk sides as wing monitors. Can rotate to give options when working with some documents.
Besides the instructions, I would add a suggestion for improvement: as matt of a finish as feasible on the whole assembly… it’s pretty good, but less reflection would be even better.
Impeccable
C’est un Ergotron LX rebadg Amazon Basics donc aussi bien et moins cher.
Notice claire et complte sur les diffrentes options de montage, facile installer.
Tout aussi facile utiliser avec 2 Iiyama 27″ de 7kg+ chacun.
Les 2 crans en mode paysage restent bien aligns, et rgulirement j’en tourne un en mode portrait pour la bureautique, l’autre 90 du bureau pour voir une vido depuis un canap, a fonctionne nickel et se repositionne aussi aisment.
Great buy. Saves desk space.
Bought this to set up my home office and it has freed up a lot desk space and I can finally set my monitors to the right height.
I now have room on my desk to access all my other devices easily.
Overall assembly isn’t too difficult. Just make sure to tighten the tension enough to support older, heavier monitors to prevent sagging.
Good, but expensive
I don’t know why this is almost 100. It’s good, but that price… I have some 20 wall mounts that are almost as good.
They should include some proper screws and plugs with this for the price too…
Due to the above, I used some spare screws with 10mm hex heads, but the 10mm socket fouls on the wall mount as you screw it tight so that was fun… not.
Buy some philips screws if you’re purchasing this!
J’ai achet ce bras pour un cran 32 pouces qui pse autour de 10 kg.
J’ai beaucoup cherch, j’ai vu beaucoup de modles bien plus chers qui ne portaient que 7 ou 8 kg.
(l’outil de recherche d’amazon est assez dficient de ce point de vue l, le poids support tant quand mme le critre pricipal)
C’est du solide, “lourd”, et a donne vraiment confiance. J’ai vraiment confiance pour l’avenir.
Cot esthtique, c’est trs honnte.
A mon sens, il faut privilgier le montage avec un trou dans la table, c’est beaucoup plus scurisant. La fixation avec une pince est srieuse, c’est du “lourd, mais il faut vraiment qu’elle prenne profond. Pour moi, j’ai trouv que c’tait insuffisant pour le poids de l’cran.
Pour le montage, c’est facile. La notice n’est pas hyper claire, mais bon, ce n’est pas non plus une mcanique complique.
Une fois install, c’est un rgal, je place mon cran comme je le souhaite, c’est souple, a se rgle trs bien.
More clear instructions on adjusting tension would be good.
After initial installation my monitors were sinking to the desk. Took a little while to figure out how to change the tension on the springs. The screws to tighten it weren’t obvious at all! But all good once I found them. Great buy.
Was mir am Besten gefiel: Die Halterung lsst sich auch durch die Tischplatte montieren und nicht wie meist NUR seitlich anklemmen.
Zudem habe ich 2x 34″ 21:9 Monitore, also frchtete ich, dass die Arme nicht weit genug auseinander zeigen um sie ordentlich nebeneinander zu haben – aber wie ausgemessen geht sich das aus mit ca. 2-3 cm Spalt – rumdrehen kann man halt schlecht, aber es langt voll.
Einzig, recht hoch kommen die Bildschirme nicht – vorallem in diesem Formfaktor.
Everything I expected
This is just an initial impression and it might change in the future, but so far It gave me a great impression.
So here’s what I didn’t expect (might be standard and I just don’t know):
– You can use the full arm with a joint or just 1 part, for shorter version (and small desks)
– Spring tension is adjustable for heavier monitors or easier adjustments (lighter monitors are somewhat difficult to push down by default)
– It appears to support multiple ways to attach this thing to your desk. Clamp, drill through
– Rotation (to set monitor to portrait or landscape) is supported, but can be disabled
– It has a cable routing channel, but it’s tiny
– It’s designed to be easy to disassemble, despite it having snap-in covers
Now a few minor drawbacks:
– When rotation is disabled it can still rotate by about 20 each way. It’s a small thing, but It’s somewhat bothersome adjusting for that tiny rotation each time you reach over monitor and rotate it slightly.
– Cable routing channel only exists on one (optional) portion of the arms , so realistically, you still have to do something about the main part.
– Cable routing channel is tiny. It will only hold 2 medium cables. If you have a monitor with USB extensions and multiple inputs you’ll still have a good portion of cables hanging outside. A cable such as Corsair RGB keyboard has will not fit at all.
– Instructions are mostly unnecessary, but when I did need them, It was somewhat difficult finding what I was looking for due to the visual clutter and multi-language text in 1 page.
Overall, I am really happy with the purchase!
Product is a beast! Very well made, no racking of the my monitors. I am using this for dual 27″ Samsung displays. No issue with support or “sag” when moving or extending arms. I have had other single pole units for dual arms, which sagged in spite of tightening all connections. I read all the reviews on this product carefully, since it is so expensive. Some commented on Amazon branding, no issue here logos are very small. and cannot see once monitors are installed. I would take away 1/2 star as the upper arms hide the cords with zip ties. They do not have a plastic cover to hide. Cables to tuck into arm, so you cannot see. But for the price, a simple cover would keep unit clean. Lastly note where your VESA connections are on your monitors. My monitors have connections at top. So I cannot rotate 90 degrees. I knew this, never needed to spin, so no issue for me. But I want to point this out as a consideration. Any product/arms that allow for rotation will have this issue if your VESA points
are not centered. Instructions were very clear and had my whole setup ready to go in less than 30 minutes. I am happy with the purchase.
Very strong and sturdy with great maneuverability!
This product is really fantastic considering the price. I’ve seen other arm stands on the internet that don’t look anything near as sturdy as this one.
I have an MSI Optix MAG341CQ which is a large and heavy 34inch ultrawidescreen monitor. The stands holds it effortlessly and allows for a full range of motion when moving it around. I keep my monitor in a neutral position when working at my desk, but then I like to move it around for watching movies or working out etc and the stand allows for this with complete ease. I will note for anyone with an MSI monitor, they don’t come with the required VESA bracket for this stand so you’ll have to buy that seperately. Most other monitors come with them, just MSI seem not to.
Installation was a little tricky due to the size of my monitor, but I got there eventually and once it’s on, you shouldn’t have to adjust it much apart from tightening a few of the screws to keep it secure. Some of the tightening points are a little fiddly to get to.
Overall, great product, built well and does the job perfectly. I can’t imagine going back to a conventional monitor stand after using this.
so far... it's still standing.
Bought this for my OMEN X35 which is a 35inch ultrawide monitor, i will eventually add a second smaller monitor to the side so i got the duel arm stand.
So far it seems to hold it no problem, moving the screen is easy and it makes my desk look nicer. no arguments here its a good stand.
I am a bit worried about my desk underneath where it holds onto, seems like alot of pressure to put on such a small space.
Contrary to false and unfounded statements by other reviewers whom affirm that this arm will not properly support larger 27QHD (20 lbs) drawing tablets ... despite their higher weight rating of 25lbs. The arm WILL indeed support larger monitors comfortably ... but it must be properly adjusted to do so ... There are two adjustable tension screws which regulate the stiffness of the arm ... My 27QHD (20 lbs) drawing tablet sits fine and does not droop ... My monitor is affixed to the side of my workstation desk, rather than being affixed to the back or far edge of the desk, which would barely allow it to reach the front of the desk ... Anchoring it to the left side actually allows for far more mobility and varied drawing positions ( for a right handed user) ... All of these monitor arms wobble a little on larger heavier monitors ... It's not an issue at all as they remain stable once positioned ... I adjusted mine to be a little stiff to move around ... Others might prefer a slightly looser adjustment for easier manipulation ... This is a good quality product which is very effective for larger monitors ... A larger VESA attachment plate is necessary for the 27QHD drawing tablet ... as the supplied plate is too small to fit ... I would recommend this product which in my opinion delivers a good value for the price
Contrary to false and unfounded statements by other reviewers whom affirm that this arm will not properly support larger 27QHD (20 lbs) drawing tablets … despite their higher weight rating of 25lbs. The arm WILL indeed support larger monitors comfortably … but it must be properly adjusted to do so … There are two adjustable tension screws which regulate the stiffness of the arm … My 27QHD (20 lbs) drawing tablet sits fine and does not droop … My monitor is affixed to the side of my workstation desk, rather than being affixed to the back or far edge of the desk, which would barely allow it to reach the front of the desk … Anchoring it to the left side actually allows for far more mobility and varied drawing positions ( for a right handed user) … All of these monitor arms wobble a little on larger heavier monitors … It’s not an issue at all as they remain stable once positioned … I adjusted mine to be a little stiff to move around … Others might prefer a slightly looser adjustment for easier manipulation … This is a good quality product which is very effective for larger monitors … A larger VESA attachment plate is necessary for the 27QHD drawing tablet … as the supplied plate is too small to fit … I would recommend this product which in my opinion delivers a good value for the price
Sturdy monitor arm that saves a lot of space.
I bought this dual mounting arm in order to support my 2 monitors and save space on my desk. My main monitor is an MSI MPG27CQ, and secondary is ASUS VP228HE. The main issue was that the included stand for the MSI monitor was far too large to reasonably fit on my desk and most other monitor arms weren’t able to support its weight and allow independent movement of both monitors.
I was initially worried that the weight difference between the monitors will be an issue and I might not be able to adjust it properly but I soon found that was not an issue.
The monitor arm is very well made, adjustable and uses a standard hex screw for most adjustments, meaning that even if I lose the included tools, replacements are easy to find.
I also love the cable management options which allow me to nicely hide most of my cables. My only issue is that my cables weren’t long enough to fully support use of all the cable management options; however that’s an issue with my set up not with the monitor arm.
I am very glad I’ve chose this mounting arm. It does the job perfectly and I have a lot of space on my desk. Excellent product!
I use this mount to mount my 32" Dell Ultrasharp Monitor. The monitor weighs 13lbs so it is not heavy at all. The arm is extended out far. As long as it is mounted in a stud, this arm holds well and can be adjusted very easily. The quality is god and it has good wire feeding through the bottom of the arm. As always, impressed with AmazonBasics!
I use this mount to mount my 32″ Dell Ultrasharp Monitor. The monitor weighs 13lbs so it is not heavy at all. The arm is extended out far. As long as it is mounted in a stud, this arm holds well and can be adjusted very easily. The quality is god and it has good wire feeding through the bottom of the arm. As always, impressed with AmazonBasics!
I was expecting to be disappointed for a few reasons. I ordered a "used" unit, although in like new condition. I used to be an "open box" deal kinda guy but have since decided that it's usually not worth it and prefer to pay a few extra dollars to get new. Based on the reviews I read, especially those referencing the "bad" screw - I anticipated there would be a selection of returned units. Since this arm was a bit on the expensive side I figured I needed to justify my purchase by saving a few bucks buying used. As soon as I ordered a "used" unit I began my buyers remorse dance but ended up biting the bullet and let it go. When my package arrived it was in decent shape, I opened it and noted that there were two bags that had been opened containing some hardware. That was the extent of being "used". I inventoried the parts, everything was accounted for. I checked for mars, dents, scratches, mangled screws, etc.. I was as advertised, like new, I could not tell the difference. The unit and parts were well packed and all documentation was included. First hurdle and a great relief! Now for the infamous "bad" screw that seems to have haunted a few. I read a number of reviews and noted that the "bad" screw issue was addressed in a few of these an this is noted clearly in the instructions, that there is a screw behind the monitor mounting plates - someone included photos of this. This screw needs to be loosened or tightened for these arms to work well, and finally, tightened at the end to be sure the arms hold their position and can be adjusted without them slowly falling/drooping. I had to make a number of adjustments but expected this. These arms are well made, solid and offer a ton a versatility. I wound up drilling a hole in my desk for this mount since I was worried about the distance from my desk to the wall. The back edge of the base for this mount sits about 4"" forward from the back of my desk and is slightly (5" - 6") to the left of center - this works well for me as my desk is fairly deep (32") and long (36"). I have no regrets purchasing this dual mounting arm. It is solid, clearly of good quality and adjusts easily - very smooth. I would not have been disappointed had I paid full price for this item, it is worth it - a good value. With that said, I would not hesitate to buy a used Amazon item again based on this experience, I saved quite a few $$ doing so.
I was expecting to be disappointed for a few reasons. I ordered a “used” unit, although in like new condition. I used to be an “open box” deal kinda guy but have since decided that it’s usually not worth it and prefer to pay a few extra dollars to get new. Based on the reviews I read, especially those referencing the “bad” screw – I anticipated there would be a selection of returned units. Since this arm was a bit on the expensive side I figured I needed to justify my purchase by saving a few bucks buying used. As soon as I ordered a “used” unit I began my buyers remorse dance but ended up biting the bullet and let it go. When my package arrived it was in decent shape, I opened it and noted that there were two bags that had been opened containing some hardware. That was the extent of being “used”. I inventoried the parts, everything was accounted for. I checked for mars, dents, scratches, mangled screws, etc.. I was as advertised, like new, I could not tell the difference. The unit and parts were well packed and all documentation was included. First hurdle and a great relief! Now for the infamous “bad” screw that seems to have haunted a few. I read a number of reviews and noted that the “bad” screw issue was addressed in a few of these an this is noted clearly in the instructions, that there is a screw behind the monitor mounting plates – someone included photos of this. This screw needs to be loosened or tightened for these arms to work well, and finally, tightened at the end to be sure the arms hold their position and can be adjusted without them slowly falling/drooping. I had to make a number of adjustments but expected this. These arms are well made, solid and offer a ton a versatility. I wound up drilling a hole in my desk for this mount since I was worried about the distance from my desk to the wall. The back edge of the base for this mount sits about 4″” forward from the back of my desk and is slightly (5″ – 6″) to the left of center – this works well for me as my desk is fairly deep (32″) and long (36″). I have no regrets purchasing this dual mounting arm. It is solid, clearly of good quality and adjusts easily – very smooth. I would not have been disappointed had I paid full price for this item, it is worth it – a good value. With that said, I would not hesitate to buy a used Amazon item again based on this experience, I saved quite a few $$ doing so.
If you are one of those who do not like reading manuals, you should start doing that with this product – read it carefully or else you will end up returning it.
The product is great and can be configured in any way. I’m using it for my 32-inch Samsung 4k monitor. Since it is a bit heavy, the monitor arm kept dropping so I was furious at first. If I had read the manual carefully I wouldn’t have missed the part where the vertical adjustment was described. Embarrassing for me, they pointed out the vertical adjustment part, but I could swear, that part was not there when I had a glance at it. So if it’s not working for you just like in some Youtube channels, don’t panic, just read the manual again and again or call amazon support.
I would recommend this to anyone because it is much cheaper than its competitors with similar features and quality.
La cosa pi importante: preparatevi con la pazienza perch chi ha scritto le istruzioni un maledetto demonio che dovrebbe ridisegnare a mano, per il resto della sua vita tutte le istruzioni di montaggio dei mobili Ikea.
Alla fine del montaggio ci si rende conto che non poi cos complicato, ma l’incompetenza dell’illustrazione rende tutto molto difficile, specialmente all inizio. Sono stato tentato pi di una volta di reimballare tutto e rispedire ad Amazon.
Tra l’altro avevo preso un Amazon wharehouse a 80, e se avete pazienza vi consiglio questo perche risparmierete anche 100 rispetto al nuovo e spesso avrete un prodotto nuovo reso da chi, quasi sicuramente, non ha avuto pazienza di comprendere le istruzioni.
Parlando del braccio, davvero ottimo. Resistente e snodabile, possibile registrare la durezza in modo da poterci bilanciare il monitor. La mia versione quella doppia e da un lato ho montato il monitor mentre dall’altro un vassoio porta laptop molto molto comodo (preso a parte qui su Amazon)
Un altra cosa che mi piaciuta la possibilit di far passare i cavi dentro il braccio per poter arrivare al monitor senza vedere molti cavi volanti.
Ora che l’ho montato sono soddisfatto e la qualit, unita al prezzo che ho pagato, mi ripagano di tutte le bestemmie tirate gi per montarlo.
Very good value even with somewhat limited range of motio
Overview
I have two 27 inch curved monitors on this. I like using these arm type mounts to free up desk space. Overall, not quite as goods as my Lx Desk Mount LCD Arm, Tall Pole (single mount) but also not nearly as expensive.
Pros
* easy installation
* solid mount to table
* Cable Management is good
* Monitors stay in place
Cons
* Would have liked a bit more forward reachbut not a deal breaker
Recommendation – Would buy it again, would recommend.
<---Click below if you found this review helpful--->
Can be a bit on the pricey side but the quality really makes up for it
I have an Acer Predator Z35P mounted on this which weighs just shy of 10KG without the stand, after adjusting the tension up high it holds it perfectly steady and is the easiest mount to assemble.
Manoeuvrability is great, even with this large heavy monitor I can just put it somewhere and it will happily stay.
Cheap mounts you’re lucky for it to hold up a light monitor and you have to loosen parts to adjust it to then tighten it again after. This thing needs none of that Once it’s in place, it’s not going anywhere unless you move it yourself.
I used a block of wood under mine in the clamp due to the design of my desk as the clamp didn’t sit well enough on the metal bar, it was slipping off and really the bar was too small so I would recommend getting a block of wood if your desk is like this and you want it to be more sturdy.
As good as the other reviews say it is
I picked this up on Prime Day, but it had been on my wish list for a couple of years. It works great. It’s easy to assemble. You can adjust the spring tension for the weight of your monitor. You can easily move the monitor almost anywhere you want it. I’m using it with a BenQ PD3200U and another smaller monitor. It would carry more weight if needed.
The only issue I have I can live with. My desk I can only mount this in one spot along the edge, which isn’t centered on the monitors. As well, my desk is in a corner situation, so rather than being right “behind” and centered between the monitors, this is about 45 degrees to where I sit, and so the monitors are not symmetrically arranged. The big PD3200U is away, and really it works well. The smaller one is kind of close to where the stand is mounted, and the arm has to be folded either out towards the wall or in over the desk behind the monitor. And, with the desk against the wall, it actually won’t quite let the monitor be where I want it without the arm hitting the wall. So I have to fold the arm in over the desk rather than out towards the wall, and with that, the monitor also will only get to about 2 or 3 ” from where I would want it. But, in the end, I noticed that the day I installed it, and since then, I don’t even think about it.
It moves well. It’s quick to assemble. It seems well made. I would buy it again. In my situation, 2 single arm stands would have been better. If your desk were square, rather than a corner desk like mine, there would be no issue at all. Even in my case, the added expense of two singles over one double is not worth it.
Recommended.
For the price this pretty much the best dual monitor arm you can buy. Everything essentially comes put together (which is why the box is so big). All you need to do is attach the monitor and slide the arm in and adjust the tension and you're set. Other top quality arms from ergotron will cost you quite a bit more. Get this on sale and it's an unbeatable deal
For the price this pretty much the best dual monitor arm you can buy. Everything essentially comes put together (which is why the box is so big). All you need to do is attach the monitor and slide the arm in and adjust the tension and you’re set. Other top quality arms from ergotron will cost you quite a bit more. Get this on sale and it’s an unbeatable deal
Recommended as a practical stand for dual monitors.
Bought this for my home office but didn’t want to spend a fortune. Really impressed with the quality and sturdiness of these. They are not the prettiest but then I’m looking at my screens not the stand!
Fairly straightforward to assemble, clamped to my desk easily, easy to set-up. One word of warning if you have your desk against a wall; it will limit how far back your screens can go, not an issue for me but worth knowing in advance. Recommend. .
This is doing a great job of holding up two monitors including a 27” (larger than recommended). It’s easy to assemble though I needed to tighten up the head end to keep the monitors from flopping forward. Makes positioning multiple monitors pretty easy
This is doing a great job of holding up two monitors including a 27″ (larger than recommended). It’s easy to assemble though I needed to tighten up the head end to keep the monitors from flopping forward. Makes positioning multiple monitors pretty easy
Top!
Eine perfekte Monitorhalterung! Ich hatte schon dss Original von Ergotron, wusste also, was mich erwartet 🙂 Wie zu erwarten ist alles perfekt – die Halterung ist genauso gut wie dss Original. Sie hlt einen 27″-Monitor ohne Probleme (auch ein etwas lteres und schwereres Modell) und lsst sich super schwenken.
Beim nchsten Mal wird es mit Sicherheit wieder diese Haltung!
Excellent stands for a dual monitor setup
A great way of freeing up desk space. Once the monitors are mounted on these arms it makes it very simple to position them as you require. Note that the arms do need space behind your desk as they stick out backwards. in my configuration this means that I have a 22cm gap between the back edge of the desk and the wall.
Muy buen soporte
He de decir que no esperaba mucho de un soporte bsico como este, pero me he encontrado con unos brazos muy robustos y que soportan muchsimo peso (tengo dos monitores de 27” AOC) y no se mueven nada. La sujecin de la mesa tiene mucha base, por lo que no hay que preocuparse por la estabilidad, y los brazos son rgidos pero sin embargo a la hora de moverlos, se mueven con mucha facilidad. No tienen vibracin alguna y de momento, salvo que ocurra algo, son una pasada.
Vienen con la tornillera lista para el monitor, con dos tipos de tornillos, para ponerlos a mano o con destornillador.
Sin duda muy buena compra.
Zu befestigender Monitor: Dell U3415W (34″ Ultra-wide, 10.8 kg, vermutlich mit Fu)
Habe dieses Produkt im November 2018 fr 90,84 EUR am Amazon Black Friday erworben. Ich muss sagen, dass es eine gute Wahl war! Der Amazon Basics Schwenkarm ist aus meiner Sicht jeden Cent wert.
Zur Auswahl stand neben diesem Schwenkarm von Amazon Basics auch noch das Produkt von Ergotron (LX Desk Mount), sowie Fleximounts D7L. Mit diesen mchte ich hier vergleichen.
Aus meiner Sicht sind der Amazon Basics Schwenkarm und der Ergotron LX Desk Mount bis auf die Farbgebung identisch. Der Unterschied zum Fleximounts ist aus meiner Sicht nur die etwas hhere Tragkraft des Fleximounts und am oberen Teil des Arms ist bei dem Modell noch eine Kunststoffabdeckung (verschwindet aber ja eh hinter dem Monitor…) Zumal die Preisdifferenz 50 EUR (oder hher) zu dem Zeitpunkt betrug. Alle drei lassen sich entweder a) per Klemme am Tisch montieren oder knnen b) ber ein Bohrloch und eine Schraube befestigt werden.
Der Schwenkarm ist sehr einfach zu installieren. Den VESA Mount am Monitor befestigen, das Unterteil am Tisch verschrauben, Schwenkarm-Teile aufeinanderstecken, Kabel ziehen, fertig! Die Kabel vom Monitor (1x USB, 1x HDMI,, 1x DisplayPort) knnen locker im Arm verstaut werden und werden ber Kabelbinder dort fixiert (etwas Spielraum lassen auf Hhe des Gelenks!!!)
Vorteile durch den Schwenkarm:
* Meine Nackenschmerzen und/oder Kopfschmerzen bei einem langen Tag am Bildschirm sind verschwunden.
* Schreibtisch sieht sehr aufgerumt aus
* Sehr flexible und schnelle Anpassung an wechselnde Bedrfnisse ohne irgendetwas verrcken zu mssen
* leicht einstellbar (sowohl von der Positionierung des Monitors, als auch die Einstellung des Arms bei der Erst-Montage [Feder, etc.])
* wackelt nicht und verstellt sich nicht automatisch
* Qualitativ hochwertig
Ich kann jedem der mit dem Gedanken spielt sich einen Schwenkarm zuzulegen, nur empfehlen diesen hier in die engere Auswahl zu nehmen.
Wenn Ihnen diese Rezension bei Ihrer Kaufentscheidung geholfen hat, freue ich mich ber einen Klick auf “Ntzlich”.
Super Produkt für guten Preis, schwenkt aber weit aus
Habe den dual Monitor halter fr 140 im Amazon Frhlingssale gekauft. Ich habe in meinem Setup einen 27″ Haupt und 24″ zweit Monitor. Die vielfltigen Einstellungsmglichkeiten sorgen fr eine gut Ergonomie, gerade fr viele Stunden am PC. Bin mit dem Produkt sehr zufrieden. Einziger negativ Punkt (und daher auch nur 4 Sterne) ist, dass mein einen ca 20cm Abstand zwischen Tisch und Wand (bei der Klemmen-Version) brauch, da die Arme sehr weit nach hinten ausschwenken.